# packages

pkgId: ac5059bcbec1b0954e3397f124d7a6efc57c533b490e74268c72e39731127017
name: perl-Net-IP-Match-Regexp
arch: src
version: 1.01
epoch: 0
release: 25.fc33
summary: Efficiently match IP addresses against ranges
url: https://metacpan.org/release/Net-IP-Match-Regexp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-Match-Regexp-1.01-25.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to check an IP address against one or more IP
  ranges. It employs Perl's highly optimized regular expression engine to do
  the hard work, so it is very fast. It is optimized for speed by doing the
  match against a regexp which implicitly checks the broadest IP ranges
  first. An advantage is that the regexp can be computed and stored in
  advance (in source code, in a database table, etc) and reused, saving much
  time if the IP ranges don't change too often. The match can optionally
  report a value (e.g. a network name) instead of just a boolean, which makes
  module useful for mapping IP ranges to names or codes or anything else.


pkgId: ba012e6c4169f2dc30c363dd0faf04c12cc3b6f2e5ce9375f81a0d7779354463
name: perl-Net-IP-Minimal
arch: src
version: 0.06
epoch: 0
release: 19.fc33
summary: Minimal functions from Net::IP
url: https://metacpan.org/release/Net-IP-Minimal
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IP-Minimal-0.06-19.fc33.src.rpm
checksum_type: sha256
description:
  Net::IP is very feature complete, but I found I was only using three of its
  functions and it uses quite a bit of memory.


pkgId: bf52102b82cc8b3e0f6106e2e3ba718e45ab3fe001adf03ba0be1dbf882f2dba
name: perl-Net-IPv4Addr
arch: src
version: 0.10
epoch: 0
release: 37.fc33
summary: Perl extension for manipulating IPv4 addresses
url: https://metacpan.org/release/Net-IPv4Addr
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IPv4Addr-0.10-37.fc33.src.rpm
checksum_type: sha256
description:
  Net::IPv4Addr provides functions for parsing IPv4 addresses both in traditional
  address/netmask format and in the new CIDR format. There are also methods for
  calculating the network and broadcast address and also to see check if a given
  address is in a specific network.


pkgId: 313abee7c5800a876f2e344a354cfd08563702786f070a8ea4939bba69328a98
name: perl-Net-IPv6Addr
arch: src
version: 1.01
epoch: 0
release: 3.fc33
summary: Perl module to check validity of IPv6 addresses
url: https://metacpan.org/release/Net-IPv6Addr
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-IPv6Addr-1.01-3.fc33.src.rpm
checksum_type: sha256
description:
  Net::IPv6Addr checks strings for valid IPv6 addresses, as specified in
  RFC1884. You throw possible addresses at it, it either accepts them or throws
  an exception.


pkgId: 77e655eca2bf294697dcb3d117366d747a395e2b6e8b20d371a27488f0779cbc
name: perl-Net-Jabber
arch: src
version: 2.0
epoch: 0
release: 43.fc33
summary: Net::Jabber - Jabber Perl Library
url: https://metacpan.org/release/Net-Jabber
rpm_license: (GPL+ or Artistic) or LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Jabber-2.0-43.fc33.src.rpm
checksum_type: sha256
description:
  Net::Jabber provides a Perl user with access to the Jabber Instant
  Messaging protocol.

  For more information about Jabber visit:

      http://www.jabber.org


pkgId: 137eb1b6fe85cf9fa78bb9effe0c3218a1257c39219980b723e3a609e764221b
name: perl-Net-LDAP-Server
arch: src
version: 0.43
epoch: 0
release: 14.fc33
summary: Net::LDAP::Server Perl module
url: https://metacpan.org/release/Net-LDAP-Server
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LDAP-Server-0.43-14.fc33.src.rpm
checksum_type: sha256
description:
  Net::LDAP::Server provides the protocol handling for an LDAP server. You
  can subclass it and implement the methods you need. Then you just
  instantiate your subclass and call its C<handle> method to establish a
  connection with the client.


pkgId: 2446caa38cbf025ba73640a7ce35339801750b6b1235175d47a75a43a42afede
name: perl-Net-LibIDN
arch: src
version: 0.12
epoch: 0
release: 38.fc33
summary: Perl bindings for GNU LibIDN
url: https://metacpan.org/release/Net-LibIDN
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LibIDN-0.12-38.fc33.src.rpm
checksum_type: sha256
description:
  Provides perl bindings for GNU Libidn, a C library for handling
  Internationalized Domain Names according to IDNA (RFC 3490), in
  a way very much inspired by Turbo Fredriksson's PHP-IDN.


pkgId: 2ee5eae5b550be12080e209fc9ae6a250459351c88be27ffa9d24b38271d4b00
name: perl-Net-LibIDN2
arch: src
version: 1.01
epoch: 0
release: 4.fc33
summary: Perl binding for GNU Libidn2
url: https://metacpan.org/release/Net-LibIDN2
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-LibIDN2-1.01-4.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides bindings for GNU Libidn2, a C library for handling
  internationalized domain names according to IDNA 2008 (RFC 5890, RFC 5891,
  RFC 5892, RFC 5893).


pkgId: ffe15542503521c532587928bed761e5f6d58cf091577b02c3edd3a68e9534e0
name: perl-Net-MQTT-Simple
arch: src
version: 1.24
epoch: 0
release: 4.fc33
summary: Minimal MQTT version 3 interface
url: https://metacpan.org/release/Net-MQTT-Simple
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-MQTT-Simple-1.24-4.fc33.src.rpm
checksum_type: sha256
description:
  This module consists of only one file and has no dependencies except core
  Perl modules, making it suitable for embedded installations where CPAN
  installers are unavailable and resources are limited. Only basic MQTT
  functionality is provided.


pkgId: 7a8228cafbf658aa2c8046fc67ccad35873ecf1b06071427834ab26f6f4a9a3e
name: perl-Net-NBName
arch: src
version: 0.26
epoch: 0
release: 39.fc33
summary: NetBIOS Name Service Requests
url: https://metacpan.org/release/Net-NBName
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-NBName-0.26-39.fc33.src.rpm
checksum_type: sha256
description:
  Net::NBName is a class that allows you to perform simple NetBIOS Name
  Service Requests in your Perl code. It performs these NetBIOS operations
  over TCP/IP using Perl's built-in socket support.


pkgId: b159c9aaecb12e9dfd16f5a7b24e90d4a96322e52e7b901f1dc3f17a69126c30
name: perl-Net-Netmask
arch: src
version: 1.9104
epoch: 0
release: 8.fc33
summary: Perl module for manipulating and looking up IP network blocks
url: https://metacpan.org/release/Net-Netmask
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Netmask-1.9104-8.fc33.src.rpm
checksum_type: sha256
description:
  Net::Netmask parses and understands IPv4 and IPv6 CIDR blocks (see
  <https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing> for more
  information on CIDR blocks). There are also functions to insert a network
  block into a table and then later look up network blocks by an IP address
  using that table.


pkgId: c0dff330f6fe68b1eaa0ad5b1788bb78a850727fb896d813ca6cc32c57828dc3
name: perl-Net-OAuth
arch: src
version: 0.28
epoch: 0
release: 23.fc33
summary: OAuth protocol support library for Perl
url: https://metacpan.org/release/Net-OAuth
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OAuth-0.28-23.fc33.src.rpm
checksum_type: sha256
description:
  Perl implementation of OAuth, an open protocol to allow secure API
  authentication in a simple and standard method from desktop and web
  applications. In practical terms, a mechanism for a Consumer to request
  protected resources from a Service Provider on behalf of a user.


pkgId: c2430bbdc1e20a85c2dcd23d6808682c4452c2446266bbb1db24d14cc7426954
name: perl-Net-OpenID-Common
arch: src
version: 1.20
epoch: 0
release: 14.fc33
summary: Libraries shared between Net::OpenID::Consumer and Net::OpenID::Server
url: https://metacpan.org/release/Net-OpenID-Common
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Common-1.20-14.fc33.src.rpm
checksum_type: sha256
description:
  The Consumer and Server implementations share a few libraries which live
  with this module. This module is here largely to hold the version number
  and this documentation, though it also incorporates some utility functions
  inherited from previous versions of Net::OpenID::Consumer.


pkgId: a5287e654c9ae390d1da70d293f05e7d36e44a8733a973c02af08f9a769a6eed
name: perl-Net-OpenID-Consumer
arch: src
version: 1.18
epoch: 0
release: 14.fc33
summary: Library for consumers of OpenID identities
url: https://metacpan.org/release/Net-OpenID-Consumer
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Consumer-1.18-14.fc33.src.rpm
checksum_type: sha256
description:
  This is the Perl API for (the consumer half of) OpenID, a distributed
  identity system based on proving you own a URL, which is then your
  identity.


pkgId: ce3cbd4258299601278fad5702aaf02de9ed734b5eef483f744cbdeb2cb8058c
name: perl-Net-OpenID-Server
arch: src
version: 1.09
epoch: 0
release: 17.fc33
summary: Library for building your own OpenID server/provider
url: https://metacpan.org/release/Net-OpenID-Server
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-OpenID-Server-1.09-17.fc33.src.rpm
checksum_type: sha256
description:
  This is the Perl API for (the server half of) OpenID, a distributed
  identity system based on proving you own a URL, which is then your
  identity.


pkgId: 642b91f2a6d3b51fa72ca878b451a28c8465291ed028d54f6eec7be237ecbbb5
name: perl-Net-POP3S
arch: src
version: 0.11
epoch: 0
release: 3.fc33
summary: SSL/STARTTLS support for Net::POP3
url: https://metacpan.org/release/Net-POP3S
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-POP3S-0.11-3.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::POP3, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::POP3. You may use
  all the friendly options that came bundled with Net::POP3. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: b1ad6415c1c4bfd4ec451223727604407f8b8e5baf778b58537dde06307c4686
name: perl-Net-Patricia
arch: src
version: 1.22
epoch: 0
release: 27.fc33
summary: Patricia Trie perl module for fast IP address lookups
url: https://metacpan.org/release/Net-Patricia
rpm_license: GPLv2+ and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Patricia-1.22-27.fc33.src.rpm
checksum_type: sha256
description:
  This module uses a Patricia Trie data structure to quickly perform IP
  address prefix matching for applications such as IP subnet, network or
  routing table lookups.  The data structure is based on a radix tree using a
  radix of two, so sometimes you see patricia implementations called "radix"
  as well.  The term "Trie" is derived from the word "retrieval" but is
  pronounced like "try".  Patricia stands for "Practical Algorithm to
  Retrieve Information Coded as Alphanumeric", and was first suggested for
  routing table lookups by Van Jacobsen.  Patricia Trie performance
  characteristics are well-known as it has been employed for routing table
  lookups within the BSD kernel since the 4.3 Reno release.


pkgId: c41717b69d6edbabbbc37640eeafc74ba3dc71900a0b0e7da57d641af646c521
name: perl-Net-Pcap-Easy
arch: src
version: 1.4210
epoch: 0
release: 17.fc33
summary: Convenience functions to make Net::Pcap easier to use
url: https://metacpan.org/release/Net-Pcap-Easy
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Pcap-Easy-1.4210-17.fc33.src.rpm
checksum_type: sha256
description:
  This module is little more than a collection of macros and convenience
  functions. Net::Pcap does all the real work (of lifting libpcap into
  perl anyway).


pkgId: 7a20e3fadc65377b3ad4d22038838d414fb2b5a21da7c0aff5a6ba5b52f28022
name: perl-Net-Ping-External
arch: src
version: 0.15
epoch: 0
release: 20.fc33
summary: Cross-platform interface to ICMP "ping" utilities
url: https://metacpan.org/release/Net-Ping-External
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Ping-External-0.15-20.fc33.src.rpm
checksum_type: sha256
description:
  Net::Ping::External is a module which interfaces with the "ping" command on
  many systems. It presently provides a single function, ping(), that takes
  in a hostname and (optionally) a timeout and returns true if the host is
  alive, and false otherwise. Unless you have the ability (and willingness)
  to run your scripts as the superuser on your system, this module will
  probably provide more accurate results than Net::Ping will.


pkgId: e2697f8dcb79f4b02b77caffd9d3b7786fccaf3aaee08426db86b86551ca515e
name: perl-Net-RawIP
arch: src
version: 0.25
epoch: 0
release: 37.fc33
summary: Perl extension for manipulating raw IP packets using libpcap
url: https://metacpan.org/release/Net-RawIP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-RawIP-0.25-37.fc33.src.rpm
checksum_type: sha256
description:
  This package provides a Perl class  which can be used for creating,
  manipulating and sending raw IP packets with optional features for
  manipulating Ethernet headers.


pkgId: 23864938dc6ef724fec5676eac74f6291b180e84ecfe3ab80421dbf9904a2c39
name: perl-Net-SFTP
arch: src
version: 0.12
epoch: 0
release: 9.fc33
summary: Secure File Transfer Protocol client
url: https://metacpan.org/release/Net-SFTP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SFTP-0.12-9.fc33.src.rpm
checksum_type: sha256
description:
  Net::SFTP is a pure-Perl implementation of the Secure File Transfer
  Protocol (SFTP) - file transfer built on top of the SSH2 protocol.
  Net::SFTP uses Net::SSH::Perl to build a secure, encrypted tunnel through
  which files can be transferred and managed. It provides a subset of the
  commands listed in the SSH File Transfer Protocol IETF draft, which can be
  found at http://www.openssh.com/txt/draft-ietf-secsh-filexfer-00.txt.


pkgId: bd7dd4c85cf351488e82bc16df6913e8f0b6aa59211fb6fafd7282e013885aa4
name: perl-Net-SFTP-Foreign
arch: src
version: 1.91
epoch: 0
release: 3.fc33
summary: SSH File Transfer Protocol client
url: https://metacpan.org/release/Net-SFTP-Foreign
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SFTP-Foreign-1.91-3.fc33.src.rpm
checksum_type: sha256
description:
  Net::SFTP::Foreign is a Perl client for the SFTP version 3 as defined in the SSH
  File Transfer Protocol IETF draft, draft-ietf-secsh-filexfer-02.txt, included on
  this package distribution, on the rfc directory.

  Net::SFTP::Foreign uses any compatible ssh command installed on the system (for
  instance, OpenSSH ssh) to establish the secure connection to the remote server.

  A wrapper module Net::SFTP::Foreign::Compat is also provided for compatibility
  with Net::SFTP.


pkgId: e4b3a9c091cd964ef7d5c0523c88a9e4c84f2aaa33006d12e42701220b706ca7
name: perl-Net-SMTPS
arch: src
version: 0.10
epoch: 0
release: 3.fc33
summary: SSL/STARTTLS support for Net::SMTP
url: https://metacpan.org/release/Net-SMTPS
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SMTPS-0.10-3.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::SMTP, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::SMTP. You may use
  all the friendly options that came bundled with Net::SMTP. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: ce9ba898a9a6166526696a04477e891c68dbb1d4147cbe345987f9fae794fc2e
name: perl-Net-SNMP
arch: src
version: 6.0.1
epoch: 0
release: 28.fc33
summary: Object oriented interface to SNMP
url: https://metacpan.org/release/Net-SNMP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SNMP-6.0.1-28.fc33.src.rpm
checksum_type: sha256
description:
  The Net::SNMP module implements an object oriented interface to the
  Simple Network Management Protocol.  Perl applications can use the
  module to retrieve or update information on a remote host using the
  SNMP protocol.  The module supports SNMP version-1, SNMP version-2c
  (Community-Based SNMPv2), and SNMP version-3.  The Net::SNMP module
  assumes that the user has a basic understanding of the Simple Network
  Management Protocol and related network management concepts.


pkgId: ab4fd7d93bc8f73f21c34f6a83529567638474071c8c731be4207640ed433635
name: perl-Net-SSH
arch: src
version: 0.09
epoch: 0
release: 33.fc33
summary: Perl extension for secure shell
url: https://metacpan.org/release/Net-SSH
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH-0.09-33.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to ssh.  It is a simple
  wrapper around the system `ssh' command.  For an all-perl
  implementation that does not require the system `ssh' command, see
  Net::SSH::Perl.


pkgId: 1fa967c3cbfb0d5407edb31bc0312c4e96581fbaae08a79e00bdbac9267f54b1
name: perl-Net-SSH-Expect
arch: src
version: 1.09
epoch: 0
release: 35.fc33
summary: Net-SSH-Expect - SSH wrapper to execute remote commands
url: https://metacpan.org/release/Net-SSH-Expect
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH-Expect-1.09-35.fc33.src.rpm
checksum_type: sha256
description:
  This module is a wrapper to the *ssh* executable that is available in
  your system's *$PATH*. Use this module to execute commands on the
  remote SSH server. It authenticates with the user and password you
  passed in the constructor's attributes "user" and "password".

  Once an ssh connection was started using the "connect()" method it will
  remain open until you call the "close()" method. This allows you execute
  as many commands as you want with the "exec()" method using only one
  connection. This is a better approach over other ssh wrapper
  implementations, i.e: Net::SCP, Net::SSH and Net::SCP::Expect, that
  start a new ssh connection each time a remote command is issued or a
  file is transfered.

  It uses *Expect.pm* module to interact with the SSH server. A
  "get_expect()" method is provided so you can obtain the internal
  "Expect" object connected to the SSH server. Use this only if you have
  some special need that you can't do with the "exec()" method.

  This module was inspired by Net::SCP::Expect
  <http://search.cpan.org/~djberg/Net-SCP-Expect-0.12/Expect.pm>
  and by Net::Telnet and some of its methods work the same as these two
  modules.


pkgId: 7e9dd9e4ccaf8b8fe9e505e83f3650f0ee4791da1d148b7af04f5e5eb1cd7f41
name: perl-Net-SSH-Perl
arch: src
version: 2.14
epoch: 0
release: 10.fc33
summary: SSH (Secure Shell) client
url: https://metacpan.org/release/Net-SSH-Perl
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH-Perl-2.14-10.fc33.src.rpm
checksum_type: sha256
description:
  Net::SSH::Perl is a mostly-Perl module implementing an SSH (Secure Shell)
  client. It is compatible with both the SSH-1 and SSH-2 protocols.


pkgId: cdfacf5077895c33e2844f802a186830607af719df25f37abf724d070c1e1b3f
name: perl-Net-SSH2
arch: src
version: 0.71
epoch: 0
release: 3.fc33
summary: Support for the SSH 2 protocol via libSSH2
url: https://metacpan.org/release/Net-SSH2
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSH2-0.71-3.fc33.src.rpm
checksum_type: sha256
description:
  Net::SSH2 is a perl interface to the libssh2 (http://www.libssh2.org)
  library. It supports the SSH2 protocol (there is no support for SSH1) with
  all of the key exchanges, ciphers, and compression of libssh2.


pkgId: bc3906e28a9f58d7af183ca70076e7675a04b84c8fc0b0f4da0fbad28140bf5c
name: perl-Net-SSLGlue
arch: src
version: 1.058
epoch: 0
release: 13.fc33
summary: Add/extend SSL support for common perl modules
url: https://metacpan.org/release/Net-SSLGlue
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSLGlue-1.058-13.fc33.src.rpm
checksum_type: sha256
description:
  Some commonly used perl modules don't have SSL support at all, even if the
  protocol would support it. Others have SSL support, but most of them don't
  do proper checking of the servers certificate.

  The Net::SSLGlue::* modules try to add SSL support or proper certificate to
  these modules. Currently is support for the following modules available:

  - Net::SMTP - add SSL from beginning or using STARTTLS
  - Net::LDAP - add proper certificate checking
  - LWP - add proper certificate checking


pkgId: 8d034c193e8e6bdfd1c14fc1fd6b35a8c6ba0c504bf59e5a1d14c45472db1601
name: perl-Net-SSLeay
arch: src
version: 1.88
epoch: 0
release: 9.fc33
summary: Perl extension for using OpenSSL
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-SSLeay-1.88-9.fc33.src.rpm
checksum_type: sha256
description:
  This module offers some high level convenience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL API of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: a26de5c5e1bd6fdd224ca430856c1035e02e3c2670ca307e6aec07bd1fc47370
name: perl-Net-STOMP-Client
arch: src
version: 2.3
epoch: 0
release: 13.fc33
summary: STOMP object oriented client module
url: https://metacpan.org/release/Net-STOMP-Client
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-STOMP-Client-2.3-13.fc33.src.rpm
checksum_type: sha256
description:
  This module provides an object oriented client interface to interact with
  servers supporting STOMP (Streaming Text Orientated Messaging Protocol). It
  supports the major features of messaging brokers: SSL, asynchronous I/O,
  receipts and transactions.


pkgId: 73dfa90b3a21e14e09974bb41c0695206321d6dd821177d209e83bbd0be49791
name: perl-Net-Server
arch: src
version: 2.009
epoch: 0
release: 10.fc33
summary: Extensible, general Perl server engine
url: https://metacpan.org/release/Net-Server
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-2.009-10.fc33.src.rpm
checksum_type: sha256
description:
  An extensible, class oriented module written in perl and intended to
  be the back end layer of internet protocol servers.


pkgId: 3030d6d76a33314305fffc02e9dcec00fafc5ecd1e057cd6a6ebb7b64b5fa9a8
name: perl-Net-Server-Coro
arch: src
version: 1.3
epoch: 0
release: 18.fc33
summary: Co-operative multithreaded server using Coro
url: https://metacpan.org/release/Net-Server-Coro
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-Coro-1.3-18.fc33.src.rpm
checksum_type: sha256
description:
  Net::Server::Coro implements multithreaded server for the Net::Server
  architecture, using Coro and Coro::Socket to make all reads and writes non-
  blocking. Additionally, it supports non-blocking SSL negotiation.


pkgId: 5dbeca2303a9b26b138942ef33dcfb2020613cfe42c3c8cfcd46d3c2bae9e067
name: perl-Net-Server-SS-PreFork
arch: src
version: 0.05
epoch: 0
release: 29.fc33
summary: Hot-deployable variant of Net::Server::PreFork
url: https://metacpan.org/release/Net-Server-SS-PreFork
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Server-SS-PreFork-0.05-29.fc33.src.rpm
checksum_type: sha256
description:
  Net::Server::SS::PreFork is a Net::Server personality, extending
  Net::Server::PreFork. It can be run by the start_server script of
  Server::Starter.


pkgId: 4baac6d4c506f6a53baab48a7e9d3a0f3313da9b0f53508a397e29e5995462e0
name: perl-Net-Statsd
arch: src
version: 0.12
epoch: 0
release: 14.fc33
summary: Sends statistics to the stats daemon over UDP
url: https://metacpan.org/release/Net-Statsd
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Statsd-0.12-14.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a client for a statsd statistics collection server, such
  as the one in use at Etsy.com.

  You want to use this module to track statistics in your Perl application, such
  as how many times a certain event occurs (user logins in a web application, or
  database queries issued), or you want to time and then graph how long certain
  events take, like database queries execution time or time to download a certain
  file, etc.


pkgId: 12e61f0db57febf3d618d6f8c210cf475027408819c55b89de86fcbbef2e1ee4
name: perl-Net-Statsd-Server
arch: src
version: 0.20
epoch: 0
release: 13.fc33
summary: Library for the Perl port of Flickr/Etsy's statsd metrics daemon
url: https://metacpan.org/release/Net-Statsd-Server
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Statsd-Server-0.20-13.fc33.src.rpm
checksum_type: sha256
description:
  Net::Statsd::Server is the server component of statsd. It implements a daemon
  that listens on a given host/port for incoming UDP packets and dispatches them
  to whatever you want, including Graphite or your console.  Look into the
  Net::Statsd::Server::Backend::* name space to know all the possibilities, or
  write a back-end yourself.


pkgId: 2d1656464dbdfea0331c7d13f2b206384b3471238a13e1be8efb6a1e7236b606
name: perl-Net-Stomp
arch: src
version: 0.60
epoch: 0
release: 4.fc33
summary: Stomp client module for Perl
url: https://metacpan.org/release/Net-Stomp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Stomp-0.60-4.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to write a Stomp client. Stomp, the Streaming Text
  Orientated Messaging Protocol, is a simple and easy to implement protocol
  for working with Message Orientated Middleware.

  Net::Stomp can be used to communicate with Apache ActiveMQ, an
  enterprise-level Java Message Service 1.1 (JMS) message broker.


pkgId: 32e68089153229cd8b06244d4c215ac414eff511fd4903f6b9cbb4165e3b0431
name: perl-Net-Telnet
arch: src
version: 3.04
epoch: 0
release: 15.fc33
summary: Interact with TELNET port or other TCP ports
url: https://metacpan.org/release/Net-Telnet
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Telnet-3.04-15.fc33.src.rpm
checksum_type: sha256
description:
  Net::Telnet allows you to make client connections to a TCP port and do
  network I/O, especially to a port using the TELNET protocol. Simple I/O
  methods such as print, get, and getline are provided. More sophisticated
  interactive features are provided because connecting to a TELNET port
  ultimately means communicating with a program designed for human interaction.
  These interactive features include the ability to specify a time-out and to
  wait for patterns to appear in the input stream, such as the prompt from a
  shell. IPv6 support is available when using perl 5.14 or later.


pkgId: 008897656d2e57e7dae792c79b1e527a2b5e434e7e927815ea32f959d48e2dae
name: perl-Net-Twitter
arch: src
version: 4.01043
epoch: 0
release: 11.fc33
summary: Perl interface to the Twitter API
url: https://metacpan.org/release/Net-Twitter
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Twitter-4.01043-11.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the Twitter APIs. See
  http://dev.twitter.com/doc for a full description of the Twitter APIs.


pkgId: 078536ed2a4c43bb42fcbfe862c2d4e4b5e9452fe3991c6a31f292223279bfac
name: perl-Net-Whois
arch: src
version: 1.9
epoch: 0
release: 27.fc33
summary: Get and parse "whois" domain data from InterNIC
url: https://metacpan.org/release/Net-Whois
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Whois-1.9-27.fc33.src.rpm
checksum_type: sha256
description:
  Net::Whois::Domain new() attempts to retrieve and parse the given
  domain's "whois" information from the InterNIC (whois.internic.net). If
  the server could not be contacted, is too busy, or otherwise does not
  process the query then the constructor does not return a reference and
  your object is undefined. If the constructor returns a reference, that
  reference can be used to access the various attributes of the domains'
  whois entry assuming that there was a match. The member function ok
  returns 1 if a match 0 if no match.


pkgId: dbcc2204a67fdbb5c386c7f7e7c41828933b3d58f5f8400502ed93a1192db2f2
name: perl-Net-Whois-IP
arch: src
version: 1.19
epoch: 0
release: 15.fc33
summary: Perl extension for looking up the whois information for ip addresses
url: https://metacpan.org/release/Net-Whois-IP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Whois-IP-1.19-15.fc33.src.rpm
checksum_type: sha256
description:
  Perl module to allow whois lookup of ip addresses. This module should
  recursively query the various whois providers until it gets the more
  detailed information including either TechPhone or OrgTechPhone by default;
  however, this is overrideable.


pkgId: 2f3d22d2e26656df419091edbd5aad676288a166574ab3b23719cc6bc67cd972
name: perl-Net-Whois-Raw
arch: src
version: 2.99.029
epoch: 0
release: 2.fc33
summary: Get Whois information for domains
url: https://metacpan.org/release/Net-Whois-Raw
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-Whois-Raw-2.99.029-2.fc33.src.rpm
checksum_type: sha256
description:
  Net::Whois::Raw queries WHOIS servers about domains. The module supports
  recursive WHOIS queries. Also queries via HTTP is supported for some TLDs.


pkgId: 9101b18b3d8e08be958d68fe68d3acfb35614a725fd8d83599480206fafb9047
name: perl-Net-XMPP
arch: src
version: 1.05
epoch: 0
release: 17.fc33
summary: Net::XMPP - perl XMPP library
url: https://metacpan.org/release/Net-XMPP
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Net-XMPP-1.05-17.fc33.src.rpm
checksum_type: sha256
description:
  Net::XMPP provides a Perl user with access to the Extensible
  Messaging and Presence Protocol (XMPP).

  For more information about XMPP visit:

       http://www.xmpp.org


pkgId: 20025683ec7405e20cae2219553af4be76fff00bed11bf88d966b35219fa6221
name: perl-NetAddr-IP
arch: src
version: 4.079
epoch: 0
release: 15.fc33
summary: Manages IPv4 and IPv6 addresses and subnets
url: https://metacpan.org/release/NetAddr-IP
rpm_license: GPLv2+ and (GPLv2+ or Artistic clarified)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-NetAddr-IP-4.079-15.fc33.src.rpm
checksum_type: sha256
description:
  This module provides an object-oriented abstraction on top of IP addresses
  or IP subnets, that allows for easy manipulations.


pkgId: c8c8e63f89b146f79ac67176634b9259e0b9e6297d2a84217596c716f94ed946
name: perl-NetPacket
arch: src
version: 1.7.2
epoch: 0
release: 6.fc33
summary: Assemble/disassemble network packets at the protocol level
url: https://metacpan.org/release/NetPacket
rpm_license: Artistic 2.0 and CC-BY
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-NetPacket-1.7.2-6.fc33.src.rpm
checksum_type: sha256
description:
  NetPacket provides a base class for a cluster of modules related to decoding
  and encoding of network protocols. Each NetPacket descendant module knows how
  to encode and decode packets for the network protocol it implements. Consult
  the documentation for the module in question for protocol-specific
  implementation.


pkgId: 6c84c4b403e5fccdeed8dda828685bfabfe98f3677d5a2fbc3b4fc79f686f003
name: perl-NetPacket-LLC
arch: src
version: 0.01
epoch: 0
release: 28.fc33
summary: Assemble and disassemble IEEE 802.3 LLC protocol packets
url: https://metacpan.org/release/NetPacket-LLC
rpm_license: Artistic clarified
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-NetPacket-LLC-0.01-28.fc33.src.rpm
checksum_type: sha256
description:
  NetPacket::LLC provides a set of routines for assembling and disassembling
  packets using the IEEE standard LLC protocol layer.


pkgId: 90efa73a05e18b48b091d12c43f7d2fff6fd33753c2812a753ec594bb63173fb
name: perl-NetPacket-SpanningTree
arch: src
version: 0.01
epoch: 0
release: 29.fc33
summary: Assemble and disassemble IEEE 802.1D Spanning Tree protocol packets
url: https://metacpan.org/release/NetPacket-SpanningTree
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-NetPacket-SpanningTree-0.01-29.fc33.src.rpm
checksum_type: sha256
description:
  NetPacket::SpanningTree provides a set of routines for assembling and
  disassembling packets using the IEEE standard Spanning Tree Protocol.
  Spanning Tree is a layer 2 protocol defined by the IEEE 802.1D
  specification.


pkgId: 276bf0e69dd1b127be39f75593091a93f9e75053b8dd627359cc64938a6dc1d4
name: perl-Newt
arch: src
version: 1.08
epoch: 0
release: 57.fc33
summary: Perl bindings for the Newt library
url: https://metacpan.org/release/Newt-1.08
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Newt-1.08-57.fc33.src.rpm
checksum_type: sha256
description:
  This package provides Perl bindings for the Newt widget
  library, which provides a color text mode user interface.


pkgId: d0901e09abbdf0008c57ca6086f65766e34c805194d148cb0046865a31c0bd55
name: perl-Nmap-Parser
arch: src
version: 1.37
epoch: 0
release: 7.fc33
summary: Parse nmap scan data with perl
url: https://metacpan.org/release/Nmap-Parser
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Nmap-Parser-1.37-7.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a interface to the information contained in an
  nmap scan. It is implemented by parsing the XML scan data that is
  generated by nmap. This will enable anyone who utilizes nmap to quickly
  create fast and robust security scripts that utilize the powerful port
  scanning abilities of nmap.


pkgId: 96d973b87f267b9c9ea68cadaff900818d5cb67f41bb0a92639c11c1d6063e72
name: perl-No-Worries
arch: src
version: 1.6
epoch: 0
release: 6.fc33
summary: Perl coding without worries
url: https://metacpan.org/release/No-Worries
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-No-Worries-1.6-6.fc33.src.rpm
checksum_type: sha256
description:
  This module and its sub-modules ease coding by providing consistent convenient
  functions to perform frequently used programming tasks.


pkgId: 1c9072b2ec1cc12649e66d37a15cb18930cf403bc60743a98a46bb7e19ded03e
name: perl-Number-Bytes-Human
arch: src
version: 0.11
epoch: 0
release: 13.fc33
summary: Convert byte count to human readable format
url: https://metacpan.org/release/Number-Bytes-Human
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Bytes-Human-0.11-13.fc33.src.rpm
checksum_type: sha256
description:
  This module is designed to format byte counts to usual readable
  format, like '2.0K', '3.1G', '100B'. It was inspired in the -h option of
  Unix utilities like du, df and ls for "human-readable" output.


pkgId: cc321339858998af5c07fa8e9723b45e078c3879063ff109f32d6beebfaf39bd
name: perl-Number-Compare
arch: src
version: 0.03
epoch: 0
release: 27.fc33
summary: Perl module for numeric comparisons
url: https://metacpan.org/release/Number-Compare
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Compare-0.03-27.fc33.src.rpm
checksum_type: sha256
description:
  Number::Compare compiles a simple comparison to an anonymous subroutine,
  which you can call with a value to be tested again.


pkgId: db88202003551c757bc9dcfae8757640af0caa359d242ca09e67366336e38313
name: perl-Number-Format
arch: src
version: 1.75
epoch: 0
release: 15.fc33
summary: Perl extension for formatting numbers
url: https://metacpan.org/release/Number-Format
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Format-1.75-15.fc33.src.rpm
checksum_type: sha256
description:
  This module provides an easy means of formatting numbers in a manner
  suitable for displaying to the user.


pkgId: 3f485f52b27e14338263a024015ef0964a915aa524a940cf70423b7a9e1783cb
name: perl-Number-Fraction
arch: src
version: 2.01
epoch: 0
release: 9.fc33
summary: Perl extension to model fractions
url: https://metacpan.org/release/Number-Fraction
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Fraction-2.01-9.fc33.src.rpm
checksum_type: sha256
description:
  Number::Fraction allows you to work with fractions (i.e. rational numbers)
  in your Perl programs in a very natural way.


pkgId: adacbdde7d612576fc1bd49be273ec1eb4fc5e9eda839f5580a691da585fa669
name: perl-Number-Misc
arch: src
version: 1.2
epoch: 0
release: 15.fc33
summary: Handy utilities for numbers
url: https://metacpan.org/release/Number-Misc
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-39.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Misc-1.2-15.fc33.src.rpm
checksum_type: sha256
description:
  Number::Misc provides some miscellaneous handy utilities for handling
  numbers. These utilities handle processing numbers as strings, determining
  basic properties of numbers, or selecting a random number from a range.


pkgId: 597233ada1561efaca2d5faa8d7c14325eff37529e0fc14bd09d6e5ff67f4d4e
name: perl-Number-Range
arch: src
version: 0.12
epoch: 0
release: 13.fc33
summary: Extension to work with ranges of numbers
url: https://metacpan.org/release/Number-Range
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Range-0.12-13.fc33.src.rpm
checksum_type: sha256
description:
  Number::Range will take a description of a range, and then allow you to test on
  if a number falls within the range. You can also add and delete from the range.


pkgId: 87d4d0f0936c672d3955bd5f2ed252f4fba2474d25fd487eb341408a0baa3a8a
name: perl-Number-Tolerant
arch: src
version: 1.708
epoch: 0
release: 15.fc33
summary: Tolerance ranges for inexact numbers
url: https://metacpan.org/release/Number-Tolerant
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-Tolerant-1.708-15.fc33.src.rpm
checksum_type: sha256
description:
  These Perl modules create a number-like object whose value refers
  to a range of possible values, each equally acceptable. It overloads
  comparison operations to reflect this.


pkgId: 56b467486435f7fb752de6f200d7db4c9db6a0e91afadf392d0cab91c4d10995
name: perl-Number-WithError
arch: src
version: 1.01
epoch: 0
release: 21.fc33
summary: Numbers with error propagation and scientific rounding
url: https://metacpan.org/release/Number-WithError
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Number-WithError-1.01-21.fc33.src.rpm
checksum_type: sha256
description:
  This class is a container class for numbers with a number of associated
  symmetric and asymmetric errors. It overloads practically all common
  arithmetic operations and trigonometric functions to propagate the errors.
  It can do proper scientific rounding.

  You can use Math::BigFloat objects as the internal representation of numbers
  in order to support arbitrary precision calculations.

  Errors are propagated using Gaussian error propagation.


pkgId: 455c8c939cc262570634906ff46d19a9ede83e0f1ca89c1e1673cce9d307996b
name: perl-ORLite
arch: src
version: 1.98
epoch: 0
release: 23.fc33
summary: Extremely light weight SQLite-specific ORM
url: https://metacpan.org/release/ORLite
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ORLite-1.98-23.fc33.src.rpm
checksum_type: sha256
description:
  SQLite is a light weight single file SQL database that provides
  an excellent platform for embedded storage of structured data.
  However, while it is superficially similar to a regular server-side
  SQL database, SQLite has some significant attributes that make using
  it like a traditional database difficult. For example, SQLite is
  extremely fast to connect to compared to server databases
  (1000 connections per second is not unknown) and is particularly bad
  at concurrency, as it can only lock transactions at a database-wide level.
  This role as a super-fast internal data store can clash with the roles and
  designs of traditional object-relational modules like Class::DBI or
  DBIx::Class. What this situation would seem to need is an object-relation
  system that is designed specifically for SQLite and is aligned with its
  idiosyncrasies. ORLite is an object-relation system specifically
  for SQLite that follows many of the same principles as the ::Tiny
  series of modules and has a design that aligns directly to the capabilities
  of SQLite.


pkgId: 97ad3f443063416760405bd3779bec6ff67ca5babe20258f13854b5d308bbeeb
name: perl-ORLite-Migrate
arch: src
version: 1.10
epoch: 0
release: 25.fc33
summary: Light weight SQLite-specific schema migration
url: https://metacpan.org/release/ORLite-Migrate
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ORLite-Migrate-1.10-25.fc33.src.rpm
checksum_type: sha256
description:
  SQLite is a light weight single file SQL database that provides an excellent
  platform for embedded storage of structured data. ORLite is a light weight
  single class Object-Relational Mapper (ORM) system specifically designed
  for (and limited to only) work with SQLite. ORLite::Migrate is a light
  weight single class Database Schema Migration enhancement for ORLite.


pkgId: 3ad7074b7cb148a562d5c1a136bec7bf3641334abb53957483f860a20d83a62d
name: perl-ORLite-Mirror
arch: src
version: 1.24
epoch: 0
release: 23.fc33
summary: Extend ORLite to support remote SQLite databases
url: https://metacpan.org/release/ORLite-Mirror
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ORLite-Mirror-1.24-23.fc33.src.rpm
checksum_type: sha256
description:
  ORLite provides a read-only ORM API when it loads a read-only SQLite database
  from your local system. By combining this capability with LWP, ORLite::Mirror
  goes one step better and allows you to load a SQLite database from any
  arbitrary URI in read-only form as well.


pkgId: b9dbed62909f18c52e66f238907dcd6c2f5f553b18960865c610ce65b804401c
name: perl-ORLite-Statistics
arch: src
version: 0.03
epoch: 0
release: 28.fc33
summary: Statistics enhancement package for ORLite
url: https://metacpan.org/release/ORLite-Statistics
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ORLite-Statistics-0.03-28.fc33.src.rpm
checksum_type: sha256
description:
  This is an enhancement module for ORLite table classes, designed to provide
  easy integration with the Statistics::Base module.


pkgId: fb7782238b653ee9a715898c7417a7090b1b6af229e897b004015fbb56004314
name: perl-Object-Accessor
arch: src
version: 0.48
epoch: 1
release: 23.fc33
summary: Interface to create per object accessors
url: https://metacpan.org/release/Object-Accessor
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Accessor-0.48-23.fc33.src.rpm
checksum_type: sha256
description:
  Object::Accessor provides an interface to create per object accessors (as
  opposed to per Class accessors, as, for example, Class::Accessor provides).


pkgId: e9e4b9e9f7992faa0f11df2edd441e95895fcac92cb774fdda1b093ba0d69853
name: perl-Object-Deadly
arch: src
version: 0.09
epoch: 0
release: 36.fc33
summary: Perl module providing an object that dies whenever examined
url: https://metacpan.org/release/Object-Deadly
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Deadly-0.09-36.fc33.src.rpm
checksum_type: sha256
description:
  Object::Deadly is meant to be used in testing. All possible
  overloading and method calls die. You can pass this object into
  methods which are not supposed to accidentally trigger any potentially
  overloading.


pkgId: 0d1dad33ab8505bdeb6b1f948d49ea019c4d0bf01187788ea977977c7b5f4187
name: perl-Object-Event
arch: src
version: 1.23
epoch: 0
release: 25.fc33
summary: Class that provides an event callback interface
url: https://metacpan.org/release/Object-Event
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Event-1.23-25.fc33.src.rpm
checksum_type: sha256
description:
  This module was mainly written for Net::XMPP2, Net::IRC3, AnyEvent::HTTPD
  and BS to provide a consistent API for registering and emitting events.
  Even though I originally wrote it for those modules I released it
  separately in case anyone may find this module useful.


pkgId: 805c8aa2944e0b000f0d9ae56d238dc7ac558efb9fb9598bfc16bbfc1c3ea88e
name: perl-Object-HashBase
arch: src
version: 0.009
epoch: 0
release: 4.fc33
summary: Build hash-based classes
url: https://metacpan.org/release/Object-HashBase
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-HashBase-0.009-4.fc33.src.rpm
checksum_type: sha256
description:
  This package is used to generate classes based on hash references. Using this
  class will give you a new() method, as well as generating accessors you
  request.  Generated accessors will be getters, set_ACCESSOR setters will also
  be generated for you. You also get constants for each accessor (all caps)
  which return the key into the hash for that accessor. Single inheritance is
  also supported.


pkgId: 205e97512946766210d0d5310e918cd252c357c07c3ed4409dc40fbddaff9cd6
name: perl-Object-ID
arch: src
version: 0.1.2
epoch: 0
release: 21.fc33
summary: A unique identifier for any object
url: https://metacpan.org/release/Object-ID
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-ID-0.1.2-21.fc33.src.rpm
checksum_type: sha256
description:
  This is a unique identifier for any object, regardless of its type, structure
  or contents. Its features are:

   * Works on ANY object of any type
   * Does not modify the object in any way
   * Does not change with the object's contents
   * Is O(1) to calculate (i.e. doesn't matter how big the object is)
   * The id is unique for the life of the process
   * The id is always a true value


pkgId: f7f254fcf791939cd6fc53cb4063aa80fc8bde38e1854bb0ea670499ace7210b
name: perl-Object-InsideOut
arch: src
version: 4.05
epoch: 0
release: 9.fc33
summary: Comprehensive inside-out object support module
url: https://metacpan.org/release/Object-InsideOut
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-InsideOut-4.05-9.fc33.src.rpm
checksum_type: sha256
description:
  This module provides comprehensive support for implementing classes using the
  inside-out object model.

  This module implements inside-out objects as anonymous scalar references that
  are blessed into a class with the scalar containing the ID for the object
  (usually a sequence number). Object data (i.e., fields) are stored within the
  class's package in either arrays indexed by the object's ID, or hashes keyed
  to the object's ID.


pkgId: 38f80298d363c0250e04643d583497912e22fd7f0f90a055910c2e4e618a00bb
name: perl-Object-MultiType
arch: src
version: 0.05
epoch: 0
release: 37.fc33
summary: Perl Objects as Hash, Array, Scalar, Code and Glob at the same time
url: https://metacpan.org/release/Object-MultiType
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-MultiType-0.05-37.fc33.src.rpm
checksum_type: sha256
description:
  This module return an object that works like a Hash, Array, Scalar, Code
  and Glob object at the same time.


pkgId: b91b764d6aca30cf934edc84e7319f255bc3b7dbfa4124995f025457bafef311
name: perl-Object-Pad
arch: src
version: 0.31
epoch: 0
release: 2.fc33
summary: Simple syntax for lexical slot-based objects
url: https://metacpan.org/release/Object-Pad
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Pad-0.31-2.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides a simple syntax for creating object classes, which
  uses private variables that look like lexical variables for object member
  fields.


pkgId: 0ce1f7ba3cd29f9e7ac8e32c88fc0e2e20e51ab7bf23e567f6352b122d718db8
name: perl-Object-Pluggable
arch: src
version: 1.29
epoch: 0
release: 28.fc33
summary: Base class for creating plugin-enabled objects
url: https://metacpan.org/release/Object-Pluggable
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-39.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Pluggable-1.29-28.fc33.src.rpm
checksum_type: sha256
description:
  Object::Pluggable is a base class for creating plug-in enabled objects. It
  is a generic port of POE::Component::IRC's plugin system.


pkgId: b592395ab91af919a01ce18bae46b5dc23ea634e9b32e4a2ac130cae15ea2c2d
name: perl-Object-Realize-Later
arch: src
version: 0.21
epoch: 0
release: 10.fc33
summary: Delayed creation of objects
url: https://metacpan.org/release/Object-Realize-Later
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Realize-Later-0.21-10.fc33.src.rpm
checksum_type: sha256
description:
  This module helps you implementing delay loading of object-data.  While
  creating a stub-object, Object::Realize::Later simulates you got the
  real data.


pkgId: cb99f57b5b8c6a8a5149b1eb3b820900306e19722ab6e003d39b9f4ef39197e4
name: perl-Object-Remote
arch: src
version: 0.004001
epoch: 0
release: 4.fc33
summary: Call methods on objects in other processes or on other hosts
url: https://metacpan.org/release/Object-Remote
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Remote-0.004001-4.fc33.src.rpm
checksum_type: sha256
description:
  Object::Remote allows you to create an object in another process - usually
  one running on another machine you can connect to via ssh, although there
  are other connection mechanisms available.


pkgId: 2c5334ad26fba80385e72114f242eb4d7159680d04e2e1a521206828f607ce47
name: perl-Object-Signature
arch: src
version: 1.08
epoch: 0
release: 7.fc33
summary: Cryptographically strong objects
url: https://metacpan.org/release/Object-Signature
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Signature-1.08-7.fc33.src.rpm
checksum_type: sha256
description:
  Object::Signature is an abstract base class that you can inherit from in
  order to allow your objects to generate unique cryptographic signatures.


pkgId: 59428e0794f929caaa46bb6fbdb37087a95839a19f64dc3916b0a024441e4b5e
name: perl-Object-Tiny
arch: src
version: 1.09
epoch: 0
release: 7.fc33
summary: Class building as simple as it gets
url: https://metacpan.org/release/Object-Tiny
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Object-Tiny-1.09-7.fc33.src.rpm
checksum_type: sha256
description:
  To use Object::Tiny, just call it with a list of accessors to be created.
  This will create a basic "new" constructor and a bunch of simple accessors,
  and set the inheritance to be the child of Object::Tiny.


pkgId: c2b3317b8f29489b30d88a45f75c3f78fe47556c05611e14ad950fff095e509a
name: perl-Olson-Abbreviations
arch: src
version: 0.04
epoch: 0
release: 22.fc33
summary: Globally unique timezones abbreviation handling
url: https://metacpan.org/release/Olson-Abbreviations
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Olson-Abbreviations-0.04-22.fc33.src.rpm
checksum_type: sha256
description:
  This module should help you with converting commonly used and often
  ambigious olson abbreviations into TZ offset notation.


pkgId: c118383325ff269433cc00311eeb77b0bbef2b95d13f8c3f90c5d5cf661f2d7a
name: perl-OpenFrame
arch: src
version: 3.05
epoch: 0
release: 42.fc33
summary: Framework for network enabled applications
url: https://metacpan.org/release/OpenFrame
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-OpenFrame-3.05-42.fc33.src.rpm
checksum_type: sha256
description:
  OpenFrame is a framework for network services serving to multiple media
  channels - for instance, the web, WAP, and digital television. It is built
  around the Pipeline API, and provides extra abstraction to make delivery of
  a single application to multiple channels easier.


pkgId: 32abcfd58af750bee34ac562faa30b67dbc9c45e243c7c13f25ce7dd50f45dd2
name: perl-OpenGL
arch: src
version: 0.7000
epoch: 0
release: 15.fc33
summary: Perl OpenGL bindings
url: http://sourceforge.net/projects/pogl/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-OpenGL-0.7000-15.fc33.src.rpm
checksum_type: sha256
description:
  Perl bindings to implementations of OpenGL and GLUT, providing virtually all
  of the OpenGL 1.0, and 1.1 functions, and most of 1.2.


pkgId: 04f30b72a8704dde5f848c47c7cacf8876cb9b78d622273647b317fbd9ffda42
name: perl-Ouch
arch: src
version: 0.0501
epoch: 0
release: 7.fc33
summary: Exceptions that don't hurt
url: https://metacpan.org/release/Ouch
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Ouch-0.0501-7.fc33.src.rpm
checksum_type: sha256
description:
  Ouch provides a class for exception handling that doesn't require a
  lot of boilerplate, nor any up front definition. If Exception::Class
  is working for you, great! But if you want something that is faster,
  easier to use, requires less typing, and has no prerequisites, but still
  gives you much of that same functionality, then Ouch is for you.


pkgId: bd5a0cc94ac3592316558e87f5e82f08ec52d2fd2cd5fccfdd6d8788c9de2754
name: perl-PAR
arch: src
version: 1.016
epoch: 0
release: 7.fc33
summary: Perl Archive Toolkit
url: https://metacpan.org/release/PAR
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PAR-1.016-7.fc33.src.rpm
checksum_type: sha256
description:
  This module lets you use special zip files, called Perl Archives, as
  libraries from which Perl modules can be loaded.


pkgId: abdff026038f2435805760712b2196356f0dac9f7669532ab9bf971cbe2f9ae4
name: perl-PAR-Dist
arch: src
version: 0.49
epoch: 0
release: 23.fc33
summary: Toolkit for creating and manipulating Perl PAR distributions
url: https://metacpan.org/release/PAR-Dist
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PAR-Dist-0.49-23.fc33.src.rpm
checksum_type: sha256
description:
  This module creates and manipulates PAR distributions. They are architecture-
  specific PAR files, containing everything under blib/ of CPAN distributions
  after their make or Build stage, a META.yml describing metadata of the
  original CPAN distribution, and a MANIFEST detailing all files within it.
  Digitally signed PAR distributions will also contain a SIGNATURE file.


pkgId: 7d63c344768eb7c080e0c73f0027ea2cc0dd2afffc7bb3992375b2a13f0abd86
name: perl-PAR-Packer
arch: src
version: 1.050
epoch: 0
release: 4.fc33
summary: PAR Packager
url: https://metacpan.org/release/PAR-Packer
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PAR-Packer-1.050-4.fc33.src.rpm
checksum_type: sha256
description:
  This module implements the App::Packer::Backend interface, for generating
  stand-alone executables, perl scripts and PAR files.


pkgId: ea5d550773c116b5304e52ca9014f27440f316600657993cfe2880d1615b3196
name: perl-PDF-API2
arch: src
version: 2.037
epoch: 0
release: 3.fc33
summary: Perl module for creation and modification of PDF files
url: https://metacpan.org/release/PDF-API2
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PDF-API2-2.037-3.fc33.src.rpm
checksum_type: sha256
description:
  A Perl Module Chain to facilitate the Creation and Modification of High-Quality
  "Portable Document Format (aka. PDF)" Files.


pkgId: e9af75b3b3c4a40b90e4d8a246f8ebc2dbcc7de5147e6cf7631ba22511481e24
name: perl-PDF-Create
arch: src
version: 1.46
epoch: 0
release: 4.fc33
summary: Create PDF files
url: https://metacpan.org/release/PDF-Create
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-39.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PDF-Create-1.46-4.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to create PDF documents using a large number of
  primitives, and emit the result as a PDF file or stream. PDF stands for
  Portable Document Format.

  Documents can have several pages, a table of content, an information section
  and many other PDF elements. More functionalities will be added as needs arise.

  Documents are constructed on the fly so the memory footprint is not tied to the
  size of the pages but only to their number.


pkgId: 72e1ef41981bafcc583e0144a45c7fc90c5c5f3a29e512843e4c005a9a659cb4
name: perl-PDF-Haru
arch: src
version: 1.00
epoch: 0
release: 32.fc33
summary: Perl interface to Haru Free PDF Library
url: https://metacpan.org/release/PDF-Haru
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PDF-Haru-1.00-32.fc33.src.rpm
checksum_type: sha256
description:
  Perl interface to Haru Free PDF Library. It supports the following features:

     1. Generating PDF files with lines, text, images.
     2. Outline, text annotation, link annotation.
     3. Compressing document with deflate-decode.
     4. Embedding PNG, Jpeg images.
     5. Embedding Type1 font and TrueType font.
     6. Creating encrypted PDF files.
     7. Using various character sets (ISO8859-1~16, MSCP1250~8, KOI8-R).
     8. Supporting CJK fonts and encodings.


pkgId: 74413f4c98cae651523d6131ac37c2f034f484a1e382b73795b30129bac89cfb
name: perl-PDF-Reuse
arch: src
version: 0.39
epoch: 0
release: 13.fc33
summary: Reuse and mass produce PDF documents
url: https://metacpan.org/release/PDF-Reuse
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PDF-Reuse-0.39-13.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to reuse PDF-files. You can use pages, images,
  fonts and Acrobat JavaScript from old PDF-files (if they were not
  encrypted), and rearrange the components, and add new graphics, texts etc.

  There is also support for graphics. In the tutorial there is a description of
  how to transform simple PDF-pages to graphic Perl objects with the help of
  programs based on this module.

  The module is fairly fast, so it should be possible to use it for mass
  production.


pkgId: a5ddbe341d669d7be6b5314f0fa4f2eaab16365d240bd1abe876af877dd950f6
name: perl-PDL
arch: src
version: 2.21.0
epoch: 0
release: 6.fc33
summary: The Perl Data Language
url: http://pdl.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PDL-2.21.0-6.fc33.src.rpm
checksum_type: sha256
description:
  PDL ("Perl Data Language") gives standard Perl the ability to
  compactly store and speedily manipulate the large N-dimensional data
  arrays which are the bread and butter of scientific computing.  PDL
  turns perl into a free, array-oriented, numerical language similar to
  such commercial packages as IDL and MatLab.


pkgId: 8666df3163c9d4e9b7aab4eed7b166bac95525fd6a8bc769705b5461bd11103d
name: perl-PFT
arch: src
version: 1.4.1
epoch: 0
release: 4.fc33
summary: Hacker friendly static blog generator, core library
url: https://github.com/dacav/PFT
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PFT-1.4.1-4.fc33.src.rpm
checksum_type: sha256
description:
  PFT stands for *Plain F. Text*, where the meaning of *F.* is up to
  personal interpretation. Like *Fancy* or *Fantastic*.

  It is yet another static website generator. This means your content is
  compiled once and the result can be served by a simple HTTP server,
  without need of server-side dynamic content generation.

  This package provides the core library which abstracts away the file-system
  access.


pkgId: 4fa588fd2be67d8672f9ba0f63acdd2674a693c19b34085b47b8a4b1feb1def8
name: perl-PHP-Serialization
arch: src
version: 0.34
epoch: 0
release: 28.fc33
summary: Converts between PHP's serialize() output and the equivalent Perl structure
url: https://metacpan.org/release/PHP-Serialization
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PHP-Serialization-0.34-28.fc33.src.rpm
checksum_type: sha256
description:
  Provides a simple, quick means of serializing perl memory structures
  (including object data!) into a format that PHP can deserialize() and
  access, and vice versa.


pkgId: 7ad079eb7ed0ae157ba8963341d6752431e997837895069c3877fced8f7a08eb
name: perl-POD2-Base
arch: src
version: 0.043
epoch: 0
release: 28.fc33
summary: Base module for translations of Perl documentation
url: https://metacpan.org/release/POD2-Base
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POD2-Base-0.043-28.fc33.src.rpm
checksum_type: sha256
description:
  This module is an abstraction of the code in POD2::IT and POD2::FR. These
  modules belong to the Italian and the French translation projects of core
  Perl pods.


pkgId: 0b4112403818230519bb99f6e9068cf0e335e7d81a881549a369fb10b6564f1b
name: perl-POE
arch: src
version: 1.368
epoch: 0
release: 4.fc33
summary: Portable multitasking and networking framework for event loops
url: https://metacpan.org/release/POE
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-1.368-4.fc33.src.rpm
checksum_type: sha256
description:
  POE is a framework for cooperative, event driven multitasking in Perl. It
  provides a unified interface for several event loops, including select(),
  IO::Poll, Glib, Gtk, Tk, Wx, and Gtk2. Many of these event loop interfaces
  were written by others, with the help of POE::Test::Loops.


pkgId: 5c5e3777a97081c4c467239bd399a888abe9937333fe6782779b34101295eab3
name: perl-POE-Component-Child
arch: src
version: 1.39
epoch: 0
release: 37.fc33
summary: Child management component for POE
url: https://metacpan.org/release/POE-Component-Child
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Child-1.39-37.fc33.src.rpm
checksum_type: sha256
description:
  This POE component serves as a wrapper for POE::Wheel::Run, obviating
  the need to create a session to receive the events it dishes out.


pkgId: ce3d9a820405a7a748021f495a9da254b7f80326e2314e33bc6d63621fbdfe6c
name: perl-POE-Component-Client-DNS
arch: src
version: 1.054
epoch: 0
release: 15.fc33
summary: Non-blocking/concurrent DNS queries using Net::DNS and POE
url: https://metacpan.org/release/POE-Component-Client-DNS
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-DNS-1.054-15.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::DNS provides a facility for non-blocking, concurrent
  DNS requests. Using POE, it allows other tasks to run while waiting for name
  servers to respond.


pkgId: 6fe410d8516ddf5d58741db5456c1ce2c9dba6f740dc03ce5cb2df94beeac2d6
name: perl-POE-Component-Client-HTTP
arch: src
version: 0.949
epoch: 0
release: 18.fc33
summary: A non-blocking/parallel web requests engine for POE
url: https://metacpan.org/release/POE-Component-Client-HTTP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-HTTP-0.949-18.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::HTTP is an HTTP user-agent for POE. It lets other
  sessions run while HTTP transactions are being processed, and it lets several
  HTTP transactions be processed in parallel.


pkgId: 90f2f1fa4475f914ee17eda55339f81a219fef21391ee22a8fcb2f400a8767fe
name: perl-POE-Component-Client-Ident
arch: src
version: 1.16
epoch: 0
release: 23.fc33
summary: A component that provides non-blocking Ident lookups to your sessions
url: https://metacpan.org/release/POE-Component-Client-Ident
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-Ident-1.16-23.fc33.src.rpm
checksum_type: sha256
description:
  This package ships with three ident modules:

  POE::Component::Client::Ident is a POE component that provides
  non-blocking Ident lookup services to other components
  and sessions. The Ident protocol is described in RFC 1413
  <http://www.faqs.org/rfcs/rfc1413.html>.

  POE::Component::Client::Ident::Agent is a POE component that provides
  a single "one shot" lookup of a user name on the remote side of a TCP
  connection to other components and sessions, using the ident (auth/tap)
  protocol.

  POE::Filter::Ident takes lines of raw Ident input and turns
  them into weird little data structures, suitable for feeding to
  POE::Component::Client::Ident::Agent.


pkgId: 78e4ce54d3ebf022b6a750c012b0107cdeb048e49ea54414855c3a4b509ab093
name: perl-POE-Component-Client-Keepalive
arch: src
version: 0.2720
epoch: 0
release: 19.fc33
summary: Manages and keeps alive client connections
url: https://metacpan.org/release/POE-Component-Client-Keepalive
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-Keepalive-0.2720-19.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::Keepalive creates and manages connections for other
  components. It maintains a cache of kept-alive connections for quick reuse. It
  is written specifically for clients that can benefit from kept-alive
  connections, such as HTTP clients. Using it for one-shot connections would
  probably be silly.


pkgId: 14d0fbcbbaf06e81af87d03eaf60f03dad259eca4d4f0f3f1ca94152ecdf5920
name: perl-POE-Component-Client-LDAP
arch: src
version: 0.04
epoch: 0
release: 37.fc33
summary: Async LDAP access for POE
url: https://metacpan.org/release/POE-Component-Client-LDAP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-LDAP-0.04-37.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::LDAP->new() starts up a new POE::Session and
  POE::Wheel to manage socket communications for an underlying Net::LDAP
  object, allowing it to be used in async mode properly within a POE program.


pkgId: 816b1186218f901516ac19d9297f8d1d2824269b555cefd979e47ad2e0eba74e
name: perl-POE-Component-Client-Ping
arch: src
version: 1.175
epoch: 0
release: 10.fc33
summary: Non-blocking ICMP ping client
url: https://metacpan.org/release/POE-Component-Client-Ping
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-Ping-1.175-10.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::Ping is non-blocking ICMP ping client. It lets
  several other sessions ping through it in parallel, and it lets them
  continue doing other things while they wait for responses.


pkgId: a24d283500f22b64f4cf43e54ec04b899898af68986b5044c9f08b83ca1926b4
name: perl-POE-Component-Client-SMTP
arch: src
version: 0.22
epoch: 0
release: 31.fc33
summary: Asynchronous mail sending with POE
url: https://metacpan.org/release/POE-Component-Client-SMTP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Client-SMTP-0.22-31.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Client::SMTP allows you to send email messages
  in an asynchronous manner, using POE.


pkgId: fc8cb3b1de7b533a109d28fa16d56c2ab9d3228eee86d47efa03021772d037b6
name: perl-POE-Component-DBIAgent
arch: src
version: 0.26
epoch: 0
release: 35.fc33
summary: POE Component for running asynchronous DBI calls
url: https://metacpan.org/release/POE-Component-DBIAgent
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-DBIAgent-0.26-35.fc33.src.rpm
checksum_type: sha256
description:
  DBIAgent is your answer to non-blocking DBI in POE.

  DBIAgent forks off a configurable number of helper processes for
  running DBI queries.  The states that depend on the output of the
  queries only get called when there is data for them to process.  No
  more agonizing about query optimization in terms of milliseconds
  because the rest of your program will suffer.  Leave that to the
  operating system!  POE is designed for doing a lot of things
  concurrently.  Waiting isn't doing, it's waiting... :-)


pkgId: 3d5d8285ac53f19ed4d9d95cb5fb050e76de4fb6fe276bb3148910c2c2d1ddc4
name: perl-POE-Component-IRC
arch: src
version: 6.90
epoch: 0
release: 10.fc33
summary: A POE component for building IRC clients
url: https://metacpan.org/release/POE-Component-IRC
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-IRC-6.90-10.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::IRC is a POE component (who'd have guessed?) which acts as an
  easily controllable IRC client for your other POE components and sessions. You
  create an IRC component and tell it what events your session cares about and
  where to connect to, and it sends back interesting IRC events when they
  happen. You make the client do things by sending it events. That's all there
  is to it. Cool, no?


pkgId: 736f87a5115e7a1797efe60ed4ce3a49117ff969ea7b675f4931d7cfa9c8ae4d
name: perl-POE-Component-JobQueue
arch: src
version: 0.571
epoch: 0
release: 24.fc33
summary: Process a large number of tasks with a finite number of workers
url: https://metacpan.org/release/POE-Component-JobQueue
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-JobQueue-0.571-24.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::JobQueue manages a finite pool of worker sessions as
  they handle an arbitrarily large number of tasks.  It often is used as
  a form of flow control, preventing an arbitrarily large number of
  worker sessions from exhausting some finite resource.


pkgId: c2625288c25ce06b282b04c7b6db8d7279910f3c8acd7f1d85c846875ebe8bc3
name: perl-POE-Component-Logger
arch: src
version: 1.10
epoch: 0
release: 26.fc33
summary: A POE logging class
url: https://metacpan.org/release/POE-Component-Logger
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Logger-1.10-26.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Logger provides a simple logging component that uses
  Log::Dispatch::Config to drive it, allowing you to log to multiple places at
  once (e.g. to STDERR and Syslog at the same time) and also to flexibly define
  your logger's output.

  It is very simple to use, because it creates a Logger::log method (yes, this
  is namespace corruption, so shoot me). If you don't like this, feel free to
  post directly to your logger as follows:

    $kernel->post('logger', 'log', "An error occurred: $!");

  All logging is done in the background, so don't expect immediate output -
  the output will only occur after control goes back to the kernel so it can
  process the next event.


pkgId: 7066df38e572055e6dbbd85f2188b0f7e58d2712754f0109e66b6c29de67527c
name: perl-POE-Component-Pluggable
arch: src
version: 1.28
epoch: 0
release: 12.fc33
summary: A base class for creating plugin-enabled POE components
url: https://metacpan.org/release/POE-Component-Pluggable
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Pluggable-1.28-12.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Pluggable is a base class for creating plugin enabled
  POE Components. It is a generic port of POE::Component::IRC's plugin
  system. If your component dispatches events to registered POE sessions,
  then POE::Component::Pluggable may be a good fit for you.


pkgId: b123d4c06291dc3a020a25c4d6e507a72f3e63dae4b8802d6a3bab56ea65a6e6
name: perl-POE-Component-Resolver
arch: src
version: 0.921
epoch: 0
release: 19.fc33
summary: Non-blocking getaddrinfo() resolver
url: https://metacpan.org/release/POE-Component-Resolver
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Resolver-0.921-19.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Resolver performs Socket::GetAddrInfo::getaddrinfo() calls
  in subprocesses where they're permitted to block as long as necessary.


pkgId: 2cf16bbefe064aedd976caf290a44b2533e805f5baeb67477acc5cb25932edbc
name: perl-POE-Component-SNMP
arch: src
version: 1.1006
epoch: 0
release: 28.fc33
summary: POE interface to Net::SNMP
url: https://metacpan.org/release/POE-Component-SNMP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-SNMP-1.1006-28.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::SNMP is a POE-ized wrapper around the the Net::SNMP module.
  Most of its arguments aren't even evaluated by POE, except for -alias and
  -callback_args, as described in the manpage.

  If you want to make non-blocking calls with Net::SNMP in a POE application,
  this is the module to do it with.


pkgId: ff8f414f92fe06742640ca9a15f62f583c9424586af560ed7ed488d0d2dd5222
name: perl-POE-Component-Server-Bayeux
arch: src
version: 0.04
epoch: 0
release: 29.fc33
summary: Bayeux/cometd server implementation in POE
url: https://metacpan.org/release/POE-Component-Server-Bayeux
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Server-Bayeux-0.04-29.fc33.src.rpm
checksum_type: sha256
description:
  This module implements the Bayeux Protocol (1.0draft1) from the Dojo
  Foundation. Also called cometd, Bayeux is a low-latency routing protocol
  for JSON encoded events between clients and servers in a publish-
  subscribe model.


pkgId: 23bb76ca125ec0dfc9d6fd150c02d94d0ffdb5a89d01a786d5900c15cfa2a6d9
name: perl-POE-Component-Server-HTTP
arch: src
version: 0.09
epoch: 0
release: 36.fc33
summary: Foundation of a POE HTTP Daemon
url: https://metacpan.org/release/POE-Component-Server-HTTP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Server-HTTP-0.09-36.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Server::HTTP (PoCo::HTTPD) is a framework for building
  custom HTTP servers based on POE. It is loosely modeled on the ideas of
  apache and the mod_perl/Apache module.


pkgId: 9a0bb300f381b10577bb9c3621d28a9fc0b51629a3ed9e25ab4183fbd7a388cc
name: perl-POE-Component-Server-XMLRPC
arch: src
version: 0.05
epoch: 0
release: 37.fc33
summary: Publish POE event handlers via XMLRPC over HTTP
url: https://metacpan.org/release/POE-Component-Server-XMLRPC
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Server-XMLRPC-0.05-37.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Server::XMLRPC is a bolt-on component that can publish a
  event handlers via XMLRPC over HTTP.


pkgId: ac02df6567a005188d3d56d3f7c06d1233377c35004b1db17b016231166b89f3
name: perl-POE-Component-SimpleDBI
arch: src
version: 1.31
epoch: 0
release: 18.fc33
summary: Asynchronous non-blocking DBI calls in POE made simple
url: https://metacpan.org/release/POE-Component-SimpleDBI
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-SimpleDBI-1.31-18.fc33.src.rpm
checksum_type: sha256
description:
  This module works its magic by creating a new session with POE, then
  spawning off a child process to do the "heavy" lifting. That way, your
  main POE process can continue servicing other clients. Queries are put
  into a queue, and processed one at a time.


pkgId: 47c35392a31fa2b04bc3604f85afcf291a20abaf1d2acfbb1776463295d253d7
name: perl-POE-Component-SimpleLog
arch: src
version: 1.05
epoch: 0
release: 32.fc33
summary: A simple logging system for POE
url: https://metacpan.org/release/POE-Component-SimpleLog
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-SimpleLog-1.05-32.fc33.src.rpm
checksum_type: sha256
description:
  This module is a vastly simplified logging system that can do nice stuff.
  Think of this module as a dispatcher for various logs.

  This module *DOES NOT* do anything significant with logs, it simply routes
  them to the appropriate place ( Events )

  You register a log that you are interested in, by telling SimpleLog the target
  session and target event. Once that is done, any log messages your program
  generates ( sent to SimpleLog of course ) will be massaged, then sent to the
  target session / target event for processing.

  This enables an interesting logging system that can be changed during runtime
  and allow pluggable interpretation of messages.


pkgId: bf61d0fac9c13f61b5810b9df97ae6feaf29f27a7af18797e7d8634306cdf057
name: perl-POE-Component-Syndicator
arch: src
version: 0.06
epoch: 0
release: 25.fc33
summary: POE component base class which implements the Observer pattern
url: https://metacpan.org/release/POE-Component-Syndicator
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Component-Syndicator-0.06-25.fc33.src.rpm
checksum_type: sha256
description:
  POE::Component::Syndicator is a base class for POE components which need to
  handle a persistent resource (e.g. a connection to an IRC server) for one
  or more sessions in an extendable way.


pkgId: 88a83c72da50b5987a61181847335521d99c04ca7eda19687ec074ed750806dc
name: perl-POE-Filter-Transparent-SMTP
arch: src
version: 0.2
epoch: 0
release: 36.fc33
summary: A POE filter for SMTP
url: https://metacpan.org/release/POE-Filter-Transparent-SMTP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Filter-Transparent-SMTP-0.2-36.fc33.src.rpm
checksum_type: sha256
description:
  POE data filter which aims to make SMTP data transparent
  just before going onto the wire as per RFC 821 Section 4.5.2.


pkgId: 5208182b2023142061c1d91460a9700f234a25a3e0fb61a5038dcbc258a01fbe
name: perl-POE-Filter-Zlib
arch: src
version: 2.04
epoch: 0
release: 12.fc33
summary: POE filter wrapped around Compress::Zlib
url: https://metacpan.org/release/POE-Filter-Zlib
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Filter-Zlib-2.04-12.fc33.src.rpm
checksum_type: sha256
description:
  POE::Filter::Zlib provides a POE filter for performing compression and
  uncompression using Compress::Zlib. It is suitable for use with
  POE::Filter::Stackable.


pkgId: 9a92770781cdd0cbb9845964493d127402c47a35c80e96348a235642c4134c64
name: perl-POE-Loop-Event
arch: src
version: 1.305
epoch: 0
release: 15.fc33
summary: Bridge that allows POE to be driven by Event.pm
url: https://metacpan.org/release/POE-Loop-Event
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Loop-Event-1.305-15.fc33.src.rpm
checksum_type: sha256
description:
  POE::Loop::Event implements the interface documented in POE::Loop.
  Therefore it has no documentation of its own. Please see POE::Loop for
  more details.


pkgId: 7fd73f2a15fc71c0a0320a9d29b52a0f634ddc26a1c864f182a9a87d210c515f
name: perl-POE-Test-Loops
arch: src
version: 1.360
epoch: 0
release: 18.fc33
summary: Reusable tests for POE::Loop authors
url: https://metacpan.org/release/POE-Test-Loops
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Test-Loops-1.360-18.fc33.src.rpm
checksum_type: sha256
description:
  POE::Test::Loops contains one function, generate(), which will generate all
  the loop tests for one or more POE::Loop subclasses.  The poe-gen-tests manual
  page also documents the POE::Test::Loops system in more detail.


pkgId: 2209f7f355150da63de2131c4022b83ad7f4a9f67dab090952c0c7026f109e71
name: perl-POE-Wheel-Null
arch: src
version: 0.01
epoch: 0
release: 35.fc33
summary: POE Wheel that does puts data nowhere, and sends nothing
url: https://metacpan.org/release/POE-Wheel-Null
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-Wheel-Null-0.01-35.fc33.src.rpm
checksum_type: sha256
description:
  POE::Wheel::Null creates a wheel which doesn't do anything upon put(), and
  doesn't send any events to the current session.

  Its function is the same as those pipes in the Enterprise's engine room
  marked "GNDN".


pkgId: b3be46af4fc7b4c51e510c55375c68e036a3cf8423f2beee4380c292c5847ab7
name: perl-POE-XS-Queue-Array
arch: src
version: 0.006
epoch: 0
release: 19.fc33
summary: XS implementation of POE::Queue::Array
url: https://metacpan.org/release/POE-XS-Queue-Array
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POE-XS-Queue-Array-0.006-19.fc33.src.rpm
checksum_type: sha256
description:
  This class is an implementation of the abstract POE::Queue interface. It
  implements a priority queue using C, with an XS interface supplied.


pkgId: b17ab0aa66d5dc50851ae2df8d1dfd3722390be6da9734797df088d16fa8b4a3
name: perl-POSIX-2008
arch: src
version: 0.16
epoch: 0
release: 7.fc33
summary: Perl interface to POSIX.1-2008
url: https://metacpan.org/release/POSIX-2008
rpm_license: (GPL+ or Artistic) and WTFPL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POSIX-2008-0.16-7.fc33.src.rpm
checksum_type: sha256
description:
  POSIX::2008 Perl module contains many of the interfaces specified by
  POSIX.1-2008 that the core POSIX Perl module withholds or implements
  differently.


pkgId: 379131852281c53d363c1fccd1eb20df75d21766c1b05ca7db850c6ec0efbd20
name: perl-POSIX-AtFork
arch: src
version: 0.04
epoch: 0
release: 4.fc33
summary: Hook registrations at fork(2)
url: https://metacpan.org/release/POSIX-AtFork
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POSIX-AtFork-0.04-4.fc33.src.rpm
checksum_type: sha256
description:
  This module is an interface to pthread_atfork(3), which registers handlers
  called before and after fork(2).


pkgId: afdc7498adbdca3bb2b2879e4e3b85be05414d43533568d590e69111519e6573
name: perl-POSIX-strftime-Compiler
arch: src
version: 0.44
epoch: 0
release: 1.fc33
summary: GNU C library compatible strftime for loggers and servers
url: https://metacpan.org/release/POSIX-strftime-Compiler
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-s390x-23.s390.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-POSIX-strftime-Compiler-0.44-1.fc33.src.rpm
checksum_type: sha256
description:
  POSIX::strftime::Compiler provides GNU C library compatible strftime(3).
  But this module will not affected by the system locale. This feature is
  useful when you want to write loggers, servers and portable applications.


pkgId: 358bbf60ce0ca8cc1fdd9f2f832d06452fb65476f5dc759f866ab817d03df786
name: perl-PPI-PowerToys
arch: src
version: 0.14
epoch: 0
release: 31.fc33
summary: Handy collection of small PPI-based utilities
url: https://metacpan.org/release/PPI-PowerToys
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPI-PowerToys-0.14-31.fc33.src.rpm
checksum_type: sha256
description:
  The PPI PowerToys are a small collection of utilities for working with Perl
  files, modules and distributions.


pkgId: 904dee80b73d807bff24fa4cbbe2f0c361f1b0341940ac1e975c91a217437c76
name: perl-PPI-Tester
arch: src
version: 0.15
epoch: 0
release: 20.fc33
summary: A wxPerl-based interactive PPI debugger/tester
url: https://metacpan.org/release/PPI-Tester
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPI-Tester-0.15-20.fc33.src.rpm
checksum_type: sha256
description:
  This package implements a wxWindows desktop application which provides
  the ability to interactively test the PPI perl parser.


pkgId: 579366e3cd3832f7a96ee0a27881fe05330986f7007fb330e486ca9b13e4861c
name: perl-PPI-XS
arch: src
version: 0.910
epoch: 0
release: 11.fc33
summary: XS acceleration for PPI
url: https://metacpan.org/release/PPI-XS
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPI-XS-0.910-11.fc33.src.rpm
checksum_type: sha256
description:
  PPI::XS provides XS-based acceleration of the core PPI packages. It
  selectively replaces a (small but growing) number of methods throughout PPI
  with identical but much faster C versions.


pkgId: 7580a855860a69d1353d2fd0e9ac1bcca674f72a7aef41a6552172bb375612b8
name: perl-PPIx-EditorTools
arch: src
version: 0.21
epoch: 0
release: 11.fc33
summary: Utility methods and base class for manipulating Perl via PPI
url: https://metacpan.org/release/PPIx-EditorTools
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPIx-EditorTools-0.21-11.fc33.src.rpm
checksum_type: sha256
description:
  Base class and utility methods for manipulating Perl via PPI. Pulled out
  from the Padre::Task::PPI code.


pkgId: 7fb149cd7e162deaf2618885bff135e8c93f58c7edd7a3d4f28b4ca75eb9f243
name: perl-PPIx-QuoteLike
arch: src
version: 0.012
epoch: 0
release: 1.fc33
summary: Parse Perl string literals and string-literal-like things
url: https://metacpan.org/release/PPIx-QuoteLike
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPIx-QuoteLike-0.012-1.fc33.src.rpm
checksum_type: sha256
description:
  This Perl class parses Perl string literals and things that are reasonably
  like string literals. Its real reason for being is to find interpolated
  variables for Perl::Critic policies and similar code.


pkgId: 5052c80734b13d2dfc2d310d25968f076302031923aed9e695d4a1cbc3dded27
name: perl-PPIx-Regexp
arch: src
version: 0.073
epoch: 0
release: 1.fc33
summary: Represent a regular expression of some sort
url: https://metacpan.org/release/PPIx-Regexp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPIx-Regexp-0.073-1.fc33.src.rpm
checksum_type: sha256
description:
  The purpose of the PPIx-Regexp package is to parse regular expressions in a
  manner similar to the way the PPI package parses Perl. This class forms the
  root of the parse tree, playing a role similar to PPI::Document.


pkgId: 0d11348a193c03eb9b829d7cf29b305e9e32326d47110f74366ca5e4ea69c20e
name: perl-PPIx-Utilities
arch: src
version: 1.001000
epoch: 0
release: 39.fc33
summary: Extensions to PPI
url: https://metacpan.org/release/PPIx-Utilities
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-36.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PPIx-Utilities-1.001000-39.fc33.src.rpm
checksum_type: sha256
description:
  This is a collection of functions for dealing with PPI objects, many of
  which originated in Perl::Critic. They are organized into modules by the
  kind of PPI class they relate to, by replacing the "PPI" at the front of
  the module name with "PPIx::Utilities", e.g. functionality related to
  PPI::Nodes is in PPIx::Utilities::Node.


pkgId: 85302b0c9a25bc93074383da5639e9042901c1fdf377492d23f2efe3fb4a3fb4
name: perl-PSGI
arch: src
version: 1.102
epoch: 0
release: 21.fc33
summary: Perl Web Server Gateway Interface Specification
url: https://metacpan.org/release/PSGI
rpm_license: CC-BY-SA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PSGI-1.102-21.fc33.src.rpm
checksum_type: sha256
description:
  This document specifies a standard interface between web servers and Perl web
  applications or frameworks, to promote web application portability and reduce
  the duplicated efforts by web application framework developers.


pkgId: 50979aace01f7f33e59d114955072601f590d9d4f6e0292fb6c02bf0b17fec95
name: perl-Package-Anon
arch: src
version: 0.05
epoch: 0
release: 27.fc33
summary: Anonymous packages
url: https://metacpan.org/release/Package-Anon
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Anon-0.05-27.fc33.src.rpm
checksum_type: sha256
description:
  This module allows for anonymous packages that are independent of the main
  namespace and only available through an object instance, not by name.


pkgId: 7f308325220e268ebec7df59b695a6837b09132bf800a7c727faf33c4694c098
name: perl-Package-Constants
arch: src
version: 0.06
epoch: 1
release: 18.fc33
summary: List all constants declared in a package
url: https://metacpan.org/release/Package-Constants
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Constants-0.06-18.fc33.src.rpm
checksum_type: sha256
description:
  Package::Constants lists all the constants defined in a certain package.
  This can be useful for, among others, setting up an auto-generated
  @EXPORT/@EXPORT_OK for a Constants.pm file.


pkgId: 8908ac24cdc8f109730b018b03a0df3b74d60058e48b9a74164f7966312bf2e0
name: perl-Package-DeprecationManager
arch: src
version: 0.17
epoch: 0
release: 13.fc33
summary: Manage deprecation warnings for your distribution
url: https://metacpan.org/release/Package-DeprecationManager
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-DeprecationManager-0.17-13.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to manage a set of deprecations for one or more modules.

  When you import Package::DeprecationManager, you must provide a set of
  -deprecations as a hash ref. The keys are "feature" names, and the values are
  the version when that feature was deprecated.


pkgId: 5014a50a4235bd599a5d2a9babfbe976ccc8db9b4df54532af302ccd3440436c
name: perl-Package-Generator
arch: src
version: 1.106
epoch: 0
release: 19.fc33
summary: Generate new packages quickly and easily
url: https://metacpan.org/release/Package-Generator
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Generator-1.106-19.fc33.src.rpm
checksum_type: sha256
description:
  This module lets you quickly and easily construct new packages. It gives
  them unused names and sets up their package data, if provided.


pkgId: 9c65e7d1edcb505aa31a73886e657d79010d8a660b0137b9b112afeedb6d868b
name: perl-Package-Pkg
arch: src
version: 0.0020
epoch: 0
release: 25.fc33
summary: Handy package munging utilities
url: https://metacpan.org/release/Package-Pkg
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Pkg-0.0020-25.fc33.src.rpm
checksum_type: sha256
description:
  Package::Pkg is a collection of useful, miscellaneous package-munging
  utilities. Functionality is accessed via the imported pkg keyword, although
  you can also invoke functions directly from the package (Package::Pkg).


pkgId: 8cf3070f5c0dfa87c88171acc5a2a68c54c7a3385ab85f3dfcc4924a3d79f0b7
name: perl-Package-Stash
arch: src
version: 0.38
epoch: 0
release: 8.fc33
summary: Routines for manipulating stashes
url: https://metacpan.org/release/Package-Stash
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Stash-0.38-8.fc33.src.rpm
checksum_type: sha256
description:
  Manipulating stashes (Perl's symbol tables) is occasionally necessary, but
  incredibly messy, and easy to get wrong. This module hides all of that behind
  a simple API.


pkgId: 176c86f10442715de5bea59d14f142ea7741b86a2f77882a6a233cec6cee58b7
name: perl-Package-Stash-XS
arch: src
version: 0.29
epoch: 0
release: 8.fc33
summary: Faster and more correct implementation of the Package::Stash API
url: https://metacpan.org/release/Package-Stash-XS
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Stash-XS-0.29-8.fc33.src.rpm
checksum_type: sha256
description:
  This is a back-end for Package::Stash, which provides the functionality in a
  way that's less buggy and much faster. It will be used by default if it's
  installed, and should be preferred in all environments with a compiler.


pkgId: 588bd7bb13f5a81574ed269d11e4463e2dfdd058ef476eac361ee8d84212eb6f
name: perl-Package-Variant
arch: src
version: 1.003002
epoch: 0
release: 15.fc33
summary: Parameterizable packages
url: https://metacpan.org/release/Package-Variant
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Package-Variant-1.003002-15.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to build packages that return different variations
  depending on what parameters are given.


pkgId: 1acfb26f17b110fd40a9b70aa13ae0154d141f828d12a2979daef3730a2e9eb8
name: perl-PadWalker
arch: src
version: 2.3
epoch: 0
release: 10.fc33
summary: Play with other people's lexical variables
url: https://metacpan.org/release/PadWalker
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PadWalker-2.3-10.fc33.src.rpm
checksum_type: sha256
description:
  PadWalker is a module that allows you to inspect (and even change!)
  lexical variables in any subroutine that called you. It will only show
  those variables that are in scope at the point of the call.


pkgId: 3a8025bd7ffcb3c617436f25b7ffd83cf8f2ccf6601051497cae560508860b49
name: perl-Padre
arch: src
version: 0.90
epoch: 0
release: 33.fc33
summary: Perl Application Development and Refactoring Environment
url: https://metacpan.org/release/Padre
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Padre-0.90-33.fc33.src.rpm
checksum_type: sha256
description:
  Padre is a text editor aimed to be an IDE for Perl.
  The application maintains its configuration information
  in a directory called .padre.


pkgId: b2a7ed1605ba16752db85ff540076c11f02c58c251651d9e5a67d83b158d5379
name: perl-Palm
arch: src
version: 1.400
epoch: 0
release: 17.fc33
summary: Palm OS utility functions
url: https://metacpan.org/release/Palm
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Palm-1.400-17.fc33.src.rpm
checksum_type: sha256
description:
  This module provides functions and handlers to manipulate files used
  by Palm PDAs (AddressBook, ToDo, Memo, ...).


pkgId: 77de866c87c0144fb8706842445f8b46b707e11b4e8bd132452059837925d290
name: perl-Palm-PDB
arch: src
version: 1.400
epoch: 0
release: 17.fc33
summary: Parse Palm database files
url: https://metacpan.org/release/Palm-PDB
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Palm-PDB-1.400-17.fc33.src.rpm
checksum_type: sha256
description:
  The Palm::PDB module provides a framework for reading and writing database
  files for use on PalmOS devices such as the PalmPilot. It can read and
  write both Palm Database (.pdb) and Palm Resource (.prc) files.


pkgId: 16694a284d3fe8a40921984b2a93390ff1f983f3b7394d85868bc09af69a98a2
name: perl-Pango
arch: src
version: 1.227
epoch: 0
release: 20.fc33
summary: Perl interface to the pango library
url: https://metacpan.org/release/Pango
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pango-1.227-20.fc33.src.rpm
checksum_type: sha256
description:
  perl-Pango provides Perl bindings for the text layout/rendering library
  pango. Pango is a library for laying out and rendering text, with an
  emphasis on internationalization. Pango can be used anywhere that text layout
  is needed, but using Pango in conjunction with Cairo and/or Gtk2 provides a
  complete solution with high quality text handling and graphics rendering.


pkgId: a9699bba55c0d62883afe6f2da47c63239bd8208706453259ebe03828db0050d
name: perl-Paper-Specs
arch: src
version: 0.10
epoch: 0
release: 24.fc33
summary: Size and layout information for paper stock, forms, and labels
url: https://metacpan.org/release/Paper-Specs
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Paper-Specs-0.10-24.fc33.src.rpm
checksum_type: sha256
description:
  This package provides features such as:
  - Layout PDF and PostScript documents
  - Obtain page size information
  - Support page sizes you didn't know about


pkgId: 8c71cc8bb955fa82823d6db26747640784d32c6dacad7ab9a494e3d966207bba
name: perl-Parallel-ForkManager
arch: src
version: 2.02
epoch: 0
release: 8.fc33
summary: Simple parallel processing fork manager
url: https://metacpan.org/release/Parallel-ForkManager
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-ForkManager-2.02-8.fc33.src.rpm
checksum_type: sha256
description:
  This module is intended for use in operations that can be done in parallel
  where the number of processes to be forked off should be limited. Typical
  use is a downloader which will be retrieving hundreds/thousands of files.


pkgId: 887dfca8b3b23e351b964c057b182b60d49aede7644c2573e56d519c3fdc4cae
name: perl-Parallel-Iterator
arch: src
version: 1.00
epoch: 0
release: 27.fc33
summary: Simple parallel execution
url: https://metacpan.org/release/Parallel-Iterator
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-Iterator-1.00-27.fc33.src.rpm
checksum_type: sha256
description:
  The map function applies a user supplied transformation function to
  each element in a list, returning a new list containing the
  transformed elements.

  This module provides a 'parallel map'. Multiple worker processes are forked so
  that many instances of the transformation function may be executed
  simultaneously.

  For time consuming operations, particularly operations that spend most of their
  time waiting for I/O, this is a big performance win. It also provides a simple
  idiom to make effective use of multi CPU systems.


pkgId: 8e363999f50b9faf0146d930a73d8ef0b23f2485f69906fa80593e7abe7480df
name: perl-Parallel-Pipes
arch: src
version: 0.005
epoch: 0
release: 4.fc33
summary: Parallel processing using pipes for communication and synchronization
url: https://metacpan.org/release/Parallel-Pipes
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-Pipes-0.005-4.fc33.src.rpm
checksum_type: sha256
description:
  Parallel::Pipes tries to solve problems of parallel processing for
  communication and synchronization by using pipe(2) and select(2).


pkgId: 3e526ae1bc714b2203ec6e4d3e7c615dc8fe7e0d4bad2a3e8cd2ab36c76f722f
name: perl-Parallel-Prefork
arch: src
version: 0.18
epoch: 0
release: 14.fc33
summary: Simple prefork server framework
url: https://metacpan.org/release/Parallel-Prefork
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-Prefork-0.18-14.fc33.src.rpm
checksum_type: sha256
description:
  Parallel::Prefork is much like Parallel::ForkManager, but supports graceful
  shutdown and run-time reconfiguration.


pkgId: d32a4108519a359fb3972d3eb500bb5eb45554b951e47ce405d1113412d22ec6
name: perl-Parallel-Runner
arch: src
version: 0.013
epoch: 0
release: 22.fc33
summary: An object to manage running things in parallel processes
url: https://metacpan.org/release/Parallel-Runner
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-Runner-0.013-22.fc33.src.rpm
checksum_type: sha256
description:
  There are several other modules to do this, you probably want one of them. This
  module exists as a super-specialized parallel task manager. You create the
  object with a process limit and callbacks for what to do while waiting for a
  free process slot, as well as a callback for what a process should do just
  before exiting.

  You must explicitly call $runner->finish() when you are done. If the runner is
  destroyed before its children are finished, a warning will be generated and
  your child processes will be killed, by force if necessary.

  If you specify a maximum of 1 then no forking will occur, and run() will block
  until the coderef returns. You can force a fork by providing a boolean true
  value as the second argument to run(), which will force the runner to fork
  before running the coderef; however, run() will still block until the child
  exits.


pkgId: b678ce776eb2f104440a15e51b7c093b4f55aef5b87ce3b98e469df5d8533fbe
name: perl-Parallel-Scoreboard
arch: src
version: 0.08
epoch: 0
release: 13.fc33
summary: Scoreboard for monitoring status of many processes
url: https://metacpan.org/release/Parallel-Scoreboard
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parallel-Scoreboard-0.08-13.fc33.src.rpm
checksum_type: sha256
description:
  Parallel::Scoreboard is a pure-perl implementation of a process scoreboard.
  By using the module it is easy to create a monitor for many worker process,
  like the status module of the Apache HTTP server.


pkgId: 1f8b9bb706ebf444b2ef1458268ce5dd341093723c73ab0cdc9dccc80239675b
name: perl-Params-CallbackRequest
arch: src
version: 1.20
epoch: 0
release: 19.fc33
summary: Functional and object-oriented callback architecture
url: https://metacpan.org/release/Params-CallbackRequest
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-CallbackRequest-1.20-19.fc33.src.rpm
checksum_type: sha256
description:
  Params::CallbackRequest provides functional and object-oriented callbacks
  to method and function parameters. Callbacks may be either code references
  provided to the new() constructor, or methods defined in subclasses of
  Params::Callback. Callbacks are triggered either for every call to the
  Params::CallbackRequest request() method, or by specially named keys in the
  parameters to request().


pkgId: d714b86173e0068331d10a47726e82a3018aa3f91440f474fe4c04092e287659
name: perl-Params-Check
arch: src
version: 0.38
epoch: 1
release: 457.fc33
summary: Generic input parsing/checking mechanism
url: https://metacpan.org/release/Params-Check
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-Check-0.38-457.fc33.src.rpm
checksum_type: sha256
description:
  This is a generic input parsing/checking mechanism. It allows you to
  validate input via a template. The only requirement is that the arguments
  must be named.


pkgId: 67a1951d6bdaa588ccf59fea739ac47551b105fe3396b894607402f1462103c1
name: perl-Params-Classify
arch: src
version: 0.015
epoch: 0
release: 11.fc33
summary: Argument type classification
url: https://metacpan.org/release/Params-Classify
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-Classify-0.015-11.fc33.src.rpm
checksum_type: sha256
description:
  This module provides various type-testing functions. These are intended
  for functions that, unlike most Perl code, care what type of data they
  are operating on. For example, some functions wish to behave
  differently depending on the type of their arguments (like overloaded
  functions in C++).


pkgId: 0fa5a89b5feef0ab062c4cf6c71cf61becdea428b1d88ed038ae8ebf84b7832e
name: perl-Params-Coerce
arch: src
version: 0.14
epoch: 0
release: 37.fc33
summary: Allows your classes to do coercion of parameters
url: https://metacpan.org/release/Params-Coerce
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-Coerce-0.14-37.fc33.src.rpm
checksum_type: sha256
description:
  A big part of good API design is that we should be able to be flexible in
  the ways that we take parameters. Params::Coerce attempts to encourage this,
  by making it easier to take a variety of different arguments, while adding
  negligible additional complexity to your code.


pkgId: ebbbb69fbbf001a2f530f669ccb19d3a9c06b0271cd5ffb1a3286e139995d220
name: perl-Params-Util
arch: src
version: 1.07
epoch: 0
release: 31.fc33
summary: Simple standalone parameter-checking functions
url: https://metacpan.org/release/Params-Util
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-Util-1.07-31.fc33.src.rpm
checksum_type: sha256
description:
  Params::Util provides a basic set of importable functions that
  makes checking parameters a hell of a lot easier.


pkgId: 223b28cfae16b0707660cd5810a4b6c0428aa035cf9a071d9deee517c0de48bf
name: perl-Params-Validate
arch: src
version: 1.29
epoch: 0
release: 14.fc33
summary: Params-Validate Perl module
url: https://metacpan.org/release/Params-Validate
rpm_license: Artistic 2.0 and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-Validate-1.29-14.fc33.src.rpm
checksum_type: sha256
description:
  The Params::Validate module allows you to validate method or function
  call parameters to an arbitrary level of specificity. At the simplest
  level, it is capable of validating the required parameters were given
  and that no unspecified additional parameters were passed in. It is
  also capable of determining that a parameter is of a specific type,
  that it is an object of a certain class hierarchy, that it possesses
  certain methods, or applying validation callbacks to arguments.


pkgId: 6035908cf966685cd41c77aa60f3bb6130cfc90fa9bbe817ae8cc2c34d850ccf
name: perl-Params-ValidationCompiler
arch: src
version: 0.30
epoch: 0
release: 9.fc33
summary: Build an optimized subroutine parameter validator once, use it forever
url: https://metacpan.org/release/Params-ValidationCompiler
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Params-ValidationCompiler-0.30-9.fc33.src.rpm
checksum_type: sha256
description:
  Create a customized, optimized, non-lobotomized, uncompromised, and thoroughly
  specialized parameter checking subroutine.


pkgId: 71a2f32e8c51215213df771eda7f7b555b43d312977a3bfe3a6559552cfa6e53
name: perl-Parse-CPAN-Distributions
arch: src
version: 0.14
epoch: 0
release: 17.fc33
summary: Provides an index for current CPAN distributions
url: https://metacpan.org/release/Parse-CPAN-Distributions
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-CPAN-Distributions-0.14-17.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides the ability to index the distributions that are
  currently listed on CPAN. This is done by parsing the index file find-ls.


pkgId: 1444112468cade3f746190fdd28b5587179f3e0dacba5793f7e7c684ccf7c8a2
name: perl-Parse-CPAN-Packages
arch: src
version: 2.40
epoch: 0
release: 17.fc33
summary: Parse 02packages.details.txt.gz
url: https://metacpan.org/release/Parse-CPAN-Packages
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-CPAN-Packages-2.40-17.fc33.src.rpm
checksum_type: sha256
description:
  The Comprehensive Perl Archive Network (CPAN) is a very useful collection
  of Perl code. It has several indices of the files that it hosts, including
  a file named "02packages.details.txt.gz" in the "modules" directory. This
  file contains lots of useful information and this module provides a simple
  interface to the data contained within.


pkgId: 94abf303fc86086fa17225ed5ea9c66f24d7415dab1a8b9a471447f54d5c5e99
name: perl-Parse-DMIDecode
arch: src
version: 0.03
epoch: 0
release: 25.fc33
summary: Interface to SMBIOS using dmidecode
url: https://metacpan.org/release/Parse-DMIDecode
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-DMIDecode-0.03-25.fc33.src.rpm
checksum_type: sha256
description:
  This module provides an OO interface to SMBIOS information through the
  dmidecode command which is known to work under a number of Linux, BSD and
  BeOS variants.


pkgId: 0541f97a398a04f0ac9f66f01d267bb25b919ea4723fb4d06bd93d762b72845f
name: perl-Parse-EDID
arch: src
version: 1.0.7
epoch: 0
release: 8.fc33
summary: Extended display identification data (EDID) parser
url: https://metacpan.org/release/Parse-EDID
rpm_license: GPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-EDID-1.0.7-8.fc33.src.rpm
checksum_type: sha256
description:
  This module provides some function to parse Extended Display Identification
  Data binary data structures.


pkgId: 2602748cd50a711e31d9bc4a1efdd8e8410e06fee44e40b16358a9a964bd0ce6
name: perl-Parse-ExuberantCTags
arch: src
version: 1.02
epoch: 0
release: 32.fc33
summary: Efficiently parse exuberant ctags files
url: https://metacpan.org/release/Parse-ExuberantCTags
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-ExuberantCTags-1.02-32.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module parses ctags files and handles both traditional ctags as
  well as extended ctags files such as produced with Exuberant ctags. To the
  best of my knowledge, it does not handle emacs-style "etags" files.


pkgId: b53bbedf3690ce667af30d80bc8ff996e2b226ebbd7306fbef788b0cb6b4c477
name: perl-Parse-MIME
arch: src
version: 1.005
epoch: 0
release: 6.fc33
summary: Parse MIME types, match against media ranges
url: https://metacpan.org/release/Parse-MIME
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-MIME-1.005-6.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides basic functions for handling MIME types. It can handle
  matching MIME types against a list of media ranges as specified in RFC 2616.


pkgId: 13e1a79397b35ddc6079e4e7249d222508d12164b00894f35d477b27b4c8e4af
name: perl-Parse-Method-Signatures
arch: src
version: 1.003019
epoch: 0
release: 12.fc33
summary: Perl6 like method signature parser
url: https://metacpan.org/release/Parse-Method-Signatures
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-Method-Signatures-1.003019-12.fc33.src.rpm
checksum_type: sha256
description:
  Inspired by Perl6::Signature but streamlined to just support the subset
  deemed useful for TryCatch and MooseX::Method::Signatures.


pkgId: 227ef2ab716ad39955f3a05e9604c58b47ffe445941e6396012b2c9ba2dc759f
name: perl-Parse-PMFile
arch: src
version: 0.42
epoch: 0
release: 4.fc33
summary: Parses .pm file as PAUSE does
url: https://metacpan.org/release/Parse-PMFile
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-PMFile-0.42-4.fc33.src.rpm
checksum_type: sha256
description:
  The most of the code of this module is taken from the PAUSE code as of
  April 2013 almost verbatim. Thus, the heart of this module should be quite
  stable. However, I made it not to use pipe ("-|") as well as I stripped
  database-related code. If you encounter any issue, that's most probably
  because of my modification.


pkgId: b4fddc5051c0fe86633eee206f6818e4e065dd842e304c4f0cbb459723fe178e
name: perl-Parse-RecDescent
arch: src
version: 1.967015
epoch: 0
release: 12.fc33
summary: Generate Recursive-Descent Parsers
url: https://metacpan.org/release/Parse-RecDescent
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-RecDescent-1.967015-12.fc33.src.rpm
checksum_type: sha256
description:
  Parse::RecDescent incrementally generates top-down recursive-descent
  text parsers from simple yacc-like grammar specifications. It
  provides:

   * Regular expressions or literal strings as terminals (tokens)
   * Multiple (non-contiguous) productions for any rule
   * Repeated and optional subrules within productions
   * Full access to Perl within actions specified as part of the grammar
   * Simple automated error reporting during parser generation and parsing
   * The ability to commit to, uncommit to, or reject particular
     productions during a parse
   * The ability to pass data up and down the parse tree ("down" via
     subrule argument lists, "up" via subrule return values)
   * Incremental extension of the parsing grammar (even during a parse)
   * Precompilation of parser objects
   * User-definable reduce-reduce conflict resolution via "scoring" of
     matching productions


pkgId: 5e1b727de9164511006a0bbf0ec1f4b55eea5f65dbf1905522dcc4a10fefe186
name: perl-Parse-Yapp
arch: src
version: 1.21
epoch: 0
release: 9.fc33
summary: Perl extension for generating and using LALR parsers
url: https://metacpan.org/release/Parse-Yapp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Parse-Yapp-1.21-9.fc33.src.rpm
checksum_type: sha256
description:
  Parse::Yapp (Yet Another Perl Parser compiler) is a collection of modules that
  let you generate and use yacc like thread safe (reentrant) parsers with perl
  object oriented interface.  The script yapp is a front-end to the Parse::Yapp
  module and let you easily create a Perl OO parser from an input grammar file.


pkgId: 5601ab688e31f56a4df47c0f1634560a273c102502b1b1c18ee6b1e10051e968
name: perl-ParseTemplate
arch: src
version: 3.08
epoch: 0
release: 19.fc33
summary: Processor for templates containing Perl expressions
url: https://metacpan.org/release/ParseTemplate
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ParseTemplate-3.08-19.fc33.src.rpm
checksum_type: sha256
description:
  The Parse::Template class evaluates Perl expressions placed within a text.
  This class can be used as a code generator, or a generator of documents in
  various document formats (HTML, XML, RTF, etc.).


pkgId: ed69317390ec0f9fed33f4a9c3cfa3a000a082d71615fd8548907c9b64e5cd37
name: perl-ParseUtil-Domain
arch: src
version: 2.427
epoch: 0
release: 10.fc33
summary: Utility for parsing a domain name into its components
url: https://metacpan.org/release/ParseUtil-Domain
rpm_license: (GPL+ or Artistic) and MPLv2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ParseUtil-Domain-2.427-10.fc33.src.rpm
checksum_type: sha256
description:
  A tool for parsing domain names. This module makes use of the data provided
  by the Public Suffix List (http://publicsuffix.org/list/) to parse TLDs.


pkgId: f309567c138afda1cc5a3438a65cc75434bfa57dc6782b1a546c29d145b6cd2a
name: perl-PatchReader
arch: src
version: 0.9.6
epoch: 0
release: 24.fc33
summary: Utilities to read and manipulate patches and CVS
url: https://metacpan.org/release/PatchReader
rpm_license: MPLv1.1 and Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PatchReader-0.9.6-24.fc33.src.rpm
checksum_type: sha256
description:
  PatchReader is a set of utilities for reading in, transforming, and doing
  various other things with a patch.  It basically allows you to create a
  chain of readers that can read a patch, remove files from a patch, add
  CVS context, fix up the patch root according to CVS, and output the patch
  as raw unified or through a template processor (used in some places to
  output a patch as HTML).


pkgId: 92c188965dbedb8fb7163d05c3c2f17fb9b5d29e4124f7b64f0330d5afc2b55d
name: perl-Path-Class
arch: src
version: 0.37
epoch: 0
release: 17.fc33
summary: Cross-platform path specification manipulation
url: https://metacpan.org/release/Path-Class
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Path-Class-0.37-17.fc33.src.rpm
checksum_type: sha256
description:
  Path::Class is a module for manipulation of file and directory specifications
  (strings describing their locations, like '/home/ken/foo.txt' or
  'C:\Windows\Foo.txt') in a cross-platform manner. It supports pretty much every
  platform Perl runs on, including Unix, Windows, Mac, VMS, Epoc, Cygwin, OS/2,
  and NetWare.


pkgId: 057699c97da5f10d2688408f16a2104e6e88f91a9a733285433eef6c47a4d263
name: perl-Path-IsDev
arch: src
version: 1.001003
epoch: 0
release: 12.fc33
summary: Determine if a given Path resembles a development source tree
url: https://metacpan.org/release/Path-IsDev
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Path-IsDev-1.001003-12.fc33.src.rpm
checksum_type: sha256
description:
  This module is more or less a bunch of heuristics for determining if a
  given path is a development tree root of some kind.

  This has many useful applications, notably ones that require behaviors for
  "installed" modules to be different to those that are still "in
  development"


pkgId: 9e18b7ee683bde9ad8a13246d77785e1e801f1514c67a11f3d1588d6ebdd4696
name: perl-Path-Iterator-Rule
arch: src
version: 1.014
epoch: 0
release: 9.fc33
summary: Iterative, recursive file finder
url: https://metacpan.org/release/Path-Iterator-Rule
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Path-Iterator-Rule-1.014-9.fc33.src.rpm
checksum_type: sha256
description:
  This module iterates over files and directories to identify ones matching a
  user-defined set of rules.


pkgId: 9843eaf16add78eb27c3ea9e97cb27e496e4c8c5119e83ac5bd277df35900ffa
name: perl-Path-Tiny
arch: src
version: 0.114
epoch: 0
release: 3.fc33
summary: File path utility
url: https://metacpan.org/release/Path-Tiny
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Path-Tiny-0.114-3.fc33.src.rpm
checksum_type: sha256
description:
  This module attempts to provide a small, fast utility for working with file
  paths. It is friendlier to use than File::Spec and provides easy access to
  functions from several other core file handling modules.

  It doesn't attempt to be as full-featured as IO::All or Path::Class, nor does
  it try to work for anything except Unix-like and Win32 platforms. Even then, it
  might break if you try something particularly obscure or tortuous.

  All paths are forced to have Unix-style forward slashes. Stringifying the
  object gives you back the path (after some clean up).

  File input/output methods flock handles before reading or writing, as
  appropriate.

  The *_utf8 methods (slurp_utf8, lines_utf8, etc.) operate in raw mode without
  CRLF translation.


pkgId: 1f12d113b8f6bc6ad051c29f81066963611f7b438bb38cadd956e61b5de9a246
name: perl-Path-Tiny-Rule
arch: src
version: 0.02
epoch: 0
release: 4.fc33
summary: Path::Iterator::Rule subclass that returns Path::Tiny objects
url: https://metacpan.org/release/Path-Tiny-Rule
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Path-Tiny-Rule-0.02-4.fc33.src.rpm
checksum_type: sha256
description:
  This module is a very thin wrapper around Path::Iterator::Rule that
  always returns Path::Tiny objects instead of strings. It should otherwise
  be a drop-in replacement for Path::Iterator::Rule, and any deviation from
  that is a bug.


pkgId: e7c517855dd8b7b69e136f9d6eb7e066eec7f7f6f5a3fb937cb98500193a2e53
name: perl-Pegex
arch: src
version: 0.75
epoch: 0
release: 4.fc33
summary: Pegex Parser Generator
url: https://metacpan.org/release/Pegex
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pegex-0.75-4.fc33.src.rpm
checksum_type: sha256
description:
  Pegex is an Acmeist parser framework. It is a PEG parser grammar syntax,
  combined with PCRE compatible regular expressions as the match tokens.
  Pegex draws heavily from Perl 6 rules, but works equivalently in many
  modern programming languages.


pkgId: 08913f91bbbd55658d3963da22df25d761b38307708d3c04e9d2a52697e18991
name: perl-Perl-Critic
arch: src
version: 1.138
epoch: 0
release: 6.fc33
summary: Critique Perl source code for best-practices
url: https://metacpan.org/release/Perl-Critic
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-1.138-6.fc33.src.rpm
checksum_type: sha256
description:
  Perl::Critic is an extensible framework for creating and applying coding
  standards to Perl source code. Essentially, it is a static source code
  analysis engine. Perl::Critic is distributed with a number of
  Perl::Critic::Policy modules that attempt to enforce various coding
  guidelines. Most Policy modules are based on Damian Conway's book Perl
  Best Practices. However, Perl::Critic is not limited to PBP and will
  even support Policies that contradict Conway. You can enable, disable,
  and customize those Polices through the Perl::Critic interface. You can
  also create new Policy modules that suit your own tastes.


pkgId: 530ec1d84dba7d3aca998f5c58af21ee274ef8c10aef8ab84f8db9674566d538
name: perl-Perl-Critic-Bangs
arch: src
version: 1.12
epoch: 0
release: 12.fc33
summary: Collection of handy Perl::Critic policies
url: https://metacpan.org/release/Perl-Critic-Bangs
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-a64-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Bangs-1.12-12.fc33.src.rpm
checksum_type: sha256
description:
  The rules included with the Perl::Critic::Bangs group include:
    - Commented-out code is usually noise.  It should be removed.
    - Watch for comments like "XXX", "TODO", etc.
    - Tests should have a plan.
    - Variables like $user and $user2 are insufficiently distinguished.
    - Determining the class in a constructor by using "ref($proto) || $proto".
    - Adding modifiers to a regular expression made up entirely of a variable
    created with qr() is usually not doing what you expect.
    - Vague variables like $data or $info are not descriptive enough.


pkgId: 411136444eb90ab00815bd7a8a5f33cac89960c9edb16ae521a205e6d4ebd879
name: perl-Perl-Critic-Compatibility
arch: src
version: 1.001
epoch: 0
release: 27.fc33
summary: Perl::Critic policies for compatibility with Perl versions
url: https://metacpan.org/release/Perl-Critic-Compatibility
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Compatibility-1.001-27.fc33.src.rpm
checksum_type: sha256
description:
  Some Perl::Critic policies that will help you keep your code compatible with
  other versions of Perl, regardless of the version that you're developing with.
  This includes both backward and forward compatibility.


pkgId: 4b5c539a29bf590aed8324616c7bacc1441f57631c61981524750a7f0c922c37
name: perl-Perl-Critic-Deprecated
arch: src
version: 1.119
epoch: 0
release: 19.fc33
summary: Perl::Critic policies which have been superseded by others
url: https://metacpan.org/release/Perl-Critic-Deprecated
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Deprecated-1.119-19.fc33.src.rpm
checksum_type: sha256
description:
  The included policies are:
    - Write "$my_variable = 42" instead of "$MyVariable = 42".
    - Write "sub my_function{}" instead of "sub MyFunction{}".
    - Put source-control keywords in every file.


pkgId: cd9052138b109c2d30324aee58e05466acab2e3742eac9fc5dd42dbcc36e561d
name: perl-Perl-Critic-Dynamic
arch: src
version: 0.05
epoch: 0
release: 25.fc33
summary: Non-static policies for Perl::Critic
url: https://metacpan.org/release/Perl-Critic-Dynamic
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Dynamic-0.05-25.fc33.src.rpm
checksum_type: sha256
description:
  Perl::Critic is primarily used as a static source code analyzer, which means
  that it never compiles or executes any of the code that it examines. But
  since Perl is a dynamic language, there are certain types of problems that
  cannot be discovered until the code is actually compiled.

  This distribution includes Perl::Critic::DynamicPolicy, which can be used as
  a base class for Policies that wish to compile the code they analyze.


pkgId: 3e40b49ddaa713c569dc2fbeb93e1262edf0f5c94cae8cd43fa7ab692498bb14
name: perl-Perl-Critic-Itch
arch: src
version: 0.07
epoch: 0
release: 24.fc33
summary: Collection of Perl::Critic policies to solve some itches
url: https://metacpan.org/release/Perl-Critic-Itch
rpm_license: GPLv3+ or Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Itch-0.07-24.fc33.src.rpm
checksum_type: sha256
description:
  Perl::Critic::Itch was created to fulfill some special requests when analyzing
  Perl Code. This policies, may not be useful to everyone, and surely not
  consensual, but they solve some little itches I had, and it makes me sleep
  better at night!


pkgId: e9de7d1790227ed0ee801575abf2097c5dacddd181ce8e4b54c26373a1c123d5
name: perl-Perl-Critic-Lax
arch: src
version: 0.013
epoch: 0
release: 12.fc33
summary: Policies that let you slide on common exceptions
url: https://metacpan.org/release/Perl-Critic-Lax
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Lax-0.013-12.fc33.src.rpm
checksum_type: sha256
description:
  The Perl-Critic-Lax distribution includes versions of core Perl::Critic
  modules with built-in exceptions. If you really like a Perl::Critic policy,
  but find that you often violate it in a specific way that seems pretty darn
  reasonable, maybe there's a Lax policy. If there isn't, send one in!


pkgId: 90573c1ec9c6a0b19ef5d4cd0f1b0bbfd11c077e66e08d85571b99f57abe7831
name: perl-Perl-Critic-More
arch: src
version: 1.003
epoch: 0
release: 19.fc33
summary: Supplemental policies for Perl::Critic
url: https://metacpan.org/release/Perl-Critic-More
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-More-1.003-19.fc33.src.rpm
checksum_type: sha256
description:
  This is a collection of Perl::Critic policies that are not included in the
  Perl::Critic core for a variety of reasons.


pkgId: 47e40e1311fb84123cbe6f04e20aa5feefdd9153eb0d4ef1ca9149478bed99ed
name: perl-Perl-Critic-Nits
arch: src
version: 1.0.0
epoch: 0
release: 27.fc33
summary: Policies of nits I like to pick
url: https://metacpan.org/release/Perl-Critic-Nits
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Nits-1.0.0-27.fc33.src.rpm
checksum_type: sha256
description:
  The included policy is
  Perl::Critic::Policy::ValuesAndExpressions::ProhibitAccessOfPrivateData.
  It prohibits direct access to a hash-based object's hash.


pkgId: d289b13e7aa3c7975dd50314aeca499b77966fec3b753859f705c756cfcc456b
name: perl-Perl-Critic-PetPeeves-JTRAMMELL
arch: src
version: 0.04
epoch: 0
release: 19.fc33
summary: Policies to prohibit/require my pet peeves
url: https://metacpan.org/release/Perl-Critic-PetPeeves-JTRAMMELL
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-PetPeeves-JTRAMMELL-0.04-19.fc33.src.rpm
checksum_type: sha256
description:
  Module Perl::Critic::PetPeeves::JTRAMMELL provides policies that I want
  that haven't already been implemented elsewhere.


pkgId: 0f705bfa49586dd9484108fa01b0521c09c05472bd070140fcb5585b58362222
name: perl-Perl-Critic-Pulp
arch: src
version: 97
epoch: 0
release: 5.fc33
summary: Some add-on perlcritic policies
url: https://metacpan.org/release/Perl-Critic-Pulp
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Pulp-97-5.fc33.src.rpm
checksum_type: sha256
description:
  This is a collection of add-on policies for Perl::Critic.  They're under
  a "pulp" theme plus other themes according to their purpose (see "POLICY
  THEMES" in Perl::Critic).


pkgId: 65b332a30d8c7b23c4596ff77d9aa2ea7cc4eea99030c6ccaaa8300408c78327
name: perl-Perl-Critic-StricterSubs
arch: src
version: 0.05
epoch: 0
release: 17.fc33
summary: Perl::Critic plugin for stricter subroutine checks
url: https://metacpan.org/release/Perl-Critic-StricterSubs
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-StricterSubs-0.05-17.fc33.src.rpm
checksum_type: sha256
description:
  As a dynamic language, Perl doesn't require you to define subroutines until
  run-time. Although this is a powerful feature, it can also be a major source
  of bugs. The Perl::Critic::Policy modules in this distribution are aimed at
  reducing errors caused by invoking subroutines that are not defined.


pkgId: d866ebf00a1f8cf58ba292795bf4273386b7882e95c6911a7ecac60eed8cb922
name: perl-Perl-Critic-Swift
arch: src
version: 1.0.3
epoch: 0
release: 30.fc33
summary: Set of additional policies for Perl::Critic
url: https://metacpan.org/release/Perl-Critic-Swift
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Swift-1.0.3-30.fc33.src.rpm
checksum_type: sha256
description:
  Some Perl::Critic policies to make your code more clean. The included
  policies are:

      * Perl::Critic::Policy::CodeLayout::RequireUseUTF8
      * Perl::Critic::Policy::Documentation::RequirePODUseEncodingUTF8


pkgId: 2eeb9fd8e3c8aebc5080109766a06ba82252c10628c41d17fd4170f9a3e11e1b
name: perl-Perl-Critic-Tics
arch: src
version: 0.009
epoch: 0
release: 18.fc33
summary: Policies for things that make me wince
url: https://metacpan.org/release/Perl-Critic-Tics
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Critic-Tics-0.009-18.fc33.src.rpm
checksum_type: sha256
description:
  The Perl-Critic-Tics distribution includes extra policies for Perl::Critic
  to address a fairly random assortment of things that make me (rjbs) wince.


pkgId: 90fe900604911af98105a4eef97f880d8766cbcb35e4fc89fae683c91c6b3af1
name: perl-Perl-Destruct-Level
arch: src
version: 0.02
epoch: 0
release: 28.fc33
summary: Allows you to change perl's internal destruction level
url: https://metacpan.org/release/Perl-Destruct-Level
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Destruct-Level-0.02-28.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to change perl's internal destruction level. The
  default value of the destruct level is 0; it means that perl won't bother
  destroying all of its internal data structures and lets the OS do the cleanup
  for it at exit.

  For perls built with debugging support (-DDEBUGGING), an environment variable
  PERL_DESTRUCT_LEVEL allows you to control the destruction level. This module
  enables you to modify it on non-debugging perls too.

  Note that some embedded environments might extend the meaning of the
  destruction level for their own purposes: mod_perl does that, for example.


pkgId: 9b54a6a81a9609af7b38433ad97631d94d9cf169d96204952fb0041ae2b2e096
name: perl-Perl-Metrics-Simple
arch: src
version: 0.18
epoch: 0
release: 18.fc33
summary: Count packages, subs, lines, etc. of many files
url: https://metacpan.org/release/Perl-Metrics-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Metrics-Simple-0.18-18.fc33.src.rpm
checksum_type: sha256
description:
  Perl::Metrics::Simple provides just enough methods to run static analysis
  of one or many Perl files and obtain a few metrics: packages, subroutines,
  lines of code, and an approximation of cyclomatic (McCabe) complexity for
  the subroutines and the "main" portion of the code.


pkgId: 72ec0f9bcfac08ca1aec91960b0d377a405911f37f75a0887afa14a573b9fa1c
name: perl-Perl-OSType
arch: src
version: 1.010
epoch: 0
release: 458.fc33
summary: Map Perl operating system names to generic types
url: https://metacpan.org/release/Perl-OSType
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-OSType-1.010-458.fc33.src.rpm
checksum_type: sha256
description:
  Modules that provide OS-specific behaviors often need to know if the current
  operating system matches a more generic type of operating systems. For example,
  'linux' is a type of 'Unix' operating system and so is 'freebsd'.

  This module provides a mapping between an operating system name as given by $^O
  and a more generic type. The initial version is based on the OS type mappings
  provided in Module::Build and ExtUtils::CBuilder (thus, Microsoft operating
  systems are given the type 'Windows' rather than 'Win32').


pkgId: 2ae2f689659050c3b75579a019637387827f0db1c71976d77aef176fa5a34050
name: perl-Perl-PrereqScanner-NotQuiteLite
arch: src
version: 0.9911
epoch: 0
release: 3.fc33
summary: A tool to scan your Perl code for its prerequisites
url: https://metacpan.org/release/Perl-PrereqScanner-NotQuiteLite
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-PrereqScanner-NotQuiteLite-0.9911-3.fc33.src.rpm
checksum_type: sha256
description:
  Perl::PrereqScanner::NotQuiteLite is yet another prerequisites scanner. It
  passes almost all the scanning tests for Perl::PrereqScanner and
  Module::ExtractUse (i.e. except for a few dubious ones), and runs slightly
  faster than PPI-based Perl::PrereqScanner. However, it doesn't run as fast as
  Perl::PrereqScanner::Lite (which uses an XS lexer).

  Perl::PrereqScanner::NotQuiteLite also recognizes eval. Prerequisites in eval
  are not considered as requirements, but you can collect them as suggestions.

  Conditional requirements or requirements loaded in a block are treated as
  recommends. No-ed modules are stored separately (since 0.94). You may or may
  not need to merge them into requires.


pkgId: 7db5f7541491e4991761468bc9266ccab79a9574e9cb0cac400abdefffdfefac
name: perl-Perl-Stripper
arch: src
version: 0.10
epoch: 0
release: 10.fc33
summary: Yet another PPI-based Perl source code stripper
url: https://metacpan.org/release/Perl-Stripper
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Stripper-0.10-10.fc33.src.rpm
checksum_type: sha256
description:
  This module is yet another PPI-based Perl source code stripper. Its focus
  is on customization and stripping significant information from source code.


pkgId: e2d2c5d01941e17c41844af16cff1c0341b35d03e2eff6b58c7672ea046fe3cb
name: perl-Perl-Tags
arch: src
version: 0.32
epoch: 0
release: 18.fc33
summary: Generate Ctags style tags for Perl source code
url: https://metacpan.org/release/Perl-Tags
rpm_license: (GPL+ or Artistic) or Vim
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Tags-0.32-18.fc33.src.rpm
checksum_type: sha256
description:
  Generate (possibly exuberant) Ctags style tags for Perl source code.

  Recursively follows use and require statements, up to a maximum of max_level.

  The implemented tagger, Perl::Tags::Naive is a more-or-less straight ripoff,
  slightly updated, of the original pltags code, and is rather naive. It should
  be possible to subclass using something like PPI or Text::Balanced, though be
  aware that this is alpha software and the internals are subject to change.


pkgId: 8d5fcbd6395c68aff91531dbf696d061809ef0af190ff5540b40fe6c68b48837
name: perl-Perl-Tidy-Sweetened
arch: src
version: 1.16
epoch: 0
release: 3.fc33
summary: Tweaks to Perl::Tidy to support some syntactic sugar
url: https://metacpan.org/release/Perl-Tidy-Sweetened
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Tidy-Sweetened-1.16-3.fc33.src.rpm
checksum_type: sha256
description:
  There are a number of modules on CPAN that allow users to write their
  classes with a more "modern" syntax. These tools eliminate the need to
  shift off $self, can support type checking and offer other improvements.
  Unfortunately, they can break the support tools that the Perl community has
  come to rely on. This module attempts to work around those issues.


pkgId: 5bcbb79ef14f39e84677a1a5d2a896fe1e805facd3e33390d9d510467d69501d
name: perl-Perl-Version
arch: src
version: 1.013
epoch: 0
release: 17.fc33
summary: Parse and manipulate Perl version strings
url: https://metacpan.org/release/Perl-Version
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl-Version-1.013-17.fc33.src.rpm
checksum_type: sha256
description:
  Perl::Version provides a simple interface for parsing, manipulating and
  formatting Perl version strings.


pkgId: 35811e6a670774e866b1846e7cf03d62642492a0c1a302da72e78804ac62504a
name: perl-Perl4-CoreLibs
arch: src
version: 0.004
epoch: 0
release: 12.fc33
summary: Libraries historically supplied with Perl 4
url: https://metacpan.org/release/Perl4-CoreLibs
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl4-CoreLibs-0.004-12.fc33.src.rpm
checksum_type: sha256
description:
  This is a collection of .pl files that have historically been bundled with the
  Perl core and were removed from perl 5.16.  These files should not be used by
  new code.  Functionally, most have been directly superseded by modules in the
  Perl 5 style. This collection exists to support old Perl programs that
  predates satisfactory replacements.


pkgId: 5e12f9bd05aca58f7eff236f1d2b9b67cc90a8801fe15645cc7a9d0d34a50378
name: perl-Perl6-Caller
arch: src
version: 0.100
epoch: 0
release: 21.fc33
summary: OO caller() interface
url: https://metacpan.org/release/Perl6-Caller
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl6-Caller-0.100-21.fc33.src.rpm
checksum_type: sha256
description:
  By default, this module exports the caller function. This automatically
  returns a new caller object. An optional argument specifies how many stack
  frames back to skip, just like the CORE::caller function. This lets you do
  things like this:

      print "In ",           caller->subroutine,
            " called from ", caller->filename,
            " line ",        caller->line;

  If you do not wish the caller function imported, specify an empty import list
  and instantiate a new Perl6::Caller object.

      use Perl6::Caller ();
      my $caller = Perl6::Caller->new;
      print $caller->line;

  Note: if the results from the module seem strange, please read
  perldoc -s caller carefully. It has stranger behavior than you might be aware.


pkgId: 974ea34af60d24cf4387e620f2e0d2143d33c9d2928e61b5a0e19f42545f1be5
name: perl-Perl6-Junction
arch: src
version: 1.60000
epoch: 0
release: 20.fc33
summary: Perl6 style Junction operators in Perl5
url: https://metacpan.org/release/Perl6-Junction
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl6-Junction-1.60000-20.fc33.src.rpm
checksum_type: sha256
description:
  Perl6 style Junction operators in Perl5.

  This is a lightweight module which provides 'Junction' operators, the most
  commonly used being 'any' and 'all'.

  Inspired by the Perl6 design docs,
  <http://dev.perl.org/perl6/doc/design/exe/E06.html.

  Provides a limited subset of the functionality of L<Quantum::Superpositions>.


pkgId: 1828f9cd5358b5455167115b7ded198a07ac4249f7fdf1bae978f4df01f94526
name: perl-Perl6-Slurp
arch: src
version: 0.051005
epoch: 0
release: 20.fc33
summary: Implemention of the Perl 6 'slurp' built-in
url: https://metacpan.org/release/Perl6-Slurp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perl6-Slurp-0.051005-20.fc33.src.rpm
checksum_type: sha256
description:
  slurp takes:

  a filename,
  a filehandle,
  a typeglob reference,
  an IO::File object, or
  a scalar reference,

  converts it to an input stream (using open() if necessary),
  and reads in the entire stream. If slurp fails to set up or
  read the stream, it throws an exception.


pkgId: 13e377a9d6d1b97e5c0e3b9edf1250e5e40d623a818fe93336edccc8bee9c530
name: perl-PerlIO-Layers
arch: src
version: 0.012
epoch: 0
release: 3.fc33
summary: Querying your file handle capabilities
url: https://metacpan.org/release/PerlIO-Layers
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-Layers-0.012-3.fc33.src.rpm
checksum_type: sha256
description:
  Perl file handles are implemented as a stack of layers, with the bottom-most
  usually doing the actual IO and the higher ones doing buffering,
  encoding/decoding or transformations. PerlIO::Layers allows you to query the
  file handle properties concerning these layers.


pkgId: 0a6e8dfc0b9d9f103959626243db5452789a9076ba912107c540d88a9dac650a
name: perl-PerlIO-buffersize
arch: src
version: 0.002
epoch: 0
release: 4.fc33
summary: Set the buffersize of a handle
url: https://metacpan.org/release/PerlIO-buffersize
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-buffersize-0.002-4.fc33.src.rpm
checksum_type: sha256
description:
  This module sets the buffer-size of a file handle to an other value than the
  default. This can only be done before the handle is used, as once the
  buffer has been allocated it can not be changed.


pkgId: 12cd7fd6eca9b50cf1c5533668268e121bbd79f109f203318ec793bda1d9f1aa
name: perl-PerlIO-eol
arch: src
version: 0.17
epoch: 0
release: 10.fc33
summary: PerlIO layer for normalizing line endings
url: https://metacpan.org/release/PerlIO-eol
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-eol-0.17-10.fc33.src.rpm
checksum_type: sha256
description:
  This layer normalizes any of CR, LF, CRLF and Native into the designated
  line ending. It works for both input and output handles.


pkgId: 3d7ca2002592547e5c0567d73562a249ec0e14fd4576002ebafa3d894a72f96a
name: perl-PerlIO-gzip
arch: src
version: 0.20
epoch: 0
release: 13.fc33
summary: Perl extension to provide a PerlIO layer to gzip/gunzip
url: https://metacpan.org/release/PerlIO-gzip
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-gzip-0.20-13.fc33.src.rpm
checksum_type: sha256
description:
  PerlIO::gzip provides a PerlIO layer that manipulates files in the format
  used by the gzip program. Compression and decompression are implemented.

  This is akin to Compress::Zlib, except that it operates at the lower PerlIO
  layer.


pkgId: 3d988defd12e9b9bb49c67976432072d07e59ab8fa591e2ec7853a402301efee
name: perl-PerlIO-locale
arch: src
version: 0.10
epoch: 0
release: 22.fc33
summary: PerlIO layer to use the encoding of the current locale
url: https://metacpan.org/release/PerlIO-locale
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-locale-0.10-22.fc33.src.rpm
checksum_type: sha256
description:
  This is mostly a per-file-handle version of the open pragma, when used under
  the form:

  use open ':locale';

  The encoding for the opened file will be set to the encoding corresponding to
  the locale currently in effect, if perl can guess it.


pkgId: 474d64dbe79b7031b71e12c85d348dd3d6cd4fe71e1f11ff2b4e062d1b5d7d1e
name: perl-PerlIO-utf8_strict
arch: src
version: 0.007
epoch: 0
release: 13.fc33
summary: Fast and correct UTF-8 I/O
url: https://metacpan.org/release/PerlIO-utf8_strict
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-utf8_strict-0.007-13.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a fast and correct UTF-8 PerlIO layer. Unlike perl's
  default :utf8 layer it checks the input for correctness.


pkgId: 2a0f4d5722019a9679d4e311cde11b13e3f459c69b6f050751ca5265f8871b12
name: perl-PerlIO-via-QuotedPrint
arch: src
version: 0.08
epoch: 0
release: 457.fc33
summary: PerlIO layer for quoted-printable strings
url: https://metacpan.org/release/PerlIO-via-QuotedPrint
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-via-QuotedPrint-0.08-457.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a PerlIO layer that works on files encoded in the
  quoted-printable format. It will decode from quoted-printable while
  reading from a handle, and it will encode as quoted-printable while
  writing to a handle.


pkgId: fa6058b1af7fb1bb13b27e78df75125e866abfa2f9cba05c90b45288230b59ec
name: perl-PerlIO-via-Timeout
arch: src
version: 0.32
epoch: 0
release: 17.fc33
summary: PerlIO layer that adds read & write timeout to a handle
url: https://metacpan.org/release/PerlIO-via-Timeout
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-via-Timeout-0.32-17.fc33.src.rpm
checksum_type: sha256
description:
  This package implements a PerlIO layer, that adds read / write timeout.
  This can be useful to avoid blocking while accessing a handle (file,
  socket, ...), and fail after some time.


pkgId: 57074e2f7832d72fc6dd7143e2130c7e0d4c61d79e31a4ca668604ef122af1b8
name: perl-PerlIO-via-dynamic
arch: src
version: 0.14
epoch: 0
release: 23.fc33
summary: Dynamic PerlIO layers
url: https://metacpan.org/release/PerlIO-via-dynamic
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlIO-via-dynamic-0.14-23.fc33.src.rpm
checksum_type: sha256
description:
  PerlIO::via::dynamic is used for creating dynamic PerlIO layers. It is
  useful when the behavior or the layer depends on variables. You should not
  use this module as via layer directly (ie :via(dynamic)).


pkgId: f3bbf8e12221ef26da099ed10451d147e7b775c53dac26d2344e87e5b209dae0
name: perl-PerlX-Maybe
arch: src
version: 1.201
epoch: 0
release: 7.fc33
summary: Return a pair only if they are both defined
url: https://metacpan.org/release/PerlX-Maybe
rpm_license: (GPL+ or Artistic) and CC-BY-SA and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PerlX-Maybe-1.201-7.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides a syntax sugar for passing a pair of variables only
  if both of them match some criteria (to be defined usually).


pkgId: 08f96e018f5dc2ee2fd7a50291952fca26dfad9566efe9b73c10dad7a9878c25
name: perl-Perlbal-XS-HTTPHeaders
arch: src
version: 0.20
epoch: 0
release: 37.fc33
summary: Perlbal extension for processing HTTP headers
url: https://metacpan.org/release/Perlbal-XS-HTTPHeaders
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perlbal-XS-HTTPHeaders-0.20-37.fc33.src.rpm
checksum_type: sha256
description:
  This module is used to read HTTP headers from a string and to parse them
  into an internal storage format for easy access and modification. You can
  also ask the module to reconstitute the headers into one big string, useful
  if you're writing a proxy and need to read and write headers while
  maintaining the ability to modify individual parts of the whole.


pkgId: e52895055048681cdbf717ab1e7d42a2ac4b8c63f54a353b87c1b12df054ba81
name: perl-Perlilog
arch: src
version: 1.0
epoch: 0
release: 14.fc33
summary: Verilog environment and IP core handling in Perl
url: https://metacpan.org/release/Perlilog
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Perlilog-1.0-14.fc33.src.rpm
checksum_type: sha256
description:
  Perlilog is a command-line tool which generates Verilog
  modules from a set of files, which come in several other
  formats. It was originally designed to integrate Verilog IP cores.


pkgId: 35c894f0c2c0f345f13796f8f54cdff9deb9c95e73b38cc9ad43c388c644f31a
name: perl-Pinto
arch: src
version: 0.14
epoch: 1
release: 10.fc33
summary: Curate a repository of Perl modules
url: https://metacpan.org/release/Pinto
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pinto-0.14-10.fc33.src.rpm
checksum_type: sha256
description:
  Pinto is an application for creating and managing a custom CPAN-like
  repository of Perl modules. The purpose of such a repository is to provide
  a stable, curated stack of dependencies from which you can reliably build,
  test, and deploy your application using the standard Perl tool chain. Pinto
  supports various operations for gathering and managing distribution
  dependencies within the repository, so that you can control precisely which
  dependencies go into your application.


pkgId: f82ac8f52bd9d4ed4dfc51fb209fa3e2922203584882d0bdcb660866eede2ea9
name: perl-Pipeline
arch: src
version: 3.12
epoch: 0
release: 38.fc33
summary: Generic pipeline interface
url: https://metacpan.org/release/Pipeline
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pipeline-3.12-38.fc33.src.rpm
checksum_type: sha256
description:
  Pipelines are a mechanism to process data. They are designed to be plugged
  together to make fairly complex operations act in a fairly straightforward
  manner, cleanly, and simply.


pkgId: 5ab9e03f8352471a56584300e69f4b8298c783fed21b3e60e937bf9708f0d46e
name: perl-PkgConfig-LibPkgConf
arch: src
version: 0.11
epoch: 0
release: 3.fc33
summary: Interface to pkg-config files via libpkgconf
url: https://metacpan.org/release/PkgConfig-LibPkgConf
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-PkgConfig-LibPkgConf-0.11-3.fc33.src.rpm
checksum_type: sha256
description:
  Many libraries in compiled languages such as C or C++ provide *.pc files to
  specify the flags required for compiling and linking against those libraries.
  Traditionally, the command line program pkg-config is used to query these
  files. This package provides a Perl-level API using libpkgconf to these files.


pkgId: 3fc3cf8939955c8bacab18691829b8d4fc8da96397bce2eecceaae2271053890
name: perl-Plack
arch: src
version: 1.0047
epoch: 0
release: 10.fc33
summary: Perl Superglue for Web frameworks and Web Servers (PSGI toolkit)
url: https://metacpan.org/release/Plack
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-1.0047-10.fc33.src.rpm
checksum_type: sha256
description:
  Plack is a set of tools for using the PSGI stack. It contains middleware
  components, a reference server and utilities for Web application
  frameworks. Plack is like Ruby's Rack or Python's Paste for WSGI.


pkgId: b236cd586d8b8a5606e1846cdc9b506987c05e4bc5e2ce3b5ce4ec0eea944c88
name: perl-Plack-Middleware-Deflater
arch: src
version: 0.12
epoch: 0
release: 20.fc33
summary: Compress response body with Gzip or Deflate
url: https://metacpan.org/release/Plack-Middleware-Deflater
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-Deflater-0.12-20.fc33.src.rpm
checksum_type: sha256
description:
  Plack::Middleware::Deflater is a middleware to encode your response body in
  gzip or deflate, based on Accept-Encoding HTTP request header. It would
  save the bandwidth a little bit but should increase the Plack server load,
  so ideally you should handle this on the front end reverse proxy servers.


pkgId: 98e23b0ef1d97ad33d61c1be5f0db10b6b6aeb4621cb966e0f37a4e1324d925d
name: perl-Plack-Middleware-ForceEnv
arch: src
version: 0.02
epoch: 0
release: 25.fc33
summary: Force set environment variables for testing
url: https://metacpan.org/release/Plack-Middleware-ForceEnv
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-ForceEnv-0.02-25.fc33.src.rpm
checksum_type: sha256
description:
  ForceEnv modifies the environment passed to the application by adding your
  specified key value pairs. This is primarily useful when testing apps under
  plackup (or similar) in a development environment.


pkgId: 5f424bae83ad09eb613858ff11bcffa16cb6d645a3572a63bc0546450d415b57
name: perl-Plack-Middleware-MethodOverride
arch: src
version: 0.20
epoch: 0
release: 10.fc33
summary: Override REST methods to Plack apps via POST
url: https://metacpan.org/release/Plack-Middleware-MethodOverride
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-MethodOverride-0.20-10.fc33.src.rpm
checksum_type: sha256
description:
  This Plack middleware allows your apps to override any HTTP method over POST.
  Specifically, you can provide a query parameter named "x-tunneled-method"
  or a header named "x-http-method-override" (as used by Google's APIs).
  Either way, the overriding works only via POST requests, not GET.


pkgId: 75e991e5b5a979828be17b453c5c63aea52d8b64b8d9bf3846a710c2a212fbaf
name: perl-Plack-Middleware-ReverseProxy
arch: src
version: 0.16
epoch: 0
release: 6.fc33
summary: Supports app to run as a reverse proxy back-end
url: https://metacpan.org/release/Plack-Middleware-ReverseProxy
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-ReverseProxy-0.16-6.fc33.src.rpm
checksum_type: sha256
description:
  Plack::Middleware::ReverseProxy resets some HTTP headers, which changed by
  reverse-proxy. You can specify the reverse proxy address and stop fake
  requests using 'enable_if' directive in your app.psgi.


pkgId: 0d1c22e7ff7092bb3f01755b37245cea2d99ac55cb88f1dbad7c4a2b2f74efd5
name: perl-Plack-Middleware-Session
arch: src
version: 0.33
epoch: 0
release: 6.fc33
summary: Middleware for session management
url: http://metacpan.org/release/Plack-Middleware-Session
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-Session-0.33-6.fc33.src.rpm
checksum_type: sha256
description:
  This is a Plack Middleware component for session management. By default it
  will use cookies to keep session state and store data in memory. This
  distribution also comes with other state and store solutions.


pkgId: 2136888f8066b292572b82f03bd9e0b03b060f3f9bbe3f64e8ee1fbf175e92e9
name: perl-Plack-Middleware-Test-StashWarnings
arch: src
version: 0.08
epoch: 0
release: 21.fc33
summary: Test your application's warnings
url: https://metacpan.org/release/Plack-Middleware-Test-StashWarnings
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Middleware-Test-StashWarnings-0.08-21.fc33.src.rpm
checksum_type: sha256
description:
  Plack::Middleware::Test::StashWarnings is a Plack middleware component to
  record warnings generated by your application so that you can test them to
  make sure your application complains about the right things.


pkgId: 847321334cc57468a0bda276ea043deda25dfb104665ba7e55ad1f97b1b64f83
name: perl-Plack-Test-Agent
arch: src
version: 1.4
epoch: 0
release: 7.fc33
summary: Object-oriented interface for testing PSGI applications
url: https://metacpan.org/release/Plack-Test-Agent
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Test-Agent-1.4-7.fc33.src.rpm
checksum_type: sha256
description:
  Plack::Test::Agent is an object-oriented interface to test PSGI applications.
  It can perform GET and POST requests against PSGI applications either in
  process or over HTTP through a Plack::Handler compatible backend.


pkgId: 8e7be7165f07ae28b578467975adf2181350c59dbe362ab8da3d6c2ffe74525c
name: perl-Plack-Test-ExternalServer
arch: src
version: 0.02
epoch: 0
release: 20.fc33
summary: Run HTTP tests on external live servers
url: https://metacpan.org/release/Plack-Test-ExternalServer
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Plack-Test-ExternalServer-0.02-20.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to run your Plack::Test tests against an external
  server instead of just against a local application through either mocked
  HTTP or a locally spawned server.


pkgId: 497eba88bd929a0def2dd9b6a4accc8867174289e7ba9ca92376446760883bc3
name: perl-Pod-Abstract
arch: src
version: 0.20
epoch: 0
release: 29.fc33
summary: Abstract document tree for Perl POD documents
url: https://metacpan.org/release/Pod-Abstract
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-03.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Abstract-0.20-29.fc33.src.rpm
checksum_type: sha256
description:
  POD::Abstract provides a means to load a POD (or POD compatible) document
  without direct reference to it's syntax, and perform manipulations on the
  abstract syntax tree.


pkgId: ef55833b9316e52ea98a341478d48c74586dc11c39ff6e2d2b83915f67adb30e
name: perl-Pod-Checker
arch: src
version: 1.73
epoch: 4
release: 457.fc33
summary: Check POD documents for syntax errors
url: https://metacpan.org/release/Pod-Checker
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Checker-1.73-457.fc33.src.rpm
checksum_type: sha256
description:
  Module and tools to verify POD documentation contents for compliance with the
  Plain Old Documentation format specifications.


pkgId: 66121a9e5eae3c3adbd56dea18c13921c24e29a0f838c7a5b982c50ad9cf34a9
name: perl-Pod-Constants
arch: src
version: 0.19
epoch: 0
release: 15.fc33
summary: Include constants from POD
url: https://metacpan.org/release/Pod-Constants
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Constants-0.19-15.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Constants allows you to extract data from your POD at run-time, meaning
  you can do things like declare constants in POD and not have to update two
  places at once every time you make a change.


pkgId: 699a1170c5d9bdb189f1a3a85b9fbce9a378e00141916f73367c2422fc9dc037
name: perl-Pod-Coverage
arch: src
version: 0.23
epoch: 0
release: 22.fc33
summary: Checks if the documentation of a module is comprehensive
url: https://metacpan.org/release/Pod-Coverage
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Coverage-0.23-22.fc33.src.rpm
checksum_type: sha256
description:
  Developers hate writing documentation.  They'd hate it even more if their
  computer tattled on them, but maybe they'll be even more thankful in the
  long run.  Even if not, perlmodstyle tells you to, so you must obey.

  This module provides a mechanism for determining if the pod for a given
  module is comprehensive.


pkgId: 24371e9e4392447feacf085b8fac3f8a9156e880c95af206c4513bbe0082795d
name: perl-Pod-Coverage-Moose
arch: src
version: 0.07
epoch: 0
release: 16.fc33
summary: Pod::Coverage extension for Moose
url: https://metacpan.org/release/Pod-Coverage-Moose
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Coverage-Moose-0.07-16.fc33.src.rpm
checksum_type: sha256
description:
  When using Pod::Coverage in combination with Moose, it will report any
  method imported from a Role. This is especially bad when used in
  combination with Test::Pod::Coverage, since it takes away its ease of use.


pkgId: a45b108e1f9a4f47995a315c1795b46bde4a6df0ca4549940590613412eb1dd8
name: perl-Pod-Coverage-TrustPod
arch: src
version: 0.100005
epoch: 0
release: 10.fc33
summary: Allow a module's pod to contain Pod::Coverage hints
url: https://metacpan.org/release/Pod-Coverage-TrustPod
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Coverage-TrustPod-0.100005-10.fc33.src.rpm
checksum_type: sha256
description:
  This is a Pod::Coverage subclass (actually, a subclass of
  Pod::Coverage::CountParents) that allows the POD itself to declare certain
  symbol names trusted.


pkgId: 9e6999f3d13fa9cc74403b8be8e94011c08c9d31fb9475cedc9c6286461d111c
name: perl-Pod-Elemental
arch: src
version: 0.103005
epoch: 0
release: 4.fc33
summary: Work with nestable Pod elements
url: https://metacpan.org/release/Pod-Elemental
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Elemental-0.103005-4.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Elemental is a system for treating a Pod (plain old documentation)
  documents as trees of elements. This model may be familiar from many other
  document systems, especially the HTML DOM. Pod::Elemental's document object
  model is much less sophisticated than the HTML DOM, but still makes a lot
  of document transformations easy.


pkgId: 1b6396198b1407eae75d6cbaec3df5f598ef638b657075003e23f53b78cc900a
name: perl-Pod-Elemental-PerlMunger
arch: src
version: 0.200006
epoch: 0
release: 12.fc33
summary: Take a string of Perl and rewrite its documentation
url: https://metacpan.org/release/Pod-Elemental-PerlMunger
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Elemental-PerlMunger-0.200006-12.fc33.src.rpm
checksum_type: sha256
description:
  This Moose role is to be included in classes that rewrite the documentation of
  a Perl document, stripping out all the POD, munging it, and replacing it into
  the Perl.


pkgId: da17ef17b1790d4821d0383abdb7366806d4ed4933fd5a68b318f0e9b542a94e
name: perl-Pod-Eventual
arch: src
version: 0.094001
epoch: 0
release: 18.fc33
summary: Read a POD document as a series of trivial events
url: https://metacpan.org/release/Pod-Eventual
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-32.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Eventual-0.094001-18.fc33.src.rpm
checksum_type: sha256
description:
  POD is a pretty simple format to write, but it can be a big pain to deal with
  reading it and doing anything useful with it. Most existing POD parsers care
  about semantics, like whether a =item occurred after an =over but before a
  back, figuring out how to link a L<>, and other things like that.

  Pod::Eventual is much less ambitious and much more stupid. Fortunately, stupid
  is often better (that's what I keep telling myself, anyway).

  Pod::Eventual reads line-based input and produces events describing each POD
  paragraph or directive it finds. Once complete events are immediately passed to
  the handle_event method. This method should be implemented by Pod::Eventual
  sub-classes. If it isn't, Pod::Eventual's own handle_event will be called, and
  will raise an exception.


pkgId: 40967a3a9988525f489d0fea191225b66205514b0c155f3a530268ccea4de873
name: perl-Pod-LaTeX
arch: src
version: 0.61
epoch: 0
release: 311.fc33
summary: Convert POD data to formatted LaTeX
url: https://metacpan.org/release/Pod-LaTeX
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-LaTeX-0.61-311.fc33.src.rpm
checksum_type: sha256
description:
  Pod::LaTeX is a module to convert documentation in the POD format into
  LaTeX. A pod2latex replacement command is provided.


pkgId: 8f4523a50907baf08af9681e017d28c10c5b519c9f6ada789d4ac70cbb06e1d7
name: perl-Pod-Markdown-Github
arch: src
version: 0.04
epoch: 0
release: 7.fc33
summary: Convert POD to Github's specific markdown
url: https://metacpan.org/release/Pod-Markdown-Github
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Markdown-Github-0.04-7.fc33.src.rpm
checksum_type: sha256
description:
  Github flavored markdown allows for syntax highlighting using three
  backticks. This Perl module inherits from Pod::Markdown and adds those
  backticks and an optional language identifier.


pkgId: e79398b384e531d75119fdee43c47ec94618717c4847e11bfcd154e8ed001ace
name: perl-Pod-MinimumVersion
arch: src
version: 50
epoch: 0
release: 29.fc33
summary: Perl version for POD directives used
url: https://metacpan.org/release/Pod-MinimumVersion
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-MinimumVersion-50-29.fc33.src.rpm
checksum_type: sha256
description:
  Pod::MinimumVersion parses the POD in a Perl script, module, or document,
  and reports what version of Perl is required to process the directives in
  it with pod2man etc.


pkgId: fe2ee4f8627b399474840cbbc15640b2f5e29accd946ddc298a2709e61ea02f1
name: perl-Pod-POM
arch: src
version: 2.01
epoch: 0
release: 17.fc33
summary: Object-oriented interface to Perl POD documents
url: https://metacpan.org/release/Pod-POM
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-POM-2.01-17.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a parser to convert Pod documents into a simple
  object model form known hereafter as the Pod Object Model.  The object
  model is generated as a hierarchical tree of nodes, each of which
  represents a different element of the original document.  The tree can
  be walked manually and the nodes examined, printed or otherwise
  manipulated.  In addition, Pod::POM supports and provides view objects
  which can automatically traverse the tree, or section thereof, and
  generate an output representation in one form or another.


pkgId: 26250c313ebaf431d152760fa6cfaa2b455232fe7a30901f2b252a1f0d8cf5c5
name: perl-Pod-Parser
arch: src
version: 1.63
epoch: 0
release: 444.fc33
summary: Basic perl modules for handling Plain Old Documentation (POD)
url: https://metacpan.org/release/Pod-Parser
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Parser-1.63-444.fc33.src.rpm
checksum_type: sha256
description:
  This software distribution contains the packages for using Perl5 POD (Plain
  Old Documentation). See the "perlpod" and "perlsyn" manual pages from your
  Perl5 distribution for more information about POD.


pkgId: 17c3d6474887c7f0510846db4c1dd59047e7870558c8ca041608c7c20836fe01
name: perl-Pod-Perldoc
arch: src
version: 3.28.01
epoch: 0
release: 458.fc33
summary: Look up Perl documentation in Pod format
url: https://metacpan.org/release/Pod-Perldoc
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Perldoc-3.28.01-458.fc33.src.rpm
checksum_type: sha256
description:
  perldoc looks up a piece of documentation in POD format that is embedded
  in the perl installation tree or in a Perl script, and displays it via
  "groff -man | $PAGER". This is primarily used for the documentation for
  the Perl library modules.


pkgId: e4b8f11b5a2d140a095aac112aede6cb8e6b9dcbd9d33324eaf1aa8fbd75c8fa
name: perl-Pod-Plainer
arch: src
version: 1.04
epoch: 0
release: 16.fc33
summary: Perl extension for converting modern POD to old-style POD
url: https://metacpan.org/release/Pod-Plainer
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Plainer-1.04-16.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module takes POD with the new 'C<< .. >>' constructs and returns the
  older style with just 'C<>'. '<' and '>' are replaced by 'E<lt>' and 'E<gt>'.
  This can be used to preprocess POD before using tools which do not recognize
  the new style PODs.


pkgId: 8ee8978a016bc7655c5e3d30e397286521d8e7cd3d7067652de3d1f36a87d5a0
name: perl-Pod-PseudoPod
arch: src
version: 0.19
epoch: 0
release: 4.fc33
summary: Framework for extending the POD tags for book manuscripts
url: https://metacpan.org/release/Pod-PseudoPod
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-PseudoPod-0.19-4.fc33.src.rpm
checksum_type: sha256
description:
  PseudoPod is an extended set of Pod tags used for book manuscripts.
  Standard Pod doesn't have all the markup options you need to mark up files
  for publishing production. PseudoPod adds a few extra tags for footnotes,
  tables, sidebars, etc. For further information see Pod::PseudoPod::Tutorial.


pkgId: 6c71d65447c2dc11a3bc86afbab2ec30daad21c506562e1b69f12d4da2f938ca
name: perl-Pod-PseudoPod-LaTeX
arch: src
version: 1.20190729
epoch: 0
release: 4.fc33
summary: Pod::PseudoPod::LaTeX Perl module
url: https://metacpan.org/release/Pod-PseudoPod-LaTeX
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-PseudoPod-LaTeX-1.20190729-4.fc33.src.rpm
checksum_type: sha256
description:
  This module is a Pod::PseudoPod subclass, itself a Pod::Simple subclass. This
  means that this is a full-fledged POD parser.


pkgId: 5ef7f5edc7e158b2c4fde52fd5642bcf662db2dffbda7c6f39d794bab510be67
name: perl-Pod-Readme
arch: src
version: 1.2.3
epoch: 0
release: 7.fc33
summary: Intelligently generate a README file from POD
url: https://metacpan.org/release/Pod-Readme
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Readme-1.2.3-7.fc33.src.rpm
checksum_type: sha256
description:
  This module filters POD to generate a README file, by using POD commands to
  specify which parts are included or excluded from the README file.


pkgId: a7af900c26515399a01e4d0fbd192cc338529ed4882413cdf2c6508ef9dc229d
name: perl-Pod-Simple
arch: src
version: 3.40
epoch: 1
release: 458.fc33
summary: Framework for parsing POD documentation
url: https://metacpan.org/release/Pod-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Simple-3.40-458.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Simple is a Perl library for parsing text in the POD (plain old
  documentation) markup language that is typically used for writing
  documentation for Perl and for Perl modules.


pkgId: 647d187b8ce01f1399cac1febac610b1d3e4ae49ddbdfbb2782b9591df8ddd19
name: perl-Pod-Simple-Wiki
arch: src
version: 0.20
epoch: 0
release: 15.fc33
summary: Utility and perl classes for converting POD to Wiki text
url: https://metacpan.org/release/Pod-Simple-Wiki
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Simple-Wiki-0.20-15.fc33.src.rpm
checksum_type: sha256
description:
  The Pod::Simple::Wiki module is used for converting Pod text to Wiki text.
  It currently contains the following output filters: Confluence, Kwiki,
  Mediawiki, Moinmoin, Template, Tiddlywiki, Twiki and Usemod.


pkgId: 0d3d915af2b73429d362fbac760936acf3690ffb87351b82f6fd827a2a87e2e1
name: perl-Pod-Snippets
arch: src
version: 0.14
epoch: 0
release: 19.fc33
summary: Extract and reformat snippets of POD
url: https://metacpan.org/release/Pod-Snippets
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Snippets-0.14-19.fc33.src.rpm
checksum_type: sha256
description:
  This class is a very simple extension of Pod::Parser that extracts POD
  snippets from Perl code, and pretty-prints it so as to make it usable from
  other Perl code. As demonstrated above, Pod::Snippets is immediately useful
  to test-driven-development nutcases who want to put every single line of
  Perl code under test, including code that is in the POD (typically a
  SYNOPSIS section). There are other uses, such as storing a piece of
  information that is both human- and machine-readable (e.g. an XML schema)
  simultaneously as documentation and code.


pkgId: 29b0d620c3b0221fbae7c71a2a722e60d2a180ca773d35219f702df0cccb4af9
name: perl-Pod-Spell
arch: src
version: 1.20
epoch: 0
release: 17.fc33
summary: A formatter for spell-checking POD
url: https://metacpan.org/release/Pod-Spell
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Spell-1.20-17.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Spell is a Pod formatter whose output is good for spell-checking.
  Pod::Spell rather like Pod::Text, except that it doesn't put much
  effort into actual formatting, and it suppresses things that look like
  Perl symbols or Perl jargon (so that your spell-checking program won't
  complain about mystery words like "$thing" or "Foo::Bar" or "hashref").


pkgId: c35beed63faef523e367f617d2089ef0c215ee5b9c807d8560eb8ab6d9908d14
name: perl-Pod-Spell-CommonMistakes
arch: src
version: 1.002
epoch: 0
release: 18.fc33
summary: Catches common typos in POD
url: https://metacpan.org/release/Pod-Spell-CommonMistakes
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Spell-CommonMistakes-1.002-18.fc33.src.rpm
checksum_type: sha256
description:
  This module looks for any typos in your POD. It differs from Pod::Spell or
  Test::Spelling because it uses a custom word list and doesn't use the system
  spellchecker. The idea for this came from the
  <http://wiki.debian.org/Teams/Lintian> code in Debian, thanks!


pkgId: e8594f34fc090cca52d2cd6ab042867ee37132274b1cde0b548d2cd10b19dd94
name: perl-Pod-Stripper
arch: src
version: 0.22
epoch: 0
release: 15.fc33
summary: Strip all pod, and output what's left
url: https://metacpan.org/release/Pod-Stripper
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Stripper-0.22-15.fc33.src.rpm
checksum_type: sha256
description:
  This be Pod::Stripper, a subclass of Pod::Parser. It parses perl files,
  stripping out the pod, and dumping the rest (presumably code) to wherever
  you point it to (like you do with Pod::Parser).


pkgId: 28a1145c8370413b2398e4d6dd9aef4ea0e325284436e259d56eadaa19d5ff93
name: perl-Pod-Tests
arch: src
version: 1.20
epoch: 0
release: 6.fc33
summary: Extract embedded tests and code examples from POD
url: https://metacpan.org/release/Pod-Tests
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Tests-1.20-6.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Tests extracts embedded tests and code examples from POD.
  pod2test convert embedded tests and code examples to .t files.


pkgId: 39adb63f3a51df28629d32b70bb2a7b867665763dda42aa561310f3679033304
name: perl-Pod-Tidy
arch: src
version: 0.10
epoch: 0
release: 16.fc33
summary: Reformatting Pod Processor
url: https://metacpan.org/release/Pod-Tidy
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Tidy-0.10-16.fc33.src.rpm
checksum_type: sha256
description:
  This module provides the heavy lifting needed by the podtidy utility
  although the API should be general enough that it can be used directly.

  podtidy processes a Pod document and attempts to tidy it's formatting.


pkgId: 7e1403e193d93f2ecbcaccf14fd9a3caacc735e00a3a8c5c0f7eb93c3aebc08f
name: perl-Pod-Usage
arch: src
version: 1.70
epoch: 4
release: 3.fc33
summary: Print a usage message from embedded POD documentation
url: https://metacpan.org/release/Pod-Usage
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Usage-1.70-3.fc33.src.rpm
checksum_type: sha256
description:
  pod2usage will print a usage message for the invoking script (using its
  embedded POD documentation) and then exit the script with the desired exit
  status. The usage message printed may have any one of three levels of
  "verboseness": If the verbose level is 0, then only a synopsis is printed.
  If the verbose level is 1, then the synopsis is printed along with a
  description (if present) of the command line options and arguments. If the
  verbose level is 2, then the entire manual page is printed.


pkgId: fdecbf973c69395153f849aae878dc03800dd2dc49804afef99dd922f9e8f842
name: perl-Pod-Weaver
arch: src
version: 4.015
epoch: 0
release: 12.fc33
summary: Weave together a POD document from an outline
url: https://metacpan.org/release/Pod-Weaver
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Weaver-4.015-12.fc33.src.rpm
checksum_type: sha256
description:
  Pod::Weaver is a system for building POD documents from templates.
  It doesn't perform simple text substitution, but instead builds
  a Pod::Elemental::Document. Its plugins sketch out a series of sections
  that will be produced based on an existing POD document or other
  provided information.


pkgId: 0e821581021a00607c03ef0fe43dcafa36b17a86a35af1991737d09aa856aafe
name: perl-Pod-Wrap
arch: src
version: 0.01
epoch: 0
release: 15.fc33
summary: Wrap pod paragraphs, leaving verbatim text and code alone
url: https://metacpan.org/release/Pod-Wrap
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Pod-Wrap-0.01-15.fc33.src.rpm
checksum_type: sha256
description:
  This is a Pod::Parser subclass, based on Pod::Stripper. It parses perl
  files, wrapping pod text, and leaving everything else intact. It prints
  it's output to wherever you point it to (like you do with Pod::Parser (and
  Pod::Stripper)).


pkgId: 71ec666af629e49db453cb46fe2c14dbe0d432b9cb9fb7f037b2827912409b90
name: perl-Prima
arch: src
version: 1.59
epoch: 0
release: 3.fc33
summary: Perl graphic toolkit
url: https://metacpan.org/release/Prima
rpm_license: BSD and MIT and TCL and ImageMagick and LGPLv2+ and AGPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Prima-1.59-3.fc33.src.rpm
checksum_type: sha256
description:
  Prima is a general purpose extensible graphical user interface toolkit with
  a rich set of standard widgets and an emphasis on 2D image processing tasks.
  A Perl program using PRIMA looks and behaves identically on X, Win32.


pkgId: 8bbbf39f05f5c039f32d2637f6e8da7d4126a9d19bfdfd4b661256748554fc1a
name: perl-Probe-Perl
arch: src
version: 0.03
epoch: 0
release: 19.fc33
summary: Information about the currently running perl
url: https://metacpan.org/release/Probe-Perl
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Probe-Perl-0.03-19.fc33.src.rpm
checksum_type: sha256
description:
  This module provides methods for obtaining information about the currently
  running perl interpreter. It originally began life as code in the
  Module::Build project, but has been externalized here for general use.


pkgId: 895b6f84ea40aed0be5489320088e1d8f0b3db2a16e48e14da05a9d99b516028
name: perl-Proc-Daemon
arch: src
version: 0.23
epoch: 0
release: 15.fc33
summary: Run Perl program as a daemon process
url: https://metacpan.org/release/Proc-Daemon
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Daemon-0.23-15.fc33.src.rpm
checksum_type: sha256
description:
  This is version 0.23 of Proc::Daemon

  This module contains the routine Init which can be called by a Perl
  program to initialize itself as a daemon. A daemon is a process that
  runs in the background with no controlling terminal. Generally servers
  (like FTP and HTTP servers) run as daemon processes.


pkgId: bd90753b5daa24a5318291f4354f0f13026f284babef265aa32bb569eb4695ca
name: perl-Proc-Fork
arch: src
version: 0.806
epoch: 0
release: 7.fc33
summary: Simple, intuitive interface to the fork() system call
url: https://metacpan.org/release/Proc-Fork
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Fork-0.806-7.fc33.src.rpm
checksum_type: sha256
description:
  This module provides an intuitive, Perl-ish way to write forking
  programs by letting you use blocks to illustrate which code section
  executes in which fork. The code for the parent, child, retry handler
  and error handler are grouped together in a "fork block". The clauses
  may appear in any order, but they must be consecutive (without any other
  statements in between).


pkgId: a6f3a5e055e2144747a39b45b546b310ccf4918fb77db73f0abb08b13acdbd0d
name: perl-Proc-Guard
arch: src
version: 0.07
epoch: 0
release: 17.fc33
summary: Process runner with RAII pattern
url: https://metacpan.org/release/Proc-Guard
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Guard-0.07-17.fc33.src.rpm
checksum_type: sha256
description:
  Proc::Guard runs process, and destroys it when the perl script exits.
  This is useful for testing code working with server process.


pkgId: df5b919302a07b98439e778d57c37fd224304b837dfbd1835b6c08c70946df12
name: perl-Proc-InvokeEditor
arch: src
version: 1.13
epoch: 0
release: 10.fc33
summary: Perl extension for starting a text editor
url: https://metacpan.org/release/Proc-InvokeEditor
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-InvokeEditor-1.13-10.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides the ability to supply some text to an external text
  editor, have it edited by the user, and retrieve the results.


pkgId: 3da0f855a9183554a0b98b9fee346fa43cf927ebde7433eeefd496647bb978ce
name: perl-Proc-PID-File
arch: src
version: 1.29
epoch: 0
release: 8.fc33
summary: Module to manage process id files
url: https://metacpan.org/release/Proc-PID-File
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-PID-File-1.29-8.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module is useful for writers of daemons and other processes that
  need to tell whether they are already running, in order to prevent multiple
  process instances.  The module accomplishes this via *nix-style I<pidfiles>,
  which are files that store a process identifier.


pkgId: d7a3305482a2108b928b198203968f865859b0e7b4ab3011aaa05a26bf3be76e
name: perl-Proc-Queue
arch: src
version: 1.23
epoch: 0
release: 20.fc33
summary: Limit the number of child processes running
url: https://metacpan.org/release/Proc-Queue
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Queue-1.23-20.fc33.src.rpm
checksum_type: sha256
description:
  This module lets you parallelise a perl program using the fork, exit, wait
  and waitpid calls as usual but without taking care of creating too many
  processes and overloading the machine.


pkgId: 1bb19d11c0766b0c2622fede43dac1e28636aaa570dc43667525d56eafc19ff3
name: perl-Proc-Simple
arch: src
version: 1.32
epoch: 0
release: 14.fc33
summary: Launch and control background processes
url: https://metacpan.org/release/Proc-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Simple-1.32-14.fc33.src.rpm
checksum_type: sha256
description:
  The Proc::Simple package provides objects mimicking real-life processes from
  a user's point of view. Either external programs or perl subroutines can be
  launched and controlled as processes in the background.


pkgId: 4deb6d566f9c99b498fcc0ea8cf770b14b86da2de5cadb76dfeca2e2060ed564
name: perl-Proc-SyncExec
arch: src
version: 1.01
epoch: 0
release: 26.fc33
summary: Spawn processes but report exec() errors
url: https://metacpan.org/release/Proc-SyncExec
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-SyncExec-1.01-26.fc33.src.rpm
checksum_type: sha256
description:
  This module contains functions for synchronized process spawning with full
  error return. If the child's exec() call fails the reason for the failure
  is reported back to the parent.


pkgId: d1117cb7224ab164e72faf86464aa7260ac2be7bfe0176a7397cc97adb3b5d82
name: perl-Proc-Terminator
arch: src
version: 0.05
epoch: 0
release: 15.fc33
summary: Conveniently terminate processes
url: https://metacpan.org/release/Proc-Terminator
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Terminator-0.05-15.fc33.src.rpm
checksum_type: sha256
description:
  Proc::Terminator provides a convenient way to kill a process, often useful
  in utility and startup functions which need to ensure the death of an
  external process.


pkgId: babf33b7861dff955250b0084e4ccb3432c9795cfada280c1c53e9aa30dc71d3
name: perl-Proc-Wait3
arch: src
version: 0.05
epoch: 0
release: 18.fc33
summary: Perl extension for wait3 system call
url: https://metacpan.org/release/Proc-Wait3
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Proc-Wait3-0.05-18.fc33.src.rpm
checksum_type: sha256
description:
  If any child processes have exited, this call will "reap" the zombies
  similar to the perl "wait" function.


pkgId: 6d48f8ab4b2d9a8a4a60dc01bed9a7874bd3af3cf1070fd98499d542fdecab2c
name: perl-Promises
arch: src
version: 1.04
epoch: 0
release: 4.fc33
summary: Implementation of Promises in Perl
url: https://metacpan.org/release/Promises
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Promises-1.04-4.fc33.src.rpm
checksum_type: sha256
description:
  This module is an implementation of the "Promise/A+" pattern for
  asynchronous programming. Promises are meant to be a way to better deal
  with the resulting callback spaghetti that can often result in
  asynchronous programs.


pkgId: eb77a2d0a3ad841cf80f578cd508ef4845bc2e820b0a30b346f781492ae1a652
name: perl-Protocol-HTTP2
arch: src
version: 1.10
epoch: 0
release: 4.fc33
summary: HTTP/2 protocol implementation (RFC 7540)
url: https://metacpan.org/release/Protocol-HTTP2
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Protocol-HTTP2-1.10-4.fc33.src.rpm
checksum_type: sha256
description:
  Protocol::HTTP2 is Perl HTTP/2 protocol implementation (RFC 7540) with
  stateful decoders/encoders of HTTP/2 frames. You may use this module to
  implement your own HTTP/2 client/server/intermediate on top of your favorite
  event loop over plain or TLS socket.


pkgId: 9623845024f113c7ec1ac79246e4ea430fbd8e9cd7d3125b36cee4e8ff2a17a7
name: perl-Protocol-WebSocket
arch: src
version: 0.26
epoch: 0
release: 6.fc33
summary: WebSocket protocol
url: https://metacpan.org/release/Protocol-WebSocket
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Protocol-WebSocket-0.26-6.fc33.src.rpm
checksum_type: sha256
description:
  Client/server WebSocket message and frame parser/constructor. This module
  does not provide a WebSocket server or client, but is made for using in
  http servers or clients to provide WebSocket support.


pkgId: 47f5464395ad76c28f345728d4cfe9d52762307da2a3323e5fb0f17cec745ebd
name: perl-QWizard
arch: src
version: 3.15
epoch: 0
release: 33.fc33
summary: A very portable graphical question and answer wizard system
url: https://metacpan.org/release/QWizard
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-QWizard-3.15-33.fc33.src.rpm
checksum_type: sha256
description:
  The QWizard module allows script authors to concentrate on the
  content of the forms they want their users to fill in without
  worrying about the display.  It allows "Question Wizard" like
  interfaces to be very easily created and the results of the input
  easily acted upon.  Scripts written which are entirely based on
  QWizard inputs are able to be run from the command line which will
  show a Gtk2, Tk window or as a ReadLine interactive session or as a
  CGI script without modification.  Script writers do not need to know
  which interface is being used to display the resulting form(s) as it
  should be transparent to the script itself.

  Other wizard interfaces exist for perl, but this one strives very
  hard to be both extensible and easy to code with requiring as little
  work by script authors as possible.  It is also one of the only ones
  that supports both web environments and windowing environments
  without code modification required by the script author.


pkgId: 901efd35958f4adb261e7e2aec014f3582ac4abc9e09ffbfc991448ce2ae900a
name: perl-Queue-DBI
arch: src
version: 2.7.0
epoch: 0
release: 12.fc33
summary: A queueing module with an emphasis on safety, using DBI as a storage system
url: https://metacpan.org/release/Queue-DBI
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Queue-DBI-2.7.0-12.fc33.src.rpm
checksum_type: sha256
description:
  Queue-DBI allows you to safely use a queueing system by preventing
  backtracking, infinite loops and data loss. An emphasis of this distribution
  is to provide an extremely reliable dequeueing mechanism without having to
  use transactions.


pkgId: 576877d29c9794c2640c9a444e1b37bd627a6611310c8983820bdd94267e040e
name: perl-RDF-NS
arch: src
version: 20190227
epoch: 0
release: 6.fc33
summary: Popular RDF name space prefixes from prefix.cc
url: https://metacpan.org/release/RDF-NS
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-NS-20190227-6.fc33.src.rpm
checksum_type: sha256
description:
  Hard-coding URI name spaces and prefixes for RDF applications is neither
  fun nor maintainable. In the end we all use more or less the same
  prefix definitions, as collected at <http://prefix.cc/>. This Perl module
  includes all these prefixes as defined at specific snapshots in time.


pkgId: b91ba1fae3a5507f2249ffe48502ec23b274b02b154e8b1884516f1d79702ccd
name: perl-RDF-NS-Curated
arch: src
version: 1.004
epoch: 0
release: 4.fc33
summary: Curated set of RDF prefixes
url: https://metacpan.org/release/RDF-NS-Curated
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-NS-Curated-1.004-4.fc33.src.rpm
checksum_type: sha256
description:
  This contains a list of prefix and URI pairs that are commonly used in RDF.
  The intention is that prefixes in this list can be safely used in code that
  has a long lifetime. The list has been derived mostly from W3C standards
  documents, but also some popularity lists.


pkgId: 24990faa369c4cebbfe599f358499af673101bf7c6934fadecfd5764ef9b7b34
name: perl-RDF-Prefixes
arch: src
version: 0.005
epoch: 0
release: 12.fc33
summary: Simple way to turn URIs into QNames
url: https://metacpan.org/release/RDF-Prefixes
rpm_license: (GPL+ or Artistic) and CC-BY-SA and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-Prefixes-0.005-12.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module generates pretty prefixes, reducing
  "http://purl.org/dc/terms" to "dc" rather than something too generic like like
  "ns01", and provides a context for keeping track of name spaces already used,
  so that when "http://purl.org/dc/elements/1.1/" is encountered, it won't stomp
  on the previous definition of "dc".


pkgId: 0dd610e1b82cc18f7f2134d1caab54e34bab2481b238ce60d1d21b90a73a2594
name: perl-RDF-Query
arch: src
version: 2.918
epoch: 0
release: 14.fc33
summary: SPARQL 1.1 Query and Update implementation for RDF::Trine
url: https://metacpan.org/release/RDF-Query
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-Query-2.918-14.fc33.src.rpm
checksum_type: sha256
description:
  RDF::Query allows SPARQL and RDQL queries to be run against an RDF model,
  returning rows of matching results.


pkgId: 7413dccb43c7ba97be7ca5d44a4bfd8a1e4b4efc76006152872d799e41295dba
name: perl-RDF-TriN3
arch: src
version: 0.206
epoch: 0
release: 13.fc33
summary: Notation 3 extensions for RDF::Trine
url: https://metacpan.org/release/RDF-TriN3
rpm_license: (GPL+ or Artistic) and CC-BY-SA
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-TriN3-0.206-13.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module extends RDF::Trine. It adds Notation 3 parser, serializer and
  it provides subclass for representing Notation 3 formulae literals.


pkgId: 79e360d6162454eb259323a966367cd82ab789b1ddf5718380f73d57ede68eb5
name: perl-RDF-Trine
arch: src
version: 1.019
epoch: 0
release: 11.fc33
summary: RDF Framework for Perl
url: https://metacpan.org/release/RDF-Trine
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-Trine-1.019-11.fc33.src.rpm
checksum_type: sha256
description:
  RDF::Trine provides an Resource Descriptive Framework (RDF) with an
  emphasis on extensibility, API stability, and the presence of a test suite.

  Support for MySQL, PosgreSQL, Redland, Redis, and SQLite is delivered by
  separate packages (e.g. perl-RDF-Trine-mysql).


pkgId: 972ada00ba4dd6cadb1148309bfd5f844ca7a2d56d2372876b344fd05a3ce573
name: perl-RDF-TrineX-Compatibility-Attean
arch: src
version: 0.100
epoch: 0
release: 4.fc33
summary: Compatibility layer between Attean and RDF::Trine
url: https://metacpan.org/release/RDF-TrineX-Compatibility-Attean
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RDF-TrineX-Compatibility-Attean-0.100-4.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module adds a support for the methods of certain Attean classes to
  an RDF::Trine framework.


pkgId: cc546c4fa886a2d1a0d95e227cb355dc5c4948f2395cc0b7a092dc34c1f00e50
name: perl-RPC-XML
arch: src
version: 0.80
epoch: 0
release: 17.fc33
summary: Set of classes for core data, message and XML handling
url: https://metacpan.org/release/RPC-XML
rpm_license: Artistic 2.0 or LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RPC-XML-0.80-17.fc33.src.rpm
checksum_type: sha256
description:
  The RPC::XML package is an implementation of XML-RPC. The module provides
  classes for sample client and server implementations, a server designed as an
  Apache location-handler, and a suite of data-manipulation classes that are
  used by them.


pkgId: 8b714f49704e15b0f18a4b748b2d670b38536508598e3772028bff4a42201b9b
name: perl-RPM-Specfile
arch: src
version: 1.51
epoch: 0
release: 38.fc33
summary: Perl extension for creating RPM specfiles
url: https://metacpan.org/release/RPM-Specfile
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RPM-Specfile-1.51-38.fc33.src.rpm
checksum_type: sha256
description:
  This is a simple module for creation of RPM Spec files. Most of the methods
  in this module are the same name as the RPM Spec file element they
  represent but in lower case.


pkgId: 6fe8efa666a3a895603f8b2622fc3bf206c00f86aa11adeed4dab9ce51d8fd84
name: perl-RPM-VersionCompare
arch: src
version: 0.1.1
epoch: 0
release: 36.fc33
summary: Compare RPM version strings
url: http://ppisar.fedorapeople.org/RPM-VersionCompare/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RPM-VersionCompare-0.1.1-36.fc33.src.rpm
checksum_type: sha256
description:
  This module provides functions to compare RPM version strings. No function
  is exported by default. If possible, calls are passed to native librpm
  library. Otherwise Python extension provided with RPM sources is re-
  -implemented.


pkgId: fc12dc95fdd64985325cfc08448d01070e63741dac3ec9f9ac2cc510c0e919c7
name: perl-RPM2
arch: src
version: 1.4
epoch: 0
release: 13.fc33
summary: Perl bindings for the RPM Package Manager API
url: https://metacpan.org/release/RPM2
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RPM2-1.4-13.fc33.src.rpm
checksum_type: sha256
description:
  The RPM2 module provides an object-oriented interface to querying both the
  installed RPM database as well as files on the filesystem, providing Perl
  bindings for the RPM Package Manager API.


pkgId: dcb4d1ff64d8e8d0ec4eeb8f30c270376c5172cd362937f2525d17b7df64174f
name: perl-RRD-Simple
arch: src
version: 1.44
epoch: 0
release: 39.fc33
summary: Simple interface to create and store data in RRD files
url: https://metacpan.org/release/RRD-Simple
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RRD-Simple-1.44-39.fc33.src.rpm
checksum_type: sha256
description:
  RRD::Simple provides a simple interface to RRDTool's RRDs module. This module
  does not currently offer the fetch method that is available in the RRDs
  module. It does, however, create RRD files with a sensible set of default RRA
  Round Robin Archive) definitions, and can dynamically add new data source
  names to an existing RRD file.

  This module is ideal for quick and simple storage of data within an RRD file
  if you do not need to, nor want to, bother defining custom RRA definitions.


pkgId: e7f32c99c05d5e4182b291f8899f8d9f981ceb45d36991cc3d2319adad97d23d
name: perl-RT-Client-REST
arch: src
version: 0.60
epoch: 0
release: 3.fc33
summary: Talk to RT using REST protocol
url: https://metacpan.org/release/RT-Client-REST
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-RT-Client-REST-0.60-3.fc33.src.rpm
checksum_type: sha256
description:
  RT::Client::REST is a set of object-oriented Perl modules designed to make
  communicating with RT using REST protocol easy. Most of the features have been
  implemented and tested with rt 3.6.0 and later.


pkgId: 6a5b8c746283aa367567fc3fc3794c2c682dc56fd217b45830a95d5845d55876
name: perl-Razor-Agent
arch: src
version: 2.85
epoch: 0
release: 39.fc33
summary: Use a Razor catalogue server to filter spam messages
url: http://razor.sourceforge.net/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Razor-Agent-2.85-39.fc33.src.rpm
checksum_type: sha256
description:
  Vipul's Razor is a distributed, collaborative, spam detection and
  filtering network. Razor establishes a distributed and constantly
  updating catalogue of spam in propagation. This catalogue is used
  by clients to filter out known spam. On receiving a spam, a Razor
  Reporting Agent (run by an end-user or a troll box) calculates and
  submits a 20-character unique identification of the spam (a SHA
  Digest) to its closest Razor Catalogue Server. The Catalogue Server
  echos this signature to other trusted servers after storing it in its
  database. Prior to manual processing or transport-level reception,
  Razor Filtering Agents (end-users and MTAs) check their incoming mail
  against a Catalogue Server and filter out or deny transport in case of
  a signature match. Catalogued spam, once identified and reported by
  a Reporting Agent, can be blocked out by the rest of the Filtering
  Agents on the network.


pkgId: 6e530ebb9bdb4704c3a90efcd722753ce08e70326c76c69090585308441bde76
name: perl-Readonly
arch: src
version: 2.05
epoch: 0
release: 13.fc33
summary: Facility for creating read-only scalars, arrays, hashes
url: https://metacpan.org/release/Readonly
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Readonly-2.05-13.fc33.src.rpm
checksum_type: sha256
description:
  Readonly provides a facility for creating non-modifiable scalars,
  arrays, and hashes. Any attempt to modify a Readonly variable throws
  an exception.

  Readonly:
  * Creates scalars, arrays (not lists), and hashes
  * Creates variables that look and work like native perl variables
  * Creates global or lexical variables
  * Works at run-time or compile-time
  * Works with deep or shallow data structures
  * Prevents reassignment of Readonly variables


pkgId: 874afe20cd37a9a6f562a08172b571cba7856a0007e96a6dfa30e30b743f7e8e
name: perl-ReadonlyX
arch: src
version: 1.04
epoch: 0
release: 10.fc33
summary: Faster facility for creating read-only scalars, arrays, hashes
url: https://metacpan.org/release/ReadonlyX/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ReadonlyX-1.04-10.fc33.src.rpm
checksum_type: sha256
description:
  ReadonlyX is a near-drop-in replacement for Readonly, the popular facility
  for creating non-modifiable variables. This is useful for configuration
  files, headers, etc. It can also be useful as a development and debugging
  tool for catching updates to variables that should not be changed.


pkgId: 316a46e47c39fccc1908d6bafbf8f8893af567bda2d58d364b3283bf0565e54a
name: perl-Reaper
arch: src
version: 1.00
epoch: 0
release: 28.fc33
summary: Support for reaping child processes via $SIG{CHLD}
url: https://metacpan.org/release/Reaper
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Reaper-1.00-28.fc33.src.rpm
checksum_type: sha256
description:
  perl has an annoying little problem with child processes -- well, it is not
  actually a problem specific to perl, but it is somewhat more difficult with
  perl: reaping child processes after they exit so they don't hang around as
  zombies forever, and doing it in a way that accurately captures the exit
  code of the child.


pkgId: 14b35b1c436035480e0b1ad83bd4ffa496d0de3ed76274423539ae2dcebb3f89
name: perl-Regexp-Assemble
arch: src
version: 0.38
epoch: 0
release: 11.fc33
summary: Assemble multiple Regular Expressions into a single RE
url: https://metacpan.org/release/Regexp-Assemble
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Assemble-0.38-11.fc33.src.rpm
checksum_type: sha256
description:
  Regexp::Assemble takes an arbitrary number of regular expressions and
  assembles them into a single regular expression (or RE) that matches all
  that the individual REs match.


pkgId: d448cd19cecfca0208441ffe3687496dd8aa185cff3f84eb953f8f8a7c2ee175
name: perl-Regexp-Assemble-Compressed
arch: src
version: 0.02
epoch: 0
release: 23.fc33
summary: Assemble more compressed Regular Expression
url: https://metacpan.org/release/Regexp-Assemble-Compressed
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Assemble-Compressed-0.02-23.fc33.src.rpm
checksum_type: sha256
description:
  Regexp::Assemble::Compressed is a subclass of Regexp::Assemble. It
  assembles more compressed regular expressions.


pkgId: 60d53218af75d004a4e554c5b0651d3d8fa39e527d33bd50318c1495b84bb1e1
name: perl-Regexp-Common-net-CIDR
arch: src
version: 0.03
epoch: 0
release: 16.fc33
summary: Provide patterns for CIDR blocks
url: https://metacpan.org/release/Regexp-Common-net-CIDR
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Common-net-CIDR-0.03-16.fc33.src.rpm
checksum_type: sha256
description:
  Patterns for CIDR blocks.

  Now only next IPv4 formats are supported:
    xxx.xxx/xx
    xxx.xxx.xxx/xx
    xxx.xxx.xxx.xxx/xx


pkgId: 62ef930c50d6a25def43bb773e3ca77b2a8d7655b528c410f5af2e04a0559edf
name: perl-Regexp-Grammars
arch: src
version: 1.057
epoch: 0
release: 3.fc33
summary: Add grammatical parsing features to perl regular expressions
url: https://metacpan.org/release/Regexp-Grammars
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Grammars-1.057-3.fc33.src.rpm
checksum_type: sha256
description:
  This module adds a small number of new regular expressions constructs that
  can be used to implement complete recursive-descent parsing.

  These constructs use the grammar patterns that were added to perl's
  regular expressions in perl 5.10.


pkgId: 151c5d6b990b9b8bce603cf69d6d782a0fa31b71f02b6e73ad79fe4265aebecf
name: perl-Regexp-IPv6
arch: src
version: 0.03
epoch: 0
release: 28.fc33
summary: Regular expression for IPv6 addresses
url: https://metacpan.org/release/Regexp-IPv6
rpm_license: GPLv2+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-IPv6-0.03-28.fc33.src.rpm
checksum_type: sha256
description:
  This module exports the $IPv6_re regular expression that matches any valid
  IPv6 address as described in "RFC 2373 - 2.2 Text Representation of
  Addresses" but ::. Any string not compliant with such RFC will be rejected.


pkgId: 1f9971567fcaab1e792dd803103b60a76f15a5d626d3613deef99cabc73ab2ef
name: perl-Regexp-Pattern-License
arch: src
version: 3.4.0
epoch: 0
release: 3.fc33
summary: Regular expressions for legal licenses
url: https://metacpan.org/release/String-Copyright
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Pattern-License-3.4.0-3.fc33.src.rpm
checksum_type: sha256
description:
  Regexp::Pattern::License provides a hash of regular expression patterns related
  to legal software licenses.


pkgId: 5147dc0b252e560d8907f34cbfafa03de483293eb01b46907452326ba81c02ed
name: perl-Regexp-Shellish
arch: src
version: 0.93
epoch: 0
release: 37.fc33
summary: Shell-like regular expressions
url: https://metacpan.org/release/Regexp-Shellish
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Shellish-0.93-37.fc33.src.rpm
checksum_type: sha256
description:
  Provides shell-like regular expressions. The wildcards provided are
  ?, * and **, where ** is like * but matches /. See "compile_shellish"
  for details.


pkgId: 997795916b8cd8041f8b06a53fff05eb41b1f02d6b7c30dd93a77a24e8abbcc1
name: perl-Regexp-Stringify
arch: src
version: 0.06
epoch: 0
release: 10.fc33
summary: Stringify a Regexp object
url: https://metacpan.org/release/Regexp-Stringify
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Stringify-0.06-10.fc33.src.rpm
checksum_type: sha256
description:
  This module is an alternative to Perl's default stringification of Regexp
  object and has some features/options, e.g. producing regexp string that is
  compatible with certain perl versions.


pkgId: 9b4279718b076ea49bee433eb5936e1ebe4da4b7a1f1feec934fb12b7054ff2e
name: perl-Regexp-Trie
arch: src
version: 0.02
epoch: 0
release: 7.fc33
summary: Build trie-ized regexp
url: https://metacpan.org/release/Regexp-Trie
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Regexp-Trie-0.02-7.fc33.src.rpm
checksum_type: sha256
description:
  This module is a faster but simpler version of Regexp::Assemble or
  Regexp::Optimizer. It builds a trie-ized regexp as above. This module is
  faster than Regexp::Assemble but you can only add literals:
  a+b is treated as a\+b, not "more than one a's followed by b".


pkgId: 950823c967c02946daf4c01f0631406546b0fc369c08c8e259b3ef90021c17a5
name: perl-Reply
arch: src
version: 0.42
epoch: 0
release: 13.fc33
summary: Plugin-based read-evaluate-print loop for Perl
url: https://metacpan.org/release/Reply
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Reply-0.42-13.fc33.src.rpm
checksum_type: sha256
description:
  Reply is a lightweight, extensible read-evaluate-print loop (REPL) for Perl.
  It is plugin-based (see Reply::Plugin), and through plugins supports many
  advanced features such as coloring and pretty printing, Readline support, and
  pluggable commands.


pkgId: e2059469984a00100b3e9bd4732a7780c65de4fc77f1fc97fe3651c2e065a237
name: perl-Retry
arch: src
version: 1.03
epoch: 0
release: 12.fc33
summary: Perl function wrapper providing exponential back-off and callbacks on failure
url: https://metacpan.org/release/Retry
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Retry-1.03-12.fc33.src.rpm
checksum_type: sha256
description:
  A one-feature module, this provides a method to wrap any function in
  automatic retry logic, with exponential back-off delays, and a callback
  for each time an attempt fails.


pkgId: 14833bb6c884f19f9b403dd7be7dd63c3e1997568c37f3d0dbd23b7ef0d1b07d
name: perl-Return-MultiLevel
arch: src
version: 0.05
epoch: 0
release: 12.fc33
summary: Return across multiple call levels
url: https://metacpan.org/release/Return-MultiLevel
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Return-MultiLevel-0.05-12.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a way to return immediately from a deeply nested call
  stack. This is similar to exceptions, but exceptions don't stop automatically
  at a target frame (and they can be caught by intermediate stack frames using
  eval). In other words, this is more like setjmp(3)/longjmp(3) than die.


pkgId: 811a1920b2ae79c7af1d4a419bd92896c4d0b991715c6c201113447e9903596c
name: perl-Return-Type
arch: src
version: 0.005
epoch: 0
release: 12.fc33
summary: Specify a return type for a function
url: https://metacpan.org/release/Return-Type
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Return-Type-0.005-12.fc33.src.rpm
checksum_type: sha256
description:
  Return::Type allows you to specify a return type for your subs. Type
  constraints from any Type::Tiny, MooseX::Types or MouseX::Types type
  library are supported.


pkgId: e79a8cd241ad497c18fcf2a1d5f63f6e963a55db9b6fbcc831d549896e98d33c
name: perl-Return-Value
arch: src
version: 1.666005
epoch: 0
release: 15.fc33
summary: Polymorphic Return Values
url: https://metacpan.org/release/Return-Value
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Return-Value-1.666005-15.fc33.src.rpm
checksum_type: sha256
description:
  This module provides polymorphic return values with a simple API that should
  get you what you're looking for in each context a return value is used in.


pkgId: 8d62e6dab4786fd5f351c95cb587ae95b08dd27ec1efeb1aa88c0d7c71c42ed4
name: perl-Role-Commons
arch: src
version: 0.104
epoch: 0
release: 6.fc33
summary: Roles that can be commonly used
url: https://metacpan.org/release/Role-Commons/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Role-Commons-0.104-6.fc33.src.rpm
checksum_type: sha256
description:
  Role-Commons is not yet another implementation of roles. It is a collection of
  generic, reusable roles that hopefully you will love to apply to your classes.
  These roles are built using Moo::Role, so automatically integrate into the
  Moose object system if you're using it, but they do not require Moose.


pkgId: 8b71fa9ce569651046cec18adbc4072f1c2b92cf58945a8e27d5c72748d63005
name: perl-Role-HasMessage
arch: src
version: 0.006
epoch: 0
release: 19.fc33
summary: Thing with a message method
url: https://metacpan.org/release/Role-HasMessage
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Role-HasMessage-0.006-19.fc33.src.rpm
checksum_type: sha256
description:
  This is another extremely simple role. A class that includes
  Role::HasMessage is promising to provide a message method that returns a
  string summarizing the message or event represented by the object. It does
  not provide any actual behavior.


pkgId: 09eea9f75d5fd0569642a8e4740aaacfde3d8a6e454305a92f5e897bf8f1f909
name: perl-Roman
arch: src
version: 1.24
epoch: 0
release: 15.fc33
summary: Functions for converting between Roman and Arabic numerals
url: https://metacpan.org/release/Roman
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Roman-1.24-15.fc33.src.rpm
checksum_type: sha256
description:
  This package provides some functions which help conversion of numeric
  notation between Roman and Arabic.


pkgId: 8eac99d054c06bbb18bb226b6ffe5c402148367529189297168b86c1252ffd40
name: perl-Rose-DB
arch: src
version: 0.783
epoch: 0
release: 4.fc33
summary: DBI wrapper and abstraction layer
url: https://metacpan.org/release/Rose-DB
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Rose-DB-0.783-4.fc33.src.rpm
checksum_type: sha256
description:
  Rose::DB is a wrapper and abstraction layer for DBI-related functionality.
  A Rose::DB object "has a" DBI object; it is not a subclass of DBI.


pkgId: 97878f33ff95d18c2e31421f0647a224c54f9566afa46dbfd229f2bef5521f2f
name: perl-Rose-DB-Object
arch: src
version: 0.819
epoch: 0
release: 3.fc33
summary: Extensible, high performance object-relational mapper (ORM)
url: https://metacpan.org/release/Rose-DB-Object
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Rose-DB-Object-0.819-3.fc33.src.rpm
checksum_type: sha256
description:
  Rose::DB::Object is a base class for objects that encapsulate a single row
  in a database table. Rose::DB::Object-derived objects are sometimes simply
  called "Rose::DB::Object objects" in this documentation for the sake of
  brevity, but be assured that derivation is the only reasonable way to use
  this class.


pkgId: 81c9ae9a5dab044776196ba59d06060d1c30f5c188becb7bfde9a0d2ba11ef45
name: perl-Rose-DateTime
arch: src
version: 0.540
epoch: 0
release: 20.fc33
summary: DateTime helper functions and objects
url: https://metacpan.org/release/Rose-DateTime
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Rose-DateTime-0.540-20.fc33.src.rpm
checksum_type: sha256
description:
  The Rose::DateTime::* modules provide a few convenience functions and
  objects for use with DateTime dates.


pkgId: 661cbffdaf07a8bd0c40b678d4ec9297265c15780e737750885f33d0fb6583a7
name: perl-Rose-Object
arch: src
version: 0.860
epoch: 0
release: 21.fc33
summary: Simple object base class
url: https://metacpan.org/release/Rose-Object
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Rose-Object-0.860-21.fc33.src.rpm
checksum_type: sha256
description:
  Rose::Object is a generic object base class. It provides very little
  functionality, but a healthy dose of convention.


pkgId: 49b997cf5ebf55fa0f34b1811d684c6b86b0d42296b32d5d5ca29b172945655c
name: perl-SDL
arch: src
version: 2.548
epoch: 0
release: 9.fc33
summary: Simple DirectMedia Layer for Perl
url: http://sdl.perl.org/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SDL-2.548-9.fc33.src.rpm
checksum_type: sha256
description:
  SDL_perl is a package of Perl modules that provide both functional and
  object oriented interfaces to the Simple DirectMedia Layer for Perl 5. This
  package takes some liberties with the SDL API, and attempts to adhere to
  the spirit of both the SDL and Perl.


pkgId: 108c78dd09ea19cff3fdb1e4afcbc86796b484d01904ef9fb7e41bde7ba3b427
name: perl-SGML-Parser-OpenSP
arch: src
version: 0.994
epoch: 0
release: 37.fc33
summary: Perl interface to the OpenSP SGML and XML parser
url: https://metacpan.org/release/SGML-Parser-OpenSP
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SGML-Parser-OpenSP-0.994-37.fc33.src.rpm
checksum_type: sha256
description:
  SGML::Parser::OpenSP provides a native Perl interface, written in C++
  and XS, to the OpenSP SGML and XML parser.


pkgId: bfa11924f9cf4bb13efd37e2045d1441e1e32ae0a73cce67e7e74cbce71874a8
name: perl-SGMLSpm
arch: src
version: 1.03ii
epoch: 0
release: 51.fc33
summary: Perl library for parsing the output of nsgmls
url: https://metacpan.org/release/SGMLSpm
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SGMLSpm-1.03ii-51.fc33.src.rpm
checksum_type: sha256
description:
  Perl programs can use the SGMLSpm module to help convert SGML, HTML or XML
  documents into new formats.


pkgId: 46000801dbd645ee31a1fea24929ea6af20c94527eeddc7bcbb25b75758cc026
name: perl-SNMP_Session
arch: src
version: 1.13
epoch: 0
release: 25.fc33
summary: SNMP support for Perl 5
url: http://code.google.com/p/snmp-session/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SNMP_Session-1.13-25.fc33.src.rpm
checksum_type: sha256
description:
  Pure Perl SNMP v1 and SNMP v2 support for Perl 5.

  The SNMP operations currently supported are "get", "get-next", "get-bulk"
  and "set", as well as trap generation and reception.


pkgId: 8a77e7dfbaf3369023fce35d12d6a575cbe0ceacfff0eea888464b86eeb0fd0b
name: perl-SOAP-Lite
arch: src
version: 1.27
epoch: 0
release: 10.fc33
summary: Client and server side SOAP implementation
url: https://metacpan.org/release/SOAP-Lite
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SOAP-Lite-1.27-10.fc33.src.rpm
checksum_type: sha256
description:
  SOAP::Lite is a collection of Perl modules which provides a simple and
  lightweight interface to the Simple Object Access Protocol (SOAP) both on
  client and server side.


pkgId: bbdff0b7094fa309133fdb58154e1f4907841f7d051054619433c2708e280f13
name: perl-SOAP-WSDL
arch: src
version: 3.004
epoch: 0
release: 5.fc33
summary: Perl module for SOAP with WSDL support
url: https://metacpan.org/release/SOAP-WSDL
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SOAP-WSDL-3.004-5.fc33.src.rpm
checksum_type: sha256
description:
  SOAP::WSDL provides easy access to Web Services with WSDL descriptions.
  The WSDL is parsed and stored in memory. Your data is serialized according
  to the rules in the WSDL. The only transport mechanisms currently supported
  are HTTP and HTTPS.


pkgId: cf4087586d33640b0ec7c21673ce227db4b9a476f5fbe218cc48bea42b52f6cd
name: perl-SQL-Abstract-Classic
arch: src
version: 1.91
epoch: 0
release: 3.fc33
summary: Generate SQL from Perl data structures
url: https://metacpan.org/release/SQL-Abstract-Classic/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Abstract-Classic-1.91-3.fc33.src.rpm
checksum_type: sha256
description:
  This module was inspired by the excellent DBIx::Abstract. However, in using
  that module I found that what I really wanted to do was generate SQL, but
  still retain complete control over my statement handles and use the DBI
  interface. So, I set out to create an abstract SQL generation module.


pkgId: 85fe8df457a154aa3161589bbf4a9f3f0e1d09e349047b4e2e8d21341a7bb8eb
name: perl-SQL-Interp
arch: src
version: 1.26
epoch: 0
release: 3.fc33
summary: Interpolate Perl variables into SQL statements
url: https://metacpan.org/release/SQL-Interp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Interp-1.26-3.fc33.src.rpm
checksum_type: sha256
description:
  SQL::Interp converts a list of intermixed SQL fragments and variable
  references into a conventional SQL string and list of bind values suitable
  for passing onto DBI. This simple technique creates database calls that are
  simpler to create and easier to read, while still giving you full access to
  custom SQL.


pkgId: 98bfa026e628f60d139c491b91ab2e456b3e5f0e29682c12cf57c732073c394e
name: perl-SQL-Library
arch: src
version: 0.0.5
epoch: 0
release: 25.fc33
summary: Manage libraries of SQL easily
url: https://metacpan.org/release/SQL-Library
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Library-0.0.5-25.fc33.src.rpm
checksum_type: sha256
description:
  This is a perl module for managing simple SQL libraries stored in
  INI-like files.  It allows developers to maintain the SQL they require
  OUTSIDE of their perl code.


pkgId: a14da0a9f88473a6b620d383921656c90d5dec5eb7ad11baa21cf34fcf9e83f9
name: perl-SQL-ReservedWords
arch: src
version: 0.8
epoch: 0
release: 22.fc33
summary: Determine if words are reserved by ANSI/ISO SQL standard
url: https://metacpan.org/release/SQL-ReservedWords
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-ReservedWords-0.8-22.fc33.src.rpm
checksum_type: sha256
description:
  Determine if words are reserved by ANSI/ISO SQL standard.  There are also
  sub modules that determine if a particular database server reserves the word.


pkgId: 2d0b9fa64913555ffd7b57cb82fcb7edf6f4c1cebe30f059093da70d9bfbedb2
name: perl-SQL-Shell
arch: src
version: 1.17
epoch: 0
release: 6.fc33
summary: Command interpreter for DBI shells
url: https://metacpan.org/release/SQL-Shell
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Shell-1.17-6.fc33.src.rpm
checksum_type: sha256
description:
  SQL::Shell is a command-interpreter API for building shells and batch
  scripts. A command-line interface with readline support is included
  as part of the CPAN distribution. See SQL::Shell::Manual for a user
  guide. SQL::Shell offers features similar to the mysql or sql*plus
  client programs but is database independent.

  This package provides the backend SQL::Shell libraries.  For the
  command-line interpreter (sqlsh), please also install the sqlsh package.


pkgId: 9ec75e14fe74bb9b55ee1788e0b714ead697cd653ac3f7e6708cc3fb6ff910b3
name: perl-SQL-SplitStatement
arch: src
version: 1.00020
epoch: 0
release: 18.fc33
summary: Split any SQL code into atomic statements
url: https://metacpan.org/release/SQL-SplitStatement
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-02.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-SplitStatement-1.00020-18.fc33.src.rpm
checksum_type: sha256
description:
  This is a simple module which tries to split any SQL code, even including
  non-standard extensions (for the details see the "SUPPORTED DBMSs" section
  of the module documentation), into the atomic statements it is composed of.


pkgId: 543db9af62681f3deec53f5607d8cd4cfbb2d376f1815bf7bc36489aeb1f6a94
name: perl-SQL-Statement
arch: src
version: 1.412
epoch: 0
release: 16.fc33
summary: SQL parsing and processing engine
url: https://metacpan.org/release/SQL-Statement
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Statement-1.412-16.fc33.src.rpm
checksum_type: sha256
description:
  The SQL::Statement module implements a pure Perl SQL parsing and execution
  engine.  While it by no means implements full ANSI standard, it does support
  many features including column and table aliases, built-in and user-defined
  functions, implicit and explicit joins, complexly nested search conditions, and
  other features.


pkgId: 37c96d7630a3d5c873c7c46d58040112622c4600d7a0a6a8656eeed9474930a9
name: perl-SQL-Tokenizer
arch: src
version: 0.24
epoch: 0
release: 17.fc33
summary: Simple SQL tokenizer
url: https://metacpan.org/release/SQL-Tokenizer
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Tokenizer-0.24-17.fc33.src.rpm
checksum_type: sha256
description:
  SQL::Tokenizer is a simple tokenizer for SQL queries. It does not claim to
  be a parser or query verifier. It just creates sane tokens from a valid
  SQL query.


pkgId: 148e4606376b75dca23798ebe075b8fd634e008fccfef21a520a82efb8f11f2c
name: perl-SQL-Translator
arch: src
version: 1.61
epoch: 0
release: 3.fc33
summary: Manipulate structured data definitions (SQL and more)
url: https://metacpan.org/release/SQL-Translator
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SQL-Translator-1.61-3.fc33.src.rpm
checksum_type: sha256
description:
  SQL::Translator is a group of Perl modules that converts vendor-specific
  SQL table definitions into other formats, such as other vendor-specific
  SQL, ER diagrams, documentation (POD and HTML), XML, and Class::DBI
  classes.  The main focus of SQL::Translator is SQL, but parsers exist
  for other structured data formats, including Excel spreadsheets and
  arbitrarily delimited text files.  Through the separation of the code into
  parsers and producers with an object model in between, it’s possible to
  combine any parser with any producer, to plug in custom parsers or
  producers, or to manipulate the parsed data via the built-in object model.
  Presently only the definition parts of SQL are handled (CREATE, ALTER),
  not the manipulation of data (INSERT, UPDATE, DELETE).


pkgId: 73f8e1bb4fbb409bde703fadd19422a975bf297065c9731a23caca67faa2e82d
name: perl-SUPER
arch: src
version: 1.20190531
epoch: 0
release: 6.fc33
summary: Sane superclass method dispatcher
url: https://metacpan.org/release/SUPER
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SUPER-1.20190531-6.fc33.src.rpm
checksum_type: sha256
description:
  When subclassing a class, you occasionally want to dispatch control to the
  superclass - at least conditionally and temporarily. This module provides
  an easier, cleaner way for class methods to access their ancestor's
  implementation.


pkgId: 02d5d32c0120c64ff08e493696362f4a60e2642fa34b0b488cef14d4be278de9
name: perl-SVG
arch: src
version: 2.85
epoch: 0
release: 2.fc33
summary: An extension to generate stand-alone or inline SGV
url: https://metacpan.org/release/SVG
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVG-2.85-2.fc33.src.rpm
checksum_type: sha256
description:
  SVG.pm is a Perl extension to generate stand-alone or inline SVG
  (scaleable vector graphics) images using the W3C SVG XML recommendation


pkgId: 2d4c990112282a3854d68555f4d2a18b5b7c950f6ea35039b814a103b2da31dc
name: perl-SVG-Graph
arch: src
version: 0.04
epoch: 0
release: 15.fc33
summary: Visualize your data in Scalable Vector Graphics (SVG) format
url: https://metacpan.org/release/SVG-Graph
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVG-Graph-0.04-15.fc33.src.rpm
checksum_type: sha256
description:
  SVG::Graph is a suite of perl modules for plotting data. SVG::Graph
  currently supports plots of one-, two- and three-dimensional data, as well
  as N-ary rooted trees.


pkgId: 3eba3abbabb3bb6a49a757ace06d1430e8279ca46501effe827774f42fa9cf25
name: perl-SVG-Parser
arch: src
version: 1.03
epoch: 0
release: 35.fc33
summary: XML Parser for SVG documents
url: https://metacpan.org/release/SVG-Parser
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVG-Parser-1.03-35.fc33.src.rpm
checksum_type: sha256
description:
  SVG::Parser is an XML parser for SVG Documents. It takes XML as input and
  produces an SVG object as its output.


pkgId: 24d3b346d4cda2b4efe8829c1190fb11296606f160eef8bb6dab7053df12fee6
name: perl-SVK
arch: src
version: 2.2.3
epoch: 0
release: 31.fc33
summary: A Distributed Version Control System
url: https://metacpan.org/release/SVK
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVK-2.2.3-31.fc33.src.rpm
checksum_type: sha256
description:
  SVK is a decentralized version control system written in Perl. It uses
  the Subversion file system but provides additional features:

      * Offline operations like check-in, log, merge.
      * Distributed branches.
      * Lightweight checkout copy management (no .svn directories).
      * Advanced merge algorithms, like star-merge and cherry picking.

  For more information about the SVK project, visit http://svk.elixus.org/.


pkgId: 957cafcc5f20fa389857be8aa90adaa9f0ba05f8a65067ed36b59bc26c8da1d8
name: perl-SVN-Look
arch: src
version: 0.41
epoch: 0
release: 15.fc33
summary: Caching wrapper around the svnlook command
url: https://metacpan.org/release/SVN-Look
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVN-Look-0.41-15.fc33.src.rpm
checksum_type: sha256
description:
  The svnlook command is the workhorse of Subversion hook scripts, being used
  to gather all sorts of information about a repository, its revisions, and
  its transactions. This module provides a simple object oriented interface
  to a specific svnlook invocation, to make it easier to hook writers to get
  and use the information they need. Moreover, all the information gathered
  by calling the svnlook command is cached in the object, avoiding
  repetitious calls.


pkgId: 38259ad5d29e0d9dfb49d1747cd990bda7bb214b46443e684c806fc2cfbbeb61
name: perl-SVN-Simple
arch: src
version: 0.28
epoch: 0
release: 25.fc33
summary: A simple interface for writing a delta editor
url: https://metacpan.org/release/SVN-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SVN-Simple-0.28-25.fc33.src.rpm
checksum_type: sha256
description:
  SVN::Simple::Edit wraps the subversion delta editor with
  a perl friendly interface and then you could easily drive it for
  describing changes to a tree. A common usage is to wrap the commit
  editor, so you could make commits to a subversion repository easily.


pkgId: 9fd2795838450a9f45e56f367a410bd3c6599e1796f7b681c762eff39b1b8dcb
name: perl-Safe-Isa
arch: src
version: 1.000010
epoch: 0
release: 9.fc33
summary: Call isa, can, does and DOES safely on things that may not be objects
url: https://metacpan.org/release/Safe-Isa
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Safe-Isa-1.000010-9.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to call isa, can, does and DOES safely on things that
  may not be objects, without the risk of crashing.


pkgId: 6ef7a35f24c9c04ca813e21c2004d365ed993cff54647b146f43c90b3222fc93
name: perl-Sane
arch: src
version: 0.05
epoch: 0
release: 27.fc33
summary: Perl extension for the SANE (Scanner Access Now Easy) Project
url: https://metacpan.org/release/Sane
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sane-0.05-27.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to access SANE-compatible scanners in a Perlish and
  object-oriented way, freeing you from the casting and memory management in C,
  yet remaining very close in spirit to original API.


pkgId: 0835f4d4a55eecfddacb8596415c1e770dd9bf8b08253c720c149a6f51f5a015
name: perl-Scalar-Construct
arch: src
version: 0.000
epoch: 0
release: 27.fc33
summary: Build custom kinds of scalar
url: https://metacpan.org/release/Scalar-Construct
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-Construct-0.000-27.fc33.src.rpm
checksum_type: sha256
description:
  This module supplies functions to construct Perl scalar objects. While
  writable (variable) scalars can easily be constructed using the ordinary
  facilities of the Perl language, immutable (constant) scalars require a
  library such as this.


pkgId: fb3f537ef22cf853ac09a748988d992aeaf095219e0f24150b212da0a3fb633c
name: perl-Scalar-Does
arch: src
version: 0.203
epoch: 0
release: 13.fc33
summary: Check an object implements an interface
url: https://metacpan.org/release/Scalar-Does
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-Does-0.203-13.fc33.src.rpm
checksum_type: sha256
description:
  It has long been noted that Perl would benefit from a does() built-in. A
  check that ref($thing) eq 'ARRAY' doesn't allow you to accept an object
  that uses overloading to provide an array-like interface. This package
  delivers Scalar::Does Perl module that can do it.


pkgId: 97824ddfc3cd7f70335dca6c4e02c4536fde7932ba4f7178d2d78dc9943fe360
name: perl-Scalar-List-Utils
arch: src
version: 1.55
epoch: 4
release: 457.fc33
summary: A selection of general-utility scalar and list subroutines
url: https://metacpan.org/release/Scalar-List-Utils
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-List-Utils-1.55-457.fc33.src.rpm
checksum_type: sha256
description:
  This package contains a selection of subroutines that people have expressed
  would be nice to have in the perl core, but the usage would not really be
  high enough to warrant the use of a keyword, and the size so small such
  that being individual extensions would be wasteful.


pkgId: 6a8f34a0b47a8d29e8e6647e959a8efc608fd8b03a2b0caded9d1fffab0b43ec
name: perl-Scalar-Properties
arch: src
version: 1.100860
epoch: 0
release: 23.fc33
summary: Run-time properties on scalar variables
url: https://metacpan.org/release/Scalar-Properties
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-06.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-Properties-1.100860-23.fc33.src.rpm
checksum_type: sha256
description:
  Scalar::Properties attempts to make Perl more object-oriented by taking an idea
  from Ruby: Everything you manipulate is an object, and the results of those
  manipulations are objects themselves.


pkgId: 1252da0bff896175ccaa3f23261750c0baffe86292a32a5405609a9c557b9ccd
name: perl-Scalar-String
arch: src
version: 0.003
epoch: 0
release: 11.fc33
summary: String aspects of scalars
url: https://metacpan.org/release/Scalar-String
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-String-0.003-11.fc33.src.rpm
checksum_type: sha256
description:
  This module is about the string part of plain Perl scalars. A scalar has a
  string value, which is notionally a sequence of Unicode codepoints, but
  may be internally encoded in either ISO-8859-1 or UTF-8. In places, and
  more so in older versions of Perl, the internal encoding shows through. To
  fully understand Perl strings it is necessary to understand these
  implementation details.


pkgId: dae41646926f9f5501238d1dfda3a48870cefc58693623881550f13eff375978
name: perl-Scalar-Util-LooksLikeNumber
arch: src
version: 1.39.2
epoch: 0
release: 17.fc33
summary: Access to looks_like_number() perl API function
url: https://metacpan.org/release/Scalar-Util-LooksLikeNumber
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scalar-Util-LooksLikeNumber-1.39.2-17.fc33.src.rpm
checksum_type: sha256
description:
  Scalar::Util::LooksLikeNumber contains looks_like_number() like
  Scalar::Util's looks_like_number(), except it returns the raw value from
  the C function. Scalar::Util used to do this also, but it returns a
  booleanized value since 1.39.


pkgId: ef7d477dd9f1808a626b1832e0ca6bc5917e4b7bbcb5f0bd7c7210197a65d0a2
name: perl-Schedule-Cron
arch: src
version: 1.01
epoch: 0
release: 5.fc33
summary: Provides a simple but complete cron like scheduler
url: https://metacpan.org/release/Schedule-Cron
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Schedule-Cron-1.01-5.fc33.src.rpm
checksum_type: sha256
description:
  This module provides  a simple but complete cron  like scheduler.  I.e
  this modules can be  used for periodically executing Perl subroutines.
  The  dates  and  parameters  for  the subroutines  to  be  called  are
  specified with a format known as crontab entry (see man page crontab(5)
  or documentation of Schedule::Cron).

  The   philosophy  behind   Schedule::Cron  is   to   call  subroutines
  periodically from  within one single  Perl program instead  of letting
  cron  trigger several  (possibly different)  Perl  scripts. Everything
  under  one  roof.  Furthermore  Schedule::Cron  provides mechanism  to
  create crontab entries dynamically, which isn't that easy with cron.

  Schedule::Cron  knows  about  all   extensions  (well,  at  least  all
  extensions I'm aware of, i.e those  of the so called "Vixie" cron) for
  crontab entries like ranges  including 'steps', specification of month
  and days of the week by name or coexistence of lists and ranges in the
  same field. And  even a bit more (like lists  and ranges with symbolic
  names).

  This module is rather effective concerning system load.  It calculates
  the execution  dates in advance and  will sleep until  those dates are
  reached (and  wont wake  up every minute  to check for  execution like
  cron).   However, it  relies on  the accuracy  of your  sleep() system
  call.


pkgId: 447d950caf46fe9bc2d92487d8c6991300b7224ddfc8a268a151f123f5cda48f
name: perl-Schedule-Cron-Events
arch: src
version: 1.96
epoch: 0
release: 3.fc33
summary: Take a line from a crontab and find out when events will occur
url: https://metacpan.org/release/Schedule-Cron-Events
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Schedule-Cron-Events-1.96-3.fc33.src.rpm
checksum_type: sha256
description:
  Given a line from a crontab, tells you the time at which cron will next run
  the line, or when the last event occurred, relative to any date you choose.
  The object keeps that reference date internally, and updates it when you
  call nextEvent() or previousEvent() - such that successive calls will give
  you a sequence of events going forward, or backwards, in time.


pkgId: 2be2510347230fce2b8a747d3942c629c2e51ff3f01b5b5d4be8ca54955f7a59
name: perl-Schedule-RateLimiter
arch: src
version: 0.01
epoch: 0
release: 22.fc33
summary: Prevent events from happening too quickly
url: https://metacpan.org/release/Schedule-RateLimiter
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Schedule-RateLimiter-0.01-22.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a way to voluntarily restrict how many times a given
  action may take place within a specified time frame.  Such a tool may be useful
  if you have written something which periodically polls some public resource and
  want to ensure that you do not overburden that resource with too many requests.


pkgId: 5ffd7667cc962735aacc3185b6e2dc82d8e4729bbbe34383bf25b72fcd7d447d
name: perl-Scope-Guard
arch: src
version: 0.21
epoch: 0
release: 15.fc33
summary: Lexically scoped resource management
url: https://metacpan.org/release/Scope-Guard
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scope-Guard-0.21-15.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a convenient way to perform cleanup or other forms of
  resource management at the end of a scope. It is particularly useful when
  dealing with exceptions: the Scope::Guard constructor takes a reference to
  a subroutine that is guaranteed to be called even if the thread of
  execution is aborted prematurely. This effectively allows lexically-scoped
  "promises" to be made that are automatically honored by perl's garbage
  collector.


pkgId: 2787b3751e754dcfa6e1b55bc60fca443981cc3dc5b91efb9948d1bfa91d6108
name: perl-Scope-Upper
arch: src
version: 0.32
epoch: 0
release: 5.fc33
summary: Act on upper scopes
url: https://metacpan.org/release/Scope-Upper
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Scope-Upper-0.32-5.fc33.src.rpm
checksum_type: sha256
description:
  This module lets you defer actions that will take place when the control
  flow returns into an upper scope. Currently, you can hook an upper scope
  end, or localize variables, array/hash values or deletions of elements
  in higher contexts. You can also return to an upper level and know which
  context was in use then.


pkgId: 93f7ba5fd937b072cd0b7958007bb5c5ad045fb2fdd66235cfacff15c8aafc2a
name: perl-Search-Elasticsearch
arch: src
version: 6.81
epoch: 0
release: 3.fc33
summary: Official client for Elasticsearch
url: https://metacpan.org/release/Search-Elasticsearch
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Search-Elasticsearch-6.81-3.fc33.src.rpm
checksum_type: sha256
description:
  Search::Elasticsearch is the official Perl client for Elasticsearch,
  supported by elasticsearch.com. Elasticsearch itself is a flexible and
  powerful open source, distributed real-time search and analytics engine for
  the cloud. You can read more about it on elasticsearch.org.


pkgId: 5ab444ec6009b3f97368ff2fc163764f8f45e49fba98ae8cd3ccce6ca352b64c
name: perl-Search-Xapian
arch: src
version: 1.2.25.2
epoch: 0
release: 7.fc33
summary: Xapian perl bindings
url: https://metacpan.org/release/Search-Xapian
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Search-Xapian-1.2.25.2-7.fc33.src.rpm
checksum_type: sha256
description:
  This module wraps most methods of most Xapian classes. The missing classes
  and methods should be added in the future. It also provides a simplified,
  more 'perlish' interface to some common operations, as demonstrated above.


pkgId: 7f732d73af32eaf4fc17416b87c64a27d724119274c968e9adafc652ae68d17f
name: perl-Sendmail-PMilter
arch: src
version: 1.00
epoch: 0
release: 29.fc33
summary: Perl binding of Sendmail Milter protocol
url: https://metacpan.org/release/Sendmail-PMilter
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sendmail-PMilter-1.00-29.fc33.src.rpm
checksum_type: sha256
description:
  Sendmail::PMilter is a mail filtering API implementing the Sendmail milter
  protocol in pure Perl. This allows Sendmail servers (and perhaps other MTAs
  implementing milter) to filter and modify mail in transit during the SMTP
  connection, all in Perl.

  It should be noted that PMilter 0.90 and later is NOT compatible with
  scripts written for PMilter 0.5 and earlier.  The API has been reworked
  significantly, and the enhanced APIs and rule logic provided by PMilter
  0.5 and earlier has been factored out for inclusion in a separate package
  called Mail::Milter.


pkgId: d2fa31250fd141659e777fbab64a6763d0eea492b6774185bd5ce0a9d40617ef
name: perl-Sentinel
arch: src
version: 0.06
epoch: 0
release: 7.fc33
summary: Create lightweight SCALARs with get/set callbacks
url: https://metacpan.org/release/Sentinel
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sentinel-0.06-7.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a single lvalue function, sentinel, which yields a
  scalar that invoke callbacks to get or set its value. Primarily this is
  useful to create lvalue object accessors or other functions, to invoke
  actual code when a new value is set, rather than simply updating a
  scalar variable.


pkgId: 02cef80ce1f1f61a61db6bc6e7759a5970deaf44ecd195fa2eb77288326a36d1
name: perl-Sereal
arch: src
version: 4.018
epoch: 0
release: 1.fc33
summary: Fast, compact, powerful binary (de-)serialization
url: https://metacpan.org/release/Sereal
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sereal-4.018-1.fc33.src.rpm
checksum_type: sha256
description:
  Sereal is an efficient, compact-output, binary and feature-rich serialization
  protocol. The Perl encoder is implemented as the Sereal::Encoder module, the
  Perl decoder correspondingly as Sereal::Decoder. This Sereal module is a very
  thin wrapper around both Sereal::Encoder and Sereal::Decoder. It depends on
  both and loads both.


pkgId: 5f85a3217bdd8051c5fd127d18f228f11f9982eec8b9d8e8c3ac4823a76115d5
name: perl-Sereal-Decoder
arch: src
version: 4.018
epoch: 0
release: 1.fc33
summary: Perl deserialization for Sereal format
url: https://metacpan.org/release/Sereal-Decoder
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sereal-Decoder-4.018-1.fc33.src.rpm
checksum_type: sha256
description:
  This library implements a deserializer for an efficient, compact-output,
  and feature-rich binary protocol called Sereal.


pkgId: 3e575d08c6ea9948632a367a1d1e507ec105f246722d1a3df664bef0431193bf
name: perl-Sereal-Encoder
arch: src
version: 4.018
epoch: 0
release: 1.fc33
summary: Perl serialization into Sereal format
url: https://metacpan.org/release/Sereal-Encoder
rpm_license: (GPL+ or Artistic) and LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sereal-Encoder-4.018-1.fc33.src.rpm
checksum_type: sha256
description:
  This library implements an efficient, compact-output, and feature-rich
  serializer using a binary protocol called Sereal.


pkgId: a39d8e6ed2767432e8061e65c1c66eddfc7730519fd25ed1e8a4bb32a6503f83
name: perl-Server-Starter
arch: src
version: 0.35
epoch: 0
release: 4.fc33
summary: Superdaemon for hot-deploying server programs
url: https://metacpan.org/release/Server-Starter
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Server-Starter-0.35-4.fc33.src.rpm
checksum_type: sha256
description:
  It is often a pain to write a server program that supports graceful
  restarts, with no resource leaks. Server::Starter, solves the problem by
  splitting the task into two. One is start_server, a script provided as a
  part of the module, which works as a superdaemon that binds to zero or
  more TCP ports, and repeatedly spawns the server program that actually
  handles the necessary tasks (for example, responding to incoming
  connections). The spawned server programs under Server::Starter call
  accept(2) and handle the requests.


pkgId: c8f9707b785e1af1329ae2a6d903ebd0456e067d496ddddb6c1f462e181431a4
name: perl-ServiceNow-API
arch: src
version: 1.01
epoch: 0
release: 24.fc33
summary: ServiceNow API for accessing the Service-now platform
url: http://wiki.servicenow.com/index.php?title=Perl_API
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-ServiceNow-API-1.01-24.fc33.src.rpm
checksum_type: sha256
description:
  The Perl API provides a library of Perl classes and sub routines
  for programmatic access to the platform and its applications.
  The API utilizes the SOAP web service interface of the platform.


pkgId: 08fb1ede66468024680d790a685eb6ba1329423569022d2e8687102ec11b17df
name: perl-Session-Storage-Secure
arch: src
version: 0.011
epoch: 0
release: 9.fc33
summary: Encrypted, expiring, compressed, serialized session data with integrity
url: https://metacpan.org/release/Session-Storage-Secure
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Session-Storage-Secure-0.011-9.fc33.src.rpm
checksum_type: sha256
description:
  This module implements a secure way to encode session data. It is primarily
  intended for storing session data in browser cookies, but could be used
  with other back-end storage where security of stored session data is
  important.


pkgId: 428b56780d54e440862e9c5768a0df1d320040141b39903484fd9fa8176ab40e
name: perl-Set-Array
arch: src
version: 0.30
epoch: 0
release: 20.fc33
summary: Arrays as objects with lots of handy methods
url: https://metacpan.org/release/Set-Array
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Set-Array-0.30-20.fc33.src.rpm
checksum_type: sha256
description:
  Set::Array allows you to create arrays as objects and use OO-style methods
  on them. Many convenient methods are provided here that appear in the
  FAQ's, the Perl Cookbook or posts from comp.lang.perl.misc. In addition,
  there are Set methods with corresponding (overloaded) operators for the
  purpose of Set comparison, i.e. +, ==, etc.


pkgId: 690079158f936363e991656d9b0f5db74d1a8bb9d58510cfc92408cfa5359591
name: perl-Set-Crontab
arch: src
version: 1.03
epoch: 0
release: 26.fc33
summary: Expand crontab(5)-style integer lists
url: https://metacpan.org/release/Set-Crontab
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Set-Crontab-1.03-26.fc33.src.rpm
checksum_type: sha256
description:
  Set::Crontab parses crontab-style lists of integers and defines some
  utility functions to make it easier to deal with them.


pkgId: b8bda2d72ec0b017b136cf4b4c667f6698d674daa00719f1424ce479b47a71e0
name: perl-Set-IntSpan
arch: src
version: 1.19
epoch: 0
release: 22.fc33
summary: Perl module for managing sets of integers
url: https://metacpan.org/release/Set-IntSpan
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Set-IntSpan-1.19-22.fc33.src.rpm
checksum_type: sha256
description:
  Set::IntSpan manages sets of integers. It is optimized for sets that
  have long runs of consecutive integers.


pkgId: 0f613df1954fc56d6af6d391cdc665947c423c08d451eee26ea337a0b6c05235
name: perl-Set-Object
arch: src
version: 1.40
epoch: 0
release: 3.fc33
summary: Set of objects and strings
url: https://metacpan.org/release/Set-Object
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Set-Object-1.40-3.fc33.src.rpm
checksum_type: sha256
description:
  This modules implements a set of objects, that is, an unordered
  collection of objects without duplication.

  The term *objects* is applied loosely - for the sake of Set::Object,
  anything that is a reference is considered an object.


pkgId: 60c4886e59c0c491a7b015bbbbcb7ce5074868863c8cfbee0a4178bd8d208fea
name: perl-Set-Tiny
arch: src
version: 0.04
epoch: 0
release: 17.fc33
summary: Simple sets of strings
url: https://metacpan.org/release/Set-Tiny
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Set-Tiny-0.04-17.fc33.src.rpm
checksum_type: sha256
description:
  Set::Tiny is a thin wrapper around regular Perl hashes to perform often
  needed set operations, such as testing two sets of strings for equality, or
  checking whether one is contained within the other.


pkgId: 7022c2a9f4bc0cd93d3866f52eb6034146ad22ab84e27dbf3c4a71b1d4da0c44
name: perl-Shell
arch: src
version: 0.73
epoch: 0
release: 15.fc33
summary: Run shell commands transparently within perl
url: https://metacpan.org/release/Shell
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Shell-0.73-15.fc33.src.rpm
checksum_type: sha256
description:
  Using Shell while importing "foo" creates a subroutine "foo" in the name space
  of the importing package. Calling "foo" with arguments "arg1", "arg2", ...
  results in a shell command "foo arg1 arg2...", where the function name and the
  arguments are joined with a blank.

  This package is included as a show case, illustrating a few Perl features. It
  shouldn't be used for production programs.


pkgId: 9b7ffaf8ca8e2fff3bf4b20c5f0a5b7c9128d9f2f1369e834116862f7896b81c
name: perl-Shell-Config-Generate
arch: src
version: 0.34
epoch: 0
release: 3.fc33
summary: Portably generate configuration for any shell
url: https://metacpan.org/release/Shell-Config-Generate
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-39.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Shell-Config-Generate-0.34-3.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides an interface for specifying shell configurations for
  different shell environments without having to worry about the arcane
  differences between shells such as csh, sh, cmd.exe and command.com.


pkgId: 00b96b518ea6cdeadbad97631786514784f8000ee7ecab3f31fef11d4a353f0f
name: perl-Shell-Guess
arch: src
version: 0.09
epoch: 0
release: 7.fc33
summary: Make an educated guess about the shell in use
url: https://metacpan.org/release/Shell-Guess
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Shell-Guess-0.09-7.fc33.src.rpm
checksum_type: sha256
description:
  The Shell::Guess Perl module makes a reasonably aggressive attempt to
  determine the shell being employed by the user, either the shell that executed
  the Perl script directly, or the users' login shell.


pkgId: 505e22a731803875348ea775618889cd430d41d04bdc20e5158f757fae2b5c19
name: perl-Shipwright
arch: src
version: 2.4.42
epoch: 0
release: 10.fc33
summary: Build and Manage Self-contained Software Bundle
url: https://metacpan.org/release/Shipwright
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Shipwright-2.4.42-10.fc33.src.rpm
checksum_type: sha256
description:
  Shipwright is a tool to help you bundle your software with all its dependencies,
  regardless of whether they are CPAN modules or non-Perl modules from elsewhere.
  Shipwright makes the bundle work easy.


pkgId: 577520a1c51fd9cf3e4567d698cf02535599843145aa574b210e54b42dbe8179
name: perl-Signal-Mask
arch: src
version: 0.008
epoch: 0
release: 20.fc33
summary: Signal masks made easy
url: https://metacpan.org/release/Signal-Mask
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Signal-Mask-0.008-20.fc33.src.rpm
checksum_type: sha256
description:
  Signal::Mask is an abstraction around your process or thread signal mask.
  It is used to fetch and/or change the signal mask of the calling process or
  thread. The signal mask is the set of signals whose delivery is currently
  blocked for the caller. It is available as the global hash Signal::Mask.


pkgId: 34b374342ada83120852271542205326f495e3620955ce448b3c7deb65a0df93
name: perl-Smart-Comments
arch: src
version: 1.06
epoch: 1
release: 15.fc33
summary: Comments that do more than just sit there
url: https://metacpan.org/release/Smart-Comments
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Smart-Comments-1.06-15.fc33.src.rpm
checksum_type: sha256
description:
  Smart comments provide an easy way to insert debugging and tracking code into
  a program. They can report the value of a variable, track the progress of a
  loop, and verify that particular assertions are true.

  Best of all, when you're finished debugging, you don't have to remove them.
  Simply commenting out the use Smart::Comments line turns them back into
  regular comments. Leaving smart comments in your code is smart because if you
  needed them once, you'll almost certainly need them again later.


pkgId: 92f5ce9362467d5c46026f6729963ce547f30473bbd43bea4884a58189514f9f
name: perl-Snowball-Norwegian
arch: src
version: 1.2
epoch: 0
release: 29.fc33
summary: Porter's stemming algorithm for Norwegian
url: https://metacpan.org/release/Snowball-Norwegian
rpm_license: GPLv2 or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Snowball-Norwegian-1.2-29.fc33.src.rpm
checksum_type: sha256
description:
  The stem function takes a scalar as a parameter and stems the word according to
  Martin Porter's Norwegian stemming algorithm, which can be found at the
  Snowball website: http://snowball.tartarus.org/.


pkgId: c079fc2e1e16b691c7d2fba02ab1e48e79fbef2595f3b05d34f7e48feb2a143e
name: perl-Snowball-Swedish
arch: src
version: 1.2
epoch: 0
release: 30.fc33
summary: Porter's stemming algorithm for Swedish
url: https://metacpan.org/release/Snowball-Swedish
rpm_license: GPLv2 or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Snowball-Swedish-1.2-30.fc33.src.rpm
checksum_type: sha256
description:
  The stem function takes a scalar as a parameter and stems the word according to
  Martin Porter's Swedish stemming algorithm, which can be found at the Snowball
  website: http://snowball.tartarus.org/.


pkgId: 7276693cc2c8c2bfef002f8c9938eadb2915d718b98c8c7b8a8a8406ca574a60
name: perl-Socket
arch: src
version: 2.030
epoch: 4
release: 2.fc33
summary: Networking constants and support functions
url: https://metacpan.org/release/Socket
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket-2.030-2.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides a variety of constants, structure manipulators and
  other functions related to socket-based networking. The values and functions
  provided are useful when used in conjunction with Perl core functions such as
  socket(), setsockopt() and bind(). It also provides several other support
  functions, mostly for dealing with conversions of network addresses between
  human-readable and native binary forms, and for hostname resolver operations.


pkgId: 4af3707ee9eff17396dbc173e3d428ce8dde6952e5fe94204d81f6a831edf877
name: perl-Socket-GetAddrInfo
arch: src
version: 0.22
epoch: 0
release: 21.fc33
summary: RFC 2553's "getaddrinfo" and "getnameinfo" functions
url: https://metacpan.org/release/Socket-GetAddrInfo
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-34.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket-GetAddrInfo-0.22-21.fc33.src.rpm
checksum_type: sha256
description:
  The RFC 2553 functions getaddrinfo and getnameinfo provide an abstracted
  way to convert between a pair of host name/service name and socket
  addresses, or vice versa. getaddrinfo converts names into a set of
  arguments to pass to the socket() and connect() syscalls, and getnameinfo
  converts a socket address back into its host name/service name pair.


pkgId: c1e3be125396f8089004e2bd9d010ebf42ef8baf2e2dc7f54d9d234df9f44740
name: perl-Socket-MsgHdr
arch: src
version: 0.05
epoch: 0
release: 7.fc33
summary: Sendmsg, recvmsg and ancillary data operations
url: https://metacpan.org/release/Socket-MsgHdr
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket-MsgHdr-0.05-7.fc33.src.rpm
checksum_type: sha256
description:
  Socket::MsgHdr provides advanced socket messaging operations via sendmsg
  and recvmsg. Like their C counterparts, these functions accept few
  parameters, instead stuffing a lot of information into a complex structure.


pkgId: 5d939cf13cc50ca343769f3ad797f609d8135053cfde0187c74ac8073cc1bdc0
name: perl-Socket-Netlink
arch: src
version: 0.05
epoch: 0
release: 15.fc33
summary: Interface to Linux's PF_NETLINK socket family
url: https://metacpan.org/release/Socket-Netlink
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket-Netlink-0.05-15.fc33.src.rpm
checksum_type: sha256
description:
  This module contains the low-level constants and structure handling
  functions required to use Linux's PF_NETLINK socket family. It is suggested
  to use the high-level object interface to this instead; see
  IO::Socket::Netlink.


pkgId: c8c40702638db48256a013858d3d8bc24ae28bc94ddaf5f851ab98583eb77d5d
name: perl-Socket-Netlink-Route
arch: src
version: 0.05
epoch: 0
release: 22.fc33
summary: Interface to Linux's NETLINK_ROUTE netlink socket protocol
url: https://metacpan.org/release/Socket-Netlink-Route
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket-Netlink-Route-0.05-22.fc33.src.rpm
checksum_type: sha256
description:
  This module contains the low-level constants and structure handling
  functions required to use the NETLINK_ROUTE protocol of Linux's PF_NETLINK
  socket family. It is suggested to use the high-level object interface to
  this protocol instead; see IO::Socket::Netlink::Route.


pkgId: b76f6db7054e38ab6780354b200acfa3689755810d155b43631bde2a7c1cfa20
name: perl-Socket6
arch: src
version: 0.29
epoch: 0
release: 8.fc33
summary: IPv6 related part of the C socket.h defines and structure manipulators
url: https://metacpan.org/release/Socket6
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Socket6-0.29-8.fc33.src.rpm
checksum_type: sha256
description:
  This module supports getaddrinfo() and getnameinfo() to intend to enable
  protocol independent programming. If your environment supports IPv6, IPv6
  related defines such as AF_INET6 are included.


pkgId: 879947768af3e4efb679764f49e342f35c038e15ed2823ee15b1b9c50f3b8a61
name: perl-Software-License-CCpack
arch: src
version: 1.11
epoch: 0
release: 24.fc33
summary: Software::License pack for Creative Commons' licenses
url: https://metacpan.org/release/Software-License-CCpack
rpm_license: LGPLv3
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Software-License-CCpack-1.11-24.fc33.src.rpm
checksum_type: sha256
description:
  This "license pack" contains all of the licenses from Creative Commons, except
  for CC0, which is already included in Software::License.

  Note that I don't recommend using these licenses for your own CPAN modules
  (most of the licenses aren't even compatible with CPAN). However, S:L modules
  are useful for more than mere CPAN::Meta::license declaration, so these modules
  exist for those other purposes.


pkgId: 0f4817b04450173150e9af00e96f919c74bb7303cab795febc84110622f752f5
name: perl-Sort-Maker
arch: src
version: 0.06
epoch: 0
release: 21.fc33
summary: Simple way to make efficient sort subs
url: https://metacpan.org/release/Sort-Maker
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sort-Maker-0.06-21.fc33.src.rpm
checksum_type: sha256
description:
  This module has two main goals: to make it easy to create correct sort
  functions, and to make it simple to select the optimum sorting algorithm
  for the number of items to be sorted. Sort::Maker generates complete sort
  subroutines in one of four styles: plain, Orcish Maneuver, Schwartzian
  Transform, and the Guttman-Rosler Transform. You can also get the source for
  a sort sub you create via the sorter_source call.


pkgId: 020bc11a2580156b85d2382ad0f4aa9682bb9bda05f7eabaef9bd33c1d126cc7
name: perl-Sort-MergeSort
arch: src
version: 0.31
epoch: 0
release: 16.fc33
summary: Merge pre-sorted input streams
url: https://metacpan.org/release/Sort-MergeSort
rpm_license: (Artistic 2.0 or LGPLv2) and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sort-MergeSort-0.31-16.fc33.src.rpm
checksum_type: sha256
description:
  Given a comparison function and a bunch of iterators that produce data that
  is already sorted, mergesort() will provide an iterator that produces
  sorted and merged data from all of the input iterators.


pkgId: ff5a947914224d4e5e1bbd515055ebaa1c06bf06ffb772634d1453bc4e82110f
name: perl-Sort-Naturally
arch: src
version: 1.03
epoch: 0
release: 25.fc33
summary: Sort lexically, but sort numeral parts numerically
url: https://metacpan.org/release/Sort-Naturally
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sort-Naturally-1.03-25.fc33.src.rpm
checksum_type: sha256
description:
  This module exports two functions, 'nsort' and 'ncmp'; they are used in
  implementing my idea of a "natural sorting" algorithm. Under natural
  sorting, numeric substrings are compared numerically, and other
  word-characters are compared lexically.


pkgId: 20046534dc2dc24153355e4a07908bf0bb2e028bbb0437a42b674e65a82237e0
name: perl-Sort-Versions
arch: src
version: 1.62
epoch: 0
release: 16.fc33
summary: Perl module for sorting of revision-like numbers
url: https://metacpan.org/release/Sort-Versions
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sort-Versions-1.62-16.fc33.src.rpm
checksum_type: sha256
description:
  A perl 5 module for sorting of revision-like numbers

  Sort::Versions allows easy sorting of mixed non-numeric and numeric strings,
  like the 'version numbers' that many shared library systems and revision
  control packages use. This is quite useful if you are trying to deal with
  shared libraries. It can also be applied to applications that intersperse
  variable-width numeric fields within text. Other applications can
  undoubtedly be found.


pkgId: 627024fc1dd4acd23dc95e632c40165c75a6ed2847e752661a79cce9a7d6cf4c
name: perl-Specio
arch: src
version: 0.46
epoch: 0
release: 4.fc33
summary: Type constraints and coercions for Perl
url: https://metacpan.org/release/Specio
rpm_license: Artistic 2.0 and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Specio-0.46-4.fc33.src.rpm
checksum_type: sha256
description:
  The Specio distribution provides classes for representing type constraints
  and coercion, along with syntax sugar for declaring them.

  Note that this is not a proper type system for Perl. Nothing in this
  distribution will magically make the Perl interpreter start checking a value's
  type on assignment to a variable. In fact, there's no built-in way to apply a
  type to a variable at all.

  Instead, you can explicitly check a value against a type, and optionally coerce
  values to that type.


pkgId: 097b999ced536738b708f52a231ea508e5df5ba2a83938a100e16346aff62839
name: perl-Specio-Library-Path-Tiny
arch: src
version: 0.04
epoch: 0
release: 13.fc33
summary: Path::Tiny types and coercions for Specio
url: https://metacpan.org/release/Specio-Library-Path-Tiny
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Specio-Library-Path-Tiny-0.04-13.fc33.src.rpm
checksum_type: sha256
description:
  This library provides a set of Path::Tiny types and coercions for Specio.
  These types can be used with Moose, Moo, Params::ValidationCompiler, and
  other modules.


pkgId: a25a84dd2d9f711e3bae85c500c8ba1d8b40c714419d65be16b436d4ec9947c7
name: perl-Spiffy
arch: src
version: 0.46
epoch: 0
release: 18.fc33
summary: Framework for doing object oriented (OO) programming in Perl
url: https://metacpan.org/release/Spiffy
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spiffy-0.46-18.fc33.src.rpm
checksum_type: sha256
description:
  "Spiffy" is a framework and methodology for doing object oriented (OO)
  programming in Perl. Spiffy combines the best parts of Exporter.pm, base.pm,
  mixin.pm and SUPER.pm into one magic foundation class. It attempts to fix all
  the nits and warts of traditional Perl OO, in a clean, straightforward and
  (perhaps someday) standard way.


pkgId: d08141417ad4f2261aa5bb87203ccd5fffcb50b77cb51f392ff4bd768fabbdde
name: perl-Spoon
arch: src
version: 0.24
epoch: 0
release: 42.fc33
summary: Spiffy Application Building Framework
url: https://metacpan.org/release/Spoon
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spoon-0.24-42.fc33.src.rpm
checksum_type: sha256
description:
  Spoon is an Application Framework that is designed primarily for
  building Social Software web applications. The Kwiki wiki software is
  built on top of Spoon.


pkgId: 6e4408f3fefc9721eb04b98ed152d39a7762793dc6a5622983d5257d2f5974ac
name: perl-Spreadsheet-ParseExcel-Simple
arch: src
version: 1.04
epoch: 0
release: 35.fc33
summary: Simple interface to Excel data
url: https://metacpan.org/release/Spreadsheet-ParseExcel-Simple
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spreadsheet-ParseExcel-Simple-1.04-35.fc33.src.rpm
checksum_type: sha256
description:
  This library provides a simple abstraction of the Spreadsheet::ParseExcel
  module, for a kinder, gentler interface.


pkgId: 5c860f2ebda6229d7eef8f6dbf2cea5b98653ef529f1af241e2b7b434bd897b1
name: perl-Spreadsheet-ParseXLSX
arch: src
version: 0.27
epoch: 0
release: 6.fc33
summary: Parse XLSX files
url: https://github.com/doy/spreadsheet-parsexlsx
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spreadsheet-ParseXLSX-0.27-6.fc33.src.rpm
checksum_type: sha256
description:
  This module is an adaptor for <Spreadsheet::ParseExcel> that reads XLSX files.
  For documentation about the various data that you can retrieve from these
  classes, please see <Spreadsheet::ParseExcel>,
  <Spreadsheet::ParseExcel::Workbook>, <Spreadsheet::ParseExcel::Worksheet>, and
  <Spreadsheet::ParseExcel::Cell>.


pkgId: aeda3b85814868b80779db04c84ec70cb47f7e0ef68365aa00dd315995c878ee
name: perl-Spreadsheet-WriteExcel
arch: src
version: 2.40
epoch: 0
release: 20.fc33
summary: Write formatted text and numbers to a cross-platform Excel binary file
url: https://metacpan.org/release/Spreadsheet-WriteExcel
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spreadsheet-WriteExcel-2.40-20.fc33.src.rpm
checksum_type: sha256
description:
  The Spreadsheet::WriteExcel module can be used to create a cross-
  platform Excel binary file. Multiple worksheets can be added to a
  workbook and formatting can be applied to cells. Text, numbers,
  formulas, hyperlinks and images can be written to the cells.

  The Excel file produced by this module is compatible with 97,
  2000, 2002 and 2003. Generated files are also compatible with the
  spreadsheet applications Gnumeric and OpenOffice.org.

  This module cannot be used to read an Excel file. See
  Spreadsheet::ParseExcel or look at the main documentation for some
  suggestions. This module cannot be used to write to an existing
  Excel file.


pkgId: 120218f32d2e83000a01a563d45af4daa5c5a4b42a9e1e86fdf88d075aec589e
name: perl-Spreadsheet-WriteExcel-Simple
arch: src
version: 1.04
epoch: 0
release: 35.fc33
summary: Simple single-sheet Excel document creator
url: https://metacpan.org/release/Spreadsheet-WriteExcel-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spreadsheet-WriteExcel-Simple-1.04-35.fc33.src.rpm
checksum_type: sha256
description:
  This library provides a simple abstraction of the Spreadsheet::WriteExcel
  module, for a kinder, gentler method of creating simple single-sheet Excel
  documents.


pkgId: 77b535b59bab38972958c520cbd72e78786c5ea44438c8bd340c77b4cd7fb944
name: perl-Spreadsheet-XLSX
arch: src
version: 0.15
epoch: 0
release: 15.fc33
summary: Perl extension for reading Microsoft Excel 2007 files
url: https://metacpan.org/release/Spreadsheet-XLSX
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Spreadsheet-XLSX-0.15-15.fc33.src.rpm
checksum_type: sha256
description:
  The Spreadsheet::XLSX module is a emulation of Spreadsheet::ParseExcel for
  Excel 2007 (.xlsx) file format in a quick and dirty way. It supports styles
  and many of the Excel's quirks, but not all. It populates the classes from
  Spreadsheet::ParseExcel for interoperability; including workbook, worksheet
  and cell.


pkgId: bd99c87305dd27fef8ad8f13db42ed6f3feea373241391ff11e73a90b594c3f9
name: perl-Starlet
arch: src
version: 0.31
epoch: 0
release: 13.fc33
summary: Simple, high-performance PSGI/Plack HTTP server
url: https://metacpan.org/release/Starlet
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Starlet-0.31-13.fc33.src.rpm
checksum_type: sha256
description:
  Starlet is a standalone HTTP/1.0 server with support for keep-alive, prefork,
  graceful shutdown, hot deploy, fast HTTP processing, and is suitable for
  running HTTP application servers behind a reverse proxy.


pkgId: 5d69bdf68537a72db23c6645d2b4fe3815c123a987b1b36ee6c9b9816bdd89da
name: perl-Starman
arch: src
version: 0.4015
epoch: 0
release: 6.fc33
summary: High-performance preforking PSGI/Plack web server
url: https://metacpan.org/release/Starman
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Starman-0.4015-6.fc33.src.rpm
checksum_type: sha256
description:
  Starman is a PSGI perl web server that has unique features such as high
  performance, preforking, use of signals and a small memory footprint. It is PSGI
  compatible and offers HTTP/1.1 support.


pkgId: 1266b36a74c0f8650a6e09d6d1f2a35633a96bf5b36c96b9f1d5ac9211212875
name: perl-Statistics-Basic
arch: src
version: 1.6611
epoch: 0
release: 18.fc33
summary: A collection of very basic statistics modules
url: https://metacpan.org/release/Statistics-Basic
rpm_license: LGPLv2 and LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Statistics-Basic-1.6611-18.fc33.src.rpm
checksum_type: sha256
description:
  use Statistics::Basic qw(:all);

  my $median = median( 1,2,3 );
  my $mean   = mean(  [1,2,3]); # array refs are ok too

  my $variance = variance( 1,2,3 );
  my $stddev   = stddev(   1,2,3 );

  my $correlation = correlation( [1 .. 3], [1 .. 3] );


pkgId: 50f4a33e2afbb2a0fef462635c3fbd451a744acec90fd2b76e06ebe9e376b8cc
name: perl-Statistics-CaseResampling
arch: src
version: 0.15
epoch: 0
release: 22.fc33
summary: Resampling and calculation of medians with confidence intervals
url: https://metacpan.org/release/Statistics-CaseResampling
rpm_license: (GPL+ or Artistic) and (Copyright Only)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Statistics-CaseResampling-0.15-22.fc33.src.rpm
checksum_type: sha256
description:
  The purpose of this module is to calculate the median (or in principle also
  other statistics) with confidence intervals on a sample. To do that, it uses
  a technique called boot-strapping. In a nutshell, it resamples the sample
  a lot of times and for each resample, it calculates the median. From the
  distribution of medians, it then calculates the confidence limits.


pkgId: d519b6f8c9cf180f7c823ea0c980897f25027e7e692720dc1df592046ba5f606
name: perl-Statistics-Contingency
arch: src
version: 0.09
epoch: 0
release: 19.fc33
summary: Calculate precision, recall, F1, accuracy, etc
url: https://metacpan.org/release/Statistics-Contingency
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Statistics-Contingency-0.09-19.fc33.src.rpm
checksum_type: sha256
description:
  The Statistics::Contingency class helps you calculate several useful
  statistical measures based on 2x2 "contingency tables". I use these
  measures to help judge the results of automatic text categorization
  experiments, but they are useful in other situations as well.


pkgId: 6a69b5be2c5077dfef739801cac631c558e668af5a27039387ed285609354f31
name: perl-Statistics-Descriptive
arch: src
version: 3.0702
epoch: 0
release: 8.fc33
summary: Perl module of basic descriptive statistical functions
url: https://metacpan.org/release/Statistics-Descriptive
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Statistics-Descriptive-3.0702-8.fc33.src.rpm
checksum_type: sha256
description:
  This module provides basic functions used in descriptive statistics. It has
  an object oriented design and supports two different types of data storage
  and calculation objects: sparse and full. With the sparse method, none of
  the data is stored and only a few statistical measures are available. Using
  the full method, the entire data set is retained and additional functions
  are available.


pkgId: 13713182fbc0f7a845d7784c3f269f9aeb6351bdcd44c4cd91c858d645bce9c6
name: perl-Storable
arch: src
version: 3.21
epoch: 1
release: 457.fc33
summary: Persistence for Perl data structures
url: https://metacpan.org/release/Storable
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Storable-3.21-457.fc33.src.rpm
checksum_type: sha256
description:
  The Storable package brings persistence to your Perl data structures
  containing scalar, array, hash or reference objects, i.e. anything that
  can be conveniently stored to disk and retrieved at a later time.


pkgId: bfc9c55b7c4766ae4980464f50f22585ed2843d232f4b9942f49d271e0b37c99
name: perl-Stream-Buffered
arch: src
version: 0.03
epoch: 0
release: 19.fc33
summary: Temporary buffer to save bytes
url: https://metacpan.org/release/Stream-Buffered
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Stream-Buffered-0.03-19.fc33.src.rpm
checksum_type: sha256
description:
  Stream::Buffered is a buffer class to store arbitrary length of byte
  strings and then get a seekable filehandle once everything is buffered. It
  uses PerlIO and/or temporary file to save the buffer depending on the
  length of the size.


pkgId: ec509b15b1fb45df53e7c8cafafbe6f57d723b7db9687895a1ae3eea9d12371e
name: perl-String-Approx
arch: src
version: 3.28
epoch: 0
release: 13.fc33
summary: Perl extension for approximate matching (fuzzy matching)
url: https://metacpan.org/release/String-Approx
rpm_license: LGPLv2+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Approx-3.28-13.fc33.src.rpm
checksum_type: sha256
description:
  String::Approx lets you match and substitute strings approximately. With
  this you can emulate errors: typing errorrs, speling errors, closely
  related vocabularies (colour color), genetic mutations (GAG ACT),
  abbreviations (McScot, MacScot).


pkgId: b8d406384d03fe14f8c0464b409f442bedb71ee35619d665bc84cb4d6d04feee
name: perl-String-Base
arch: src
version: 0.003
epoch: 0
release: 10.fc33
summary: String index offsetting
url: https://metacpan.org/release/String-Base
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Base-0.003-10.fc33.src.rpm
checksum_type: sha256
description:
  This module implements automatic offsetting of string indices. In normal
  Perl, the first character of a string has index 0, the second character has
  index 1, and so on. This module allows string indexes to start at some
  other value. Most commonly it is used to give the first character of a
  string the index 1 (and the second 2, and so on), to imitate the indexing
  behavior of FORTRAN and many other languages. It is usually considered
  poor style to do this.


pkgId: fb093d666f12feffc4b40dfa3816eeab763c7e6595e620ff18f501c1aced9712
name: perl-String-CRC32
arch: src
version: 1.8
epoch: 0
release: 5.fc33
summary: Perl interface for cyclic redundancy check generation
url: https://metacpan.org/release/String-CRC32
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-CRC32-1.8-5.fc33.src.rpm
checksum_type: sha256
description:
  This packages provides a perl module to generate checksums from strings and
  from files.

  The checksums are the same as those calculated by ZMODEM, PKZIP, PICCHECK and
  many others.

  There's another perl module called String::CRC, which supports calculation of
  CRC values of various widths (i.e. not just 32 bits), but the generated sums
  differ from those of the programs mentioned above.


pkgId: 6c8031eae94855861d68a82f7bf576afd34e9bc98bf0e3d102dc89abfb5f45ac
name: perl-String-Compare-ConstantTime
arch: src
version: 0.321
epoch: 0
release: 5.fc33
summary: Timing side-channel protected string compare
url: https://metacpan.org/release/String-Compare-ConstantTime
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Compare-ConstantTime-0.321-5.fc33.src.rpm
checksum_type: sha256
description:
  This module provides one function, "equals", which works like perl's "eq", but
  which does not provide a timing side-channel. Such comparison is useful when
  matching against a secret string.


pkgId: 94eb8db5e4519cc911239c2378194972c74adb7d2bf8e2097612db2e5f5d68f7
name: perl-String-Diff
arch: src
version: 0.07
epoch: 0
release: 16.fc33
summary: Simple diff to String
url: https://metacpan.org/release/String-Diff
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Diff-0.07-16.fc33.src.rpm
checksum_type: sha256
description:
  String::Diff is the difference of a consecutive string is made. after
  general diff is done, the difference in the line is searchable.


pkgId: b833797a79dce2314e9bdea5672c8b8285b8d65eeb10c71d0cdd9c0de059ecae
name: perl-String-Dirify
arch: src
version: 1.03
epoch: 0
release: 15.fc33
summary: Convert a string into a directory name
url: https://metacpan.org/release/String-Dirify
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Dirify-1.03-15.fc33.src.rpm
checksum_type: sha256
description:
  This module allows you to convert a string (possibly containing high ASCII
  characters, and even HTML) into another, lower-cased, string which can be
  used as a directory name.


pkgId: 0c3821dac9e58b46eff6ef779d8e172aa726dd6c910cbcddb7da6f22c1c7465f
name: perl-String-Errf
arch: src
version: 0.008
epoch: 0
release: 13.fc33
summary: Simple sprintf-like dialect
url: https://metacpan.org/release/String-Errf
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Errf-0.008-13.fc33.src.rpm
checksum_type: sha256
description:
  String::Errf provides errf, a simple string formatter that works something
  like sprintf. It is implemented using String::Formatter and Sub::Exporter.
  Their documentation may be useful in understanding or extending
  String::Errf.


pkgId: 353fc7c56a2e6733615ed34abd15338eacc25bc191f76d79454e09610aa064d3
name: perl-String-Escape
arch: src
version: 2010.002
epoch: 0
release: 32.fc33
summary: String::Escape Perl module
url: https://metacpan.org/release/String-Escape
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-15.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Escape-2010.002-32.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a flexible calling interface to some frequently-
  performed string conversion functions, including applying and expanding
  standard C/Unix-style backslash escapes like \n and \t, wrapping and
  removing double-quotes, and truncating to fit within a desired length.


pkgId: 970315557962ad81c3d761eef886a330ce7b90b8d014350e85230e53f3bd6a78
name: perl-String-Format
arch: src
version: 1.18
epoch: 0
release: 9.fc33
summary: Sprintf-like string formatting capabilities with arbitrary format definitions
url: https://metacpan.org/release/String-Format
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Format-1.18-9.fc33.src.rpm
checksum_type: sha256
description:
  String::Format lets you define arbitrary printf-like format sequences
  to be expanded. This module would be most useful in configuration
  files and reporting tools, where the results of a query need to be
  formatted in a particular way.


pkgId: 08accab4779245ff0a837281483897f0f91f038e7e1abda6e6d80ca8108cfdb6
name: perl-String-Formatter
arch: src
version: 0.102084
epoch: 0
release: 17.fc33
summary: Build sprintf-like functions of your own
url: https://metacpan.org/release/String-Formatter
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Formatter-0.102084-17.fc33.src.rpm
checksum_type: sha256
description:
  String::Formatter is a tool for building sprintf-like formatting routines.
  It supports named or positional formatting, custom conversions, fixed
  string interpolation, and simple width-matching out of the box. It is easy
  to alter its behavior to write new kinds of format string expanders. For
  most cases, it should be easy to build all sorts of formatters out of the
  options built into String::Formatter.


pkgId: f20f2471518273b5e0766a8edcbf6f5e2ec4f7293a9e860342ea5951d8e4c0f4
name: perl-String-Interpolate-Named
arch: src
version: 1.00
epoch: 0
release: 3.fc33
summary: Interpolated named arguments in string
url: https://metacpan.org/release/String-Interpolate-Named
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Interpolate-Named-1.00-3.fc33.src.rpm
checksum_type: sha256
description:
  String::Interpolate::Named provides a single function, interpolate,
  that takes a string and substitutes named variables by target texts.


pkgId: 7712583910b1fd32f511aec765db497d83e07954d954bcf9bea27321e76e3855
name: perl-String-Print
arch: src
version: 0.94
epoch: 0
release: 3.fc33
summary: Alternative for Perl printf
url: https://metacpan.org/release/String-Print
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Print-0.94-3.fc33.src.rpm
checksum_type: sha256
description:
  This module inserts values into (translated) strings. It provides printf
  and sprintf alternatives via both an object oriented and a functional
  interface. It supports translation, user-defined non-string value
  serialization, user-defined modifiers, and correct Unicode string padding.


pkgId: be5d25b3c2b1f9774c52ebdbaed33c9313bc7fbad93bc49bc0b3ceaf5a6c9854
name: perl-String-ShellQuote
arch: src
version: 1.04
epoch: 0
release: 31.fc33
summary: Perl module for quoting strings for passing through the shell
url: https://metacpan.org/release/String-ShellQuote
rpm_license: (GPL+ or Artistic) and GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-ShellQuote-1.04-31.fc33.src.rpm
checksum_type: sha256
description:
  This package contains a Perl module and a command line utility which
  are useful for quoting strings which are going to pass through the
  shell or a shell-like object.


pkgId: 5757656b0c3cf8c8c7eacede7254797f58fdfd1c5c7944ea8d82263b782c11fa
name: perl-String-Similarity
arch: src
version: 1.04
epoch: 0
release: 30.fc33
summary: Calculates the similarity of two strings
url: https://metacpan.org/release/String-Similarity
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Similarity-1.04-30.fc33.src.rpm
checksum_type: sha256
description:
  The similarity function calculates the similarity index of its two arguments.
  A value of 0 means that the strings are entirely different. A value of 1
  means that the strings are identical. Everything else lies between 0 and 1
  and describes the amount of similarity between the strings.


pkgId: 4f2958693f07641e8ad21826f40c0aa23a79aee80643d096ec5a346f39ece1d8
name: perl-String-ToIdentifier-EN
arch: src
version: 0.12
epoch: 0
release: 10.fc33
summary: Convert Strings to English Program Identifiers
url: https://metacpan.org/release/String-ToIdentifier-EN
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-ToIdentifier-EN-0.12-10.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a utility method, "to_identifier" for converting an
  arbitrary string into a readable representation using the ASCII subset of
  \w for use as an identifier in a computer program. The intent is to make
  unique identifier names from which the content of the original string can
  be easily inferred by a human just by reading the identifier.


pkgId: 1dff6f743a3f461ff2b5aed49a21406d78d5de0a49358c1c4b8ed3eb7d15f470
name: perl-String-Trim
arch: src
version: 0.005
epoch: 0
release: 6.fc33
summary: Trim white space from your strings
url: https://metacpan.org/release/String-Trim
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Trim-0.005-6.fc33.src.rpm
checksum_type: sha256
description:
  String::Trim trims white space off your strings. chomp trims only $/
  (typically, that's a new line), but trim will trim all leading and trailing
  white space.


pkgId: 481dc8192a9572ec3aa0fbebf93cfef3fed1c20323e3918c9fe79df3db000005
name: perl-String-Trim-More
arch: src
version: 0.03
epoch: 0
release: 6.fc33
summary: Various string trimming utilities
url: https://metacpan.org/release/String-Trim-More
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-String-Trim-More-0.03-6.fc33.src.rpm
checksum_type: sha256
description:
  This is an alternative to String::Trim. Instead of a single trim function, this
  module provides several from which you can choose on, depending on your needs.


pkgId: d22dce308876a336eb810b3e902cca256b6dd24e7cb5add906b9ce16327b0d0a
name: perl-Struct-Dumb
arch: src
version: 0.12
epoch: 0
release: 3.fc33
summary: Make simple lightweight record-like structures
url: https://metacpan.org/release/Struct-Dumb
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Struct-Dumb-0.12-3.fc33.src.rpm
checksum_type: sha256
description:
  Struct::Dumb creates record-like structure types, similar to the struct
  keyword in C, C++ or C#, or Record in Pascal. An invocation of this module
  will create a construction function which returns new object references
  with the given field values. These references all respond to lvalue methods
  that access or modify the values stored.


pkgId: 35a6d0c2e0c04455db5a14b51308b25980174e113298b27af3804199c27ecc45
name: perl-Sub-Delete
arch: src
version: 1.00002
epoch: 0
release: 7.fc33
summary: Perl module to delete subroutines
url: https://metacpan.org/release/Sub-Delete
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-01.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Delete-1.00002-7.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Delete provides one function, delete_sub, that deletes the
  subroutine whose name is passed to it. (To load the module without
  importing the function, write use Sub::Delete();.)

  This does more than simply undefine the subroutine in the manner of
  undef &foo, which leaves a stub that can trigger AUTOLOAD (and,
  consequently, won't work for deleting methods). The subroutine is
  completely obliterated from the symbol table (though there may be
  references to it elsewhere, including in compiled code).


pkgId: 1b05407ec1218b2cca05ade4e3c922c577d0b4fc1f5362ba5a906df50488a250
name: perl-Sub-Exporter
arch: src
version: 0.987
epoch: 0
release: 24.fc33
summary: Sophisticated exporter for custom-built routines
url: https://metacpan.org/release/Sub-Exporter
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Exporter-0.987-24.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Exporter provides a sophisticated alternative to Exporter.pm. It allows
  for renaming, currying/sub-generation, and other cool stuff.

  ACHTUNG! If you're not familiar with Exporter or exporting, read
  Sub::Exporter::Tutorial first!


pkgId: a88b263201b5ad4f74617615eeae0c4578d741c95eb5c78f75456a33fa84062e
name: perl-Sub-Exporter-ForMethods
arch: src
version: 0.100052
epoch: 0
release: 16.fc33
summary: Helper routines for using Sub::Exporter to build methods
url: https://metacpan.org/release/Sub-Exporter-ForMethods
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Exporter-ForMethods-0.100052-16.fc33.src.rpm
checksum_type: sha256
description:
  This package provides helper routines for using Sub::Exporter to build methods
  that won't be removed by namespace::autoclean.


pkgId: cd8d9f9344f965ecb089c5ea32e18cf277c8a8dc183df08ad2d2e235f82589c0
name: perl-Sub-Exporter-Lexical
arch: src
version: 0.092292
epoch: 0
release: 13.fc33
summary: Export lexically-available subs with Sub::Exporter
url: https://metacpan.org/release/Sub-Exporter-Lexical
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Exporter-Lexical-0.092292-13.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Exporter::Lexical provides an alternate installer for Sub::Exporter.
  Installers are documented in Sub::Exporter's documentation; all you need to
  know is that by using Sub::Exporter::Lexical's installer, you can import
  routines into a lexical scope that will be cleaned up when that scope ends.


pkgId: 0641bf4aa2bbb89f34cb168d7d6d0391422cc06d67ab23d21cd74d278b893ba1
name: perl-Sub-Exporter-Progressive
arch: src
version: 0.001013
epoch: 0
release: 13.fc33
summary: Only use Sub::Exporter if you need it
url: https://metacpan.org/release/Sub-Exporter-Progressive
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Exporter-Progressive-0.001013-13.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Exporter is an incredibly powerful module, but with that power comes
  great responsibility, er- as well as some runtime penalties. This module is a
  Sub::Exporter wrapper that will let your users just use Exporter if all they
  are doing is picking exports, but use Sub::Exporter if your users try to use
  Sub::Exporter's more advanced features, like renaming exports, if they try to
  use them.

  Note that this module will export @EXPORT and @EXPORT_OK package variables for
  Exporter to work. Additionally, if your package uses advanced Sub::Exporter
  features like currying, this module will only ever use Sub::Exporter, so you
  might as well use it directly.


pkgId: aa8b92dc1617cbe61236cb264ad60226b2260bc5db9dd01559a15fa3de857abc
name: perl-Sub-Identify
arch: src
version: 0.14
epoch: 0
release: 14.fc33
summary: Retrieve names of code references
url: https://metacpan.org/release/Sub-Identify
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Identify-0.14-14.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Identify allows you to retrieve the real name of code references. For
  this, it uses Perl's introspection mechanism, provided by the B module.


pkgId: dd91d5acf9c0046056e1ec2b6a32df7af717e82da5ddd09abae964ef877bb834
name: perl-Sub-Infix
arch: src
version: 0.004
epoch: 0
release: 12.fc33
summary: Create a fake infix operator
url: https://metacpan.org/release/Sub-Infix
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Infix-0.004-12.fc33.src.rpm
checksum_type: sha256
description:
  Sub::Infix creates fake infix operators using overloading. It doesn't use
  source filters, or Devel::Declare, or any of that magic.


pkgId: 6ddab307da20bfd958308312c94f02321d8986308539cbc4e3d1a0115c984ca7
name: perl-Sub-Install
arch: src
version: 0.928
epoch: 0
release: 25.fc33
summary: Install subroutines into packages easily
url: https://metacpan.org/release/Sub-Install
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Install-0.928-25.fc33.src.rpm
checksum_type: sha256
description:
  This module makes it easy to install subroutines into packages without the
  unsightly mess of no strict or typeglobs lying about where just anyone
  can see them.


pkgId: 6a631b649a54e851fee95070201da68f0cdec7a4a04b49f9a3b9ed4d05120470
name: perl-Sub-Name
arch: src
version: 0.26
epoch: 0
release: 4.fc33
summary: Name - or rename - a sub
url: https://metacpan.org/release/Sub-Name
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Name-0.26-4.fc33.src.rpm
checksum_type: sha256
description:
  This module allows one to "name" or rename subroutines, including anonymous
  ones.

  Note that this is mainly for aid in debugging; you still cannot call the sub
  by the new name (without some deep magic).


pkgId: 5dcb3b0db6315271c589d7ec2c757b2d4b5988fc6c5febf2e6a36b645d0718ea
name: perl-Sub-Prototype
arch: src
version: 0.03
epoch: 0
release: 5.fc33
summary: Allows you to set a subs prototype
url: https://metacpan.org/release/Sub-Prototype
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Prototype-0.03-5.fc33.src.rpm
checksum_type: sha256
description:
  This modules allows you to set a subs prototype. It only has one function,
  which is exported by default.


pkgId: 48268eef1e16153b61197d303fc4667f37b526326e065a80edde5db9cf581626
name: perl-Sub-Uplevel
arch: src
version: 0.2800
epoch: 1
release: 12.fc33
summary: Apparently run a function in a higher stack frame
url: https://metacpan.org/release/Sub-Uplevel
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-03.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-Uplevel-0.2800-12.fc33.src.rpm
checksum_type: sha256
description:
  Like Tcl's uplevel() function, but not quite so dangerous. The idea is
  just to fool caller(). All the really naughty bits of Tcl's uplevel()
  are avoided.


pkgId: c25a3dfa5c2d49a7980d6bb7a7ece56eb0608d4bf1ccd8b2296a27afc5cd8cdb
name: perl-Sub-WrapPackages
arch: src
version: 2.01
epoch: 0
release: 10.fc33
summary: Add wrappers around all the subroutines in packages
url: https://metacpan.org/release/Sub-WrapPackages
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sub-WrapPackages-2.01-10.fc33.src.rpm
checksum_type: sha256
description:
  This is mostly a wrapper around Damian Conway's Hook::LexWrap module. This
  module allows you to wrap function calls and exits with functions of your
  choice.


pkgId: 2bb8fb3258bffd88bdfc8ae1b53c3c3038c0856a2a13266c9587b36767cd0fb1
name: perl-Swim
arch: src
version: 0.1.48
epoch: 0
release: 4.fc33
summary: See What I Mean is a plain text markup language
url: https://metacpan.org/release/Swim
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Swim-0.1.48-4.fc33.src.rpm
checksum_type: sha256
description:
  Swim (See What I Mean) is a plain text markup language that converts to many
  formats: HTML, MarkDown, POD, Formatted Plain Text, LaTeX, DocBook, roff,
  AsciiDoc, MediaWiki. The Swim framework is easily extensible, so adding new
  outputs is easy.


pkgId: 1413568ba37cceae57f4f27fd02d5daa495ac4c5f92772e1a9090d94db10dc32
name: perl-Switch
arch: src
version: 2.17
epoch: 0
release: 20.fc33
summary: A switch statement for Perl
url: https://metacpan.org/release/Switch
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Switch-2.17-20.fc33.src.rpm
checksum_type: sha256
description:
  Switch.pm provides the syntax and semantics for an explicit case mechanism for
  Perl. The syntax is minimal, introducing only the keywords C<switch> and
  C<case> and conforming to the general pattern of existing Perl control
  structures. The semantics are particularly rich, allowing any one (or more) of
  nearly 30 forms of matching to be used when comparing a switch value with its
  various cases.


pkgId: 8b54fb25b2654dbe42dae53c00d8ccfcbd4d69c530b1d1e2a0200e902db06caf
name: perl-Syntax-Feature-Loop
arch: src
version: 1.8.0
epoch: 0
release: 11.fc33
summary: Provides the loop BLOCK syntax for unconditional loops
url: https://metacpan.org/release/Syntax-Feature-Loop
rpm_license: CC0 and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Feature-Loop-1.8.0-11.fc33.src.rpm
checksum_type: sha256
description:
  Syntax::Feature::Loop is a lexically-scoped pragma that provides the loop
  BLOCK syntax for unconditional loops.


pkgId: 9f49340f1b2506320bf81639405ccc731ebf117e47bbdc758ace9e9f24595c28
name: perl-Syntax-Highlight-Engine-Kate
arch: src
version: 0.14
epoch: 0
release: 10.fc33
summary: Port to Perl of the syntax highlight engine of the Kate text editor
url: https://metacpan.org/release/Syntax-Highlight-Engine-Kate
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Highlight-Engine-Kate-0.14-10.fc33.src.rpm
checksum_type: sha256
description:
  Syntax::Highlight::Engine::Kate is a port to perl of the syntax highlight
  engine of the Kate text editor.


pkgId: aec972c3e442f63dd13f3b94fef72c8fb3140dedae8083eb552ba38862fc98ee
name: perl-Syntax-Highlight-Perl-Improved
arch: src
version: 1.01
epoch: 0
release: 32.fc33
summary: Highlighting of Perl Syntactical Structures
url: https://metacpan.org/release/Syntax-Highlight-Perl-Improved
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Highlight-Perl-Improved-1.01-32.fc33.src.rpm
checksum_type: sha256
description:
  This module provides syntax highlighting for Perl code. The design bias is
  roughly line-oriented and streamed (i.e. processing a file line-by-line in a
  single pass). Provisions may be made in the future for tasks related to "back-
  tracking" (i.e. re-doing a single line in the middle of a stream) such as
  speeding up state copying.


pkgId: a7ee8351c4efd519c23a7345ddda4aa66a1b873744153b228f8fe30c8b01a403
name: perl-Syntax-Highlight-Perl6
arch: src
version: 0.88
epoch: 0
release: 28.fc33
summary: Perl 6 Syntax Highlighter
url: https://metacpan.org/release/Syntax-Highlight-Perl6
rpm_license: (GPL+ or Artistic) and Artistic 2.0 and (MIT or GPLv2)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Highlight-Perl6-0.88-28.fc33.src.rpm
checksum_type: sha256
description:
  Syntax::Highlight::Perl6 parses Perl 6 source code using an embedded
  STD.pm. It matches parse tree nodes to colors then returns them in
  different output formats. It can be used to create web pages with colorful
  source code samples in its simple and snippet HTML modes, or it can be used
  as a learning tool in examining STD.pm's output using the JavaScript node
  viewer in its full HTML mode. Or you can use its parse tree Perl 5 records
  to build your next great idea.


pkgId: 5681f47b7f0316f43ca1e407ea908b85e70104bd7667cc22edff98e8a9ccc67f
name: perl-Syntax-Keyword-Dynamically
arch: src
version: 0.05
epoch: 0
release: 2.fc33
summary: Dynamically change the value of a variable
url: https://metacpan.org/release/Syntax-Keyword-Dynamically
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Keyword-Dynamically-0.05-2.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module provides a syntax plugin that implements a single keyword,
  dynamically, which alters the behavior of a scalar assignment operation.
  Syntactically and semantically it is similar to the built-in Perl keyword
  local, but is implemented somewhat differently to give two key advantages over
  regular local: You can dynamically assign to left-value functions and
  accessors, and you can dynamically assign to regular lexical variables.


pkgId: 2ae13c1d999b7fe56ecd2ed7531f17d8be9124e715bc9b24594ada5e9ff8024f
name: perl-Syntax-Keyword-Gather
arch: src
version: 1.003002
epoch: 0
release: 9.fc33
summary: Implements the Perl 6 'gather/take' control structure in Perl 5
url: https://metacpan.org/release/Syntax-Keyword-Gather/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Keyword-Gather-1.003002-9.fc33.src.rpm
checksum_type: sha256
description:
  Perl 6 provides a new control structure -- gather -- that allows lists to
  be constructed procedurally, without the need for a temporary variable.
  Within the block/closure controlled by a gather any call to take pushes
  that call's argument list to an implicitly created array. take returns the
  number of elements it took. This module implements that control structure.


pkgId: 5919f31e6fd4485ec9435c45d180c7db83a179183c7a161ad5d5cafde1604374
name: perl-Syntax-Keyword-Junction
arch: src
version: 0.003008
epoch: 0
release: 18.fc33
summary: Perl6 style Junction operators in Perl5
url: https://metacpan.org/release/Syntax-Keyword-Junction
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Keyword-Junction-0.003008-18.fc33.src.rpm
checksum_type: sha256
description:
  This is a lightweight module which provides 'Junction' operators, the most
  commonly used being any and all. Inspired by the Perl6 design docs,
  <http://dev.perl.org/perl6/doc/design/exe/E06.html>.


pkgId: 318e6c5f16becb71fa5478208591bb764c18cf633bb8aba92d212a88e6203bc8
name: perl-Syntax-Keyword-Try
arch: src
version: 0.18
epoch: 0
release: 1.fc33
summary: try/catch/finally syntax for perl
url: https://metacpan.org/release/Syntax-Keyword-Try/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Syntax-Keyword-Try-0.18-1.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a syntax plugin that implements exception-handling
  semantics in a form familiar to users of other languages, being built on a
  block labeled with the try keyword, followed by at least one of a catch or
  finally block.


pkgId: 0b05a4dad2b9ae2bc2fc7183889dbccfcb0f4828bdb38ed5e13c8d3411dd310e
name: perl-Sys-Detect-Virtualization
arch: src
version: 0.107
epoch: 0
release: 22.fc33
summary: Library to detect if a UNIX system is running as a virtual machine
url: https://metacpan.org/release/Sys-Detect-Virtualization
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Detect-Virtualization-0.107-22.fc33.src.rpm
checksum_type: sha256
description:
  This module attempts to detect whether or not a system is running as a
  guest under virtualization, using various heuristics.


pkgId: e70e8418949c9ef1964d602527ba7c394cd8cd778707edbf573a24351ae3aea7
name: perl-Sys-Hostname-Long
arch: src
version: 1.5
epoch: 0
release: 19.fc33
summary: Try every conceivable way to get full hostname
url: https://metacpan.org/release/Sys-Hostname-Long
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-39.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Hostname-Long-1.5-19.fc33.src.rpm
checksum_type: sha256
description:
  Attempt via many methods to get the system's full name. The Sys::Hostname
  class is the best and standard way to get the system hostname. However,
  it is missing the long hostname.


pkgId: 5bfe5674cc6c9cc32e2b952d7ce4fcc322b97f2b60cde45a6eb56d7b3c9261a7
name: perl-Sys-MemInfo
arch: src
version: 0.99
epoch: 0
release: 14.fc33
summary: Memory information as Perl module
url: https://metacpan.org/release/Sys-MemInfo
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-MemInfo-0.99-14.fc33.src.rpm
checksum_type: sha256
description:
  Sys::MemInfo returns the total amount of free and used physical memory in
  bytes in totalmem and freemem variables.


pkgId: 4fd1a12e5c170da80839284b03a0828333b4a109b386e07e1a0a333a0dcfcb12
name: perl-Sys-Mmap
arch: src
version: 0.20
epoch: 0
release: 4.fc33
summary: Use mmap to map in a file as a Perl variable
url: https://metacpan.org/release/Sys-Mmap
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Mmap-0.20-4.fc33.src.rpm
checksum_type: sha256
description:
  The Mmap module lets you use mmap to map in a file as a perl variable rather
  than reading the file into dynamically allocated memory.  Multiple programs may
  map the same file into memory, and immediately see changes by each other.
  Memory may be allocated not attached to a file, and shared with sub-processes.


pkgId: 3fa300572930b72171bd829d1b38e989874102d78a6839d6ca852e3f98bf1dc7
name: perl-Sys-SigAction
arch: src
version: 0.23
epoch: 0
release: 13.fc33
summary: Perl extension for Consistent Signal Handling
url: https://metacpan.org/release/Sys-SigAction
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-SigAction-0.23-13.fc33.src.rpm
checksum_type: sha256
description:
  Sys::SigAction provides EASY access to POSIX::sigaction() for signal
  handling on systems that support sigaction().
  It is hoped that with the use of this module, your signal handling
  behavior can be coded in a way that does not change from one perl
  version to the next, and that sigaction() will be easier for you to use.


pkgId: 3aa7f76ee10397aa283e23c09098d4dd1ca53f774ded30435b36f9df4d3f01a7
name: perl-Sys-Statistics-Linux
arch: src
version: 0.66
epoch: 0
release: 23.fc33
summary: Front-end module to collect system statistics
url: https://metacpan.org/release/Sys-Statistics-Linux
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Statistics-Linux-0.66-23.fc33.src.rpm
checksum_type: sha256
description:
  Sys::Statistics::Linux is a front-end module and gather different linux
  system information like processor workload, memory usage, network and disk
  statistics and a lot more. Refer the documentation of the distribution
  modules to get more information about all possible statistics.


pkgId: de373fe0bc678f688257b47498a49e45e5c29bb1f6a9615aafbd69ad7152b853
name: perl-Sys-Syscall
arch: src
version: 0.25
epoch: 0
release: 24.fc33
summary: Access system calls that Perl doesn't normally provide access to
url: https://metacpan.org/release/Sys-Syscall
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Syscall-0.25-24.fc33.src.rpm
checksum_type: sha256
description:
  Use epoll, sendfile, from Perl. Mostly Linux-only support now, but more
  syscalls/OSes planned for future.


pkgId: c2bc0f0b9e3e06ae6319fb3ceda122898d536a02745539e65f1222d1db6e1907
name: perl-Sys-Syslog
arch: src
version: 0.36
epoch: 0
release: 458.fc33
summary: Perl interface to the UNIX syslog(3) calls
url: https://metacpan.org/release/Sys-Syslog
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Syslog-0.36-458.fc33.src.rpm
checksum_type: sha256
description:
  Sys::Syslog is an interface to the UNIX syslog(3) function. Call syslog() with
  a string priority and a list of printf() arguments just like at syslog(3).


pkgId: 59078914778de0a762ae6e59cea800b401fa77b68e3c0bba0cd7897c7a2e2137
name: perl-Sys-Virt
arch: src
version: 6.3.0
epoch: 0
release: 3.fc33
summary: Represent and manage a libvirt hypervisor connection
url: https://metacpan.org/release/Sys-Virt
rpm_license: GPLv2+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Virt-6.3.0-3.fc33.src.rpm
checksum_type: sha256
description:
  The Sys::Virt module provides a Perl XS binding to the libvirt virtual
  machine management APIs. This allows machines running within arbitrary
  virtualization containers to be managed with a consistent API.


pkgId: d990ec3e96987d614322fe160fa7cd932061671d327eba0053cc0dffd57eadac
name: perl-Sys-Virt-TCK
arch: src
version: 1.1.0
epoch: 0
release: 7.fc33
summary: Sys::Virt::TCK - libvirt Technology Compatibility Kit
url: http://libvirt.org/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sys-Virt-TCK-1.1.0-7.fc33.src.rpm
checksum_type: sha256
description:
  Sys::Virt::TCK provides an integration test suite for validating
  correct operation of libvirt drivers with underlying virtualization
  technology.


pkgId: 8738dca608386f92b166abc1e0b29b3905665c85510427dd5a411dbdf8c31626
name: perl-Sysadm-Install
arch: src
version: 0.48
epoch: 0
release: 13.fc33
summary: Typical installation tasks for system administrators
url: https://metacpan.org/release/Sysadm-Install
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-34.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Sysadm-Install-0.48-13.fc33.src.rpm
checksum_type: sha256
description:
  "Sysadm::Install" executes shell-like commands performing typical
  installation tasks: Copying files, extracting tarballs, calling "make".
  It has a "fail once and die" policy, meticulously checking the result of
  every operation and calling "die()" immediately if anything fails,
  with optional logging of everything.

  "Sysadm::Install" also supports a *dry_run* mode, in which it logs
  everything, but suppresses any write actions.


pkgId: ebee6db74547bfad279d68590a72b86106cc2a26dd6d66af9cb4a7d37de13641
name: perl-System-Command
arch: src
version: 1.121
epoch: 0
release: 3.fc33
summary: Object for running system commands
url: https://metacpan.org/release/System-Command
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-System-Command-1.121-3.fc33.src.rpm
checksum_type: sha256
description:
  System::Command is a class that launches external system commands and
  return an object representing them, allowing to interact with them through
  their STDIN, STDOUT and STDERR handles.


pkgId: ffdfa55e853c0e9e8abffb7e74f9bd48606a003ab9d122d19effdaae75bc8ea2
name: perl-System-Info
arch: src
version: 0.059
epoch: 0
release: 5.fc33
summary: Factory for system specific information objects
url: https://metacpan.org/release/System-Info
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-System-Info-0.059-5.fc33.src.rpm
checksum_type: sha256
description:
  System::Info tries to present system-related information, like number of
  CPU's, architecture, OS and release related information in a system-
  independent way. This releases the user of this module of the need to know
  if the information comes from Windows, Linux, HP-UX, AIX, Solaris, Irix, or
  VMS, and if the architecture is i386, x64, pa-risc2, or arm.


pkgId: da0d22be24cd7403106f2308b4bfcf261c47b39002399e0de1ed1bc0b429cc93
name: perl-SystemC-Vregs
arch: src
version: 1.470
epoch: 0
release: 23.fc33
summary: Utility routines used by vregs
url: https://metacpan.org/release/SystemC-Vregs
rpm_license: LGPLv3+ or Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-SystemC-Vregs-1.470-23.fc33.src.rpm
checksum_type: sha256
description:
  A Vregs object contains a documentation "package" containing enumerations,
  definitions, classes, and registers.


pkgId: dfb83845bde0d705aae221e3f0d875e6e4a94365556dfce5e042976ed5f85154
name: perl-TAP-Formatter-HTML
arch: src
version: 0.11
epoch: 0
release: 22.fc33
summary: TAP Test Harness output delegate for html output
url: https://metacpan.org/release/TAP-Formatter-HTML
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TAP-Formatter-HTML-0.11-22.fc33.src.rpm
checksum_type: sha256
description:
  This module provides HTML output formatting for TAP::Harness (a replacement
  for Test::Harness. It is largely based on ideas from TAP::Test::HTMLMatrix
  (which was built on Test::Harness and thus had a few limitations - hence
  this module). For sample output, see:


pkgId: e113b7b35e2e96b60dbe41029291a578962aac9413cc77444265054a810dda7c
name: perl-TAP-Harness-Archive
arch: src
version: 0.18
epoch: 0
release: 15.fc33
summary: Create an archive of TAP test results
url: https://metacpan.org/release/TAP-Harness-Archive
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TAP-Harness-Archive-0.18-15.fc33.src.rpm
checksum_type: sha256
description:
  This module is a direct subclass of TAP::Harness and behaves in exactly the
  same way except for one detail. In addition to outputting a running progress
  of the tests and an ending summary it can also capture all of the raw TAP
  from the individual test files or streams into an archive file (.tar or
  .tar.gz).


pkgId: f0b7155266b388365aa8d863610d12e0716d458a8f8d704a21ec3c17df30dc11
name: perl-TAP-Harness-JUnit
arch: src
version: 0.42
epoch: 0
release: 17.fc33
summary: Generate JUnit compatible output from TAP results
url: https://metacpan.org/release/TAP-Harness-JUnit
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TAP-Harness-JUnit-0.42-17.fc33.src.rpm
checksum_type: sha256
description:
  The only difference between this module and TAP::Harness is that this adds
  mandatory 'xmlfile' argument, that causes the output to be formatted into
  XML in format similar to one that is produced by JUnit testing framework.


pkgId: 090bfc19a4fcf430393d240401f55c93e70f92a88f22cdc462c06a9f848535e9
name: perl-TAP-Harness-Multiple
arch: src
version: 0.07
epoch: 0
release: 24.fc33
summary: TAP::Harness::Multiple Perl module
url: https://metacpan.org/release/TAP-Harness-Multiple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TAP-Harness-Multiple-0.07-24.fc33.src.rpm
checksum_type: sha256
description:
  This module includes packages for extending the functionality of the
  TAP::Harness and TAP::Harness::Archive modules from CPAN.


pkgId: de8023a0bb0445acda20eefbf9ddf8f2b2c3af8f1eed082c3acb900654a82ecc
name: perl-TAP-SimpleOutput
arch: src
version: 0.009
epoch: 0
release: 12.fc33
summary: Simple closure-driven TAP generator
url: https://metacpan.org/release/TAP-SimpleOutput
rpm_license: LGPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TAP-SimpleOutput-0.009-12.fc33.src.rpm
checksum_type: sha256
description:
  We provide one function, counters(), that returns a number of simple closures
  designed to help output TAP easily and correctly, with a minimum of fuss.


pkgId: e54eb7632b0c14dd6d6843231eb82252894667d224a009d03588b47954111c39
name: perl-Taint-Runtime
arch: src
version: 0.03
epoch: 0
release: 40.fc33
summary: Runtime enable taint checking
url: https://metacpan.org/release/Taint-Runtime
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Taint-Runtime-0.03-40.fc33.src.rpm
checksum_type: sha256
description:
  This module enables run-time taint checking, for cases where the -T
  switch on the command line is not appropriate or viable. There are
  a somewhat limited number of legitimate use cases where you should
  use this module instead of the -T switch. Unless you have a specific and
  good reason for not using the -T option, you should use the -T option.


pkgId: 2f79415edbac71b7e806ddb7affd4f1d2c709a937e9fb097b9d0783a21c4d246
name: perl-Taint-Util
arch: src
version: 0.08
epoch: 0
release: 25.fc33
summary: Test for and flip the taint flag without regex matches or eval
url: https://metacpan.org/release/Taint-Util
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Taint-Util-0.08-25.fc33.src.rpm
checksum_type: sha256
description:
  Wraps perl's internal routines for checking and setting the taint flag and
  thus does not rely on regular expressions for untainting or odd tricks
  involving eval and kill for checking whether data is tainted; instead, it
  checks and flips a flag on the scalar in-place.


pkgId: 2a7f134abfbf76e250a1976035c23dbb0b3ad4a61b63566fe073bfdc98e6abdb
name: perl-Tangerine
arch: src
version: 0.23
epoch: 0
release: 13.fc33
summary: Analyse perl files and report module-related information
url: https://metacpan.org/release/Tangerine
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-07.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Tangerine-0.23-13.fc33.src.rpm
checksum_type: sha256
description:
  Tangerine statically analyses perl files and reports various information
  about provided, used (compile-time dependencies) and required (runtime
  dependencies) modules.


pkgId: 8953589699029a215bc0ac725b1c741016f54e262e94dce8726ddd8c1d20dcdb
name: perl-Tapper
arch: src
version: 4.1.1
epoch: 0
release: 22.fc33
summary: A flexible and open test infrastructure
url: https://metacpan.org/release/Tapper
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Tapper-4.1.1-22.fc33.src.rpm
checksum_type: sha256
description:
  Tapper is a modular, flexible and open test infrastructure. Its only primary
  assumption is the ubiquitous use of the Test Anything Protocol (TAP).
  Internally it is based on technology known from the CPAN testing
  infrastructure, extending it with automation and advanced querying.


pkgId: 78286bc221bff3b8c00e43a80ff95ed0379ff4f99495571693b65fbc2011e0ff
name: perl-Task-Catalyst
arch: src
version: 4.02
epoch: 0
release: 25.fc33
summary: All you need to start with Catalyst
url: https://metacpan.org/release/Task-Catalyst
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Task-Catalyst-4.02-25.fc33.src.rpm
checksum_type: sha256
description:
  This package ensures everything you need to write serious Catalyst
  applications is installed.  Install this if you're interested in
  developing Catalyst apps.


pkgId: 4a1ed3e68f96312fa9f72afc9664ef365721540bccfab85da09f0396e8ef168b
name: perl-Task-Kensho-Async
arch: src
version: 0.40
epoch: 0
release: 7.fc33
summary: Glimpse at an Enlightened Perl (Async Programming)
url: https://metacpan.org/release/Task-Kensho-Async
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-34.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Task-Kensho-Async-0.40-7.fc33.src.rpm
checksum_type: sha256
description:
  Task::Kensho is a list of recommended modules for Enlightened Perl
  development. CPAN is wonderful, but there are too many wheels and you have
  to pick and choose amongst the various competing technologies.


pkgId: 1a7900f38c9517abb617252547fdb707d073a94b3c100f5d1cd4f1aafc4066c2
name: perl-Task-Weaken
arch: src
version: 1.06
epoch: 0
release: 9.fc33
summary: Ensure that a platform has weaken support
url: https://metacpan.org/release/Task-Weaken
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Task-Weaken-1.06-9.fc33.src.rpm
checksum_type: sha256
description:
  One recurring problem in modules that use Scalar::Util's weaken function is
  that it is not present in the pure-perl variant.

  This restores the functionality testing to a dependency you do once in
  your Makefile.PL, rather than something you have to write extra tests
  for each time you write a module.


pkgId: c91e51b53026a3483388f8a0d5014351cb2700e9e1db9f8ec379f98a9b4dec93
name: perl-TeX-Encode
arch: src
version: 2.009
epoch: 0
release: 3.fc33
summary: Encoding to LaTeX escapes
url: https://metacpan.org/release/TeX-Encode
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TeX-Encode-2.009-3.fc33.src.rpm
checksum_type: sha256
description:
  This module provides encoding to LaTeX escapes from utf8 using mapping tables
  in Pod::LaTeX and HTML::Entities. This covers only a subset of the Unicode
  character table (undefined warnings will occur for non-mapped chars).

  Mileage will vary when decoding (converting LaTeX to utf8), as LaTeX is in
  essence a programming language, and this module does not implement LaTeX.


pkgId: c5226d09e1d11bd3495ffa8a41841a429ca55c94153622a402d0246e6344dc21
name: perl-Template-Alloy
arch: src
version: 1.020
epoch: 0
release: 19.fc33
summary: Templating tool supporting multiple markup formats
url: https://metacpan.org/release/Template-Alloy
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Alloy-1.020-19.fc33.src.rpm
checksum_type: sha256
description:
  "An alloy is a homogeneous mixture of two or more elements"
  (http://en.wikipedia.org/wiki/Alloy).

  Template::Alloy represents the mixing of features and capabilities from all of
  the major mini-language based template systems (support for non-mini-language
  based systems will happen eventually).  With Template::Alloy you can use your
  favorite template interface and syntax and get features from each of the other
  major template systems.  And Template::Alloy is fast - whether you're using
  mod_perl, CGI, or running from the command line.  There is even
  Template::Alloy::XS for getting a little more speed when that is necessary.


pkgId: 6dabaa9673ff5165000b54903c892b1b8f914cd82ca546e761a2c10a49707995
name: perl-Template-GD
arch: src
version: 2.66
epoch: 0
release: 37.fc33
summary: GD plugin(s) for the Template Toolkit
url: https://metacpan.org/release/Template-GD
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-GD-2.66-37.fc33.src.rpm
checksum_type: sha256
description:
  The Template-GD distribution provides a number of Template Toolkit
  plugin modules to interface with Lincoln Stein's GD modules.  These in
  turn provide an interface to Thomas Boutell's GD graphics library.

  These plugins were distributed as part of the Template Toolkit until
  version 2.15 released in February 2006.  At this time they were
  extracted into this separate distribution.


pkgId: ebf099e78e36b82c70752e30cdc4ad14325f3a4384b216cd148bd71039536929
name: perl-Template-Multilingual
arch: src
version: 1.00
epoch: 0
release: 7.fc33
summary: Multilingual templates for Template Toolkit
url: https://metacpan.org/release/Template-Multilingual
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Multilingual-1.00-7.fc33.src.rpm
checksum_type: sha256
description:
  This subclass of Template Toolkit's Template class supports multilingual
  templates: templates that contain text in several languages.


pkgId: f7123cebd530ae2c02ff6b9059b99eef79448794c27e7dd412de3b5c2de91b17
name: perl-Template-Plugin-Cycle
arch: src
version: 1.06
epoch: 0
release: 31.fc33
summary: Cyclically insert into a Template from a sequence of values
url: https://metacpan.org/release/Template-Plugin-Cycle
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Plugin-Cycle-1.06-31.fc33.src.rpm
checksum_type: sha256
description:
  Sometimes, apparently almost exclusively when doing alternating table row
  backgrounds, you need to print an alternating, cycling, set of values into
  a template.

  Template::Plugin::Cycle is a small, simple, and hopefully DWIM solution to
  these sorts of tasks.


pkgId: c403e3cbb58462ef2cfcdbc04a6ba6af6d0a199fced3fda4a09220a4e0631b14
name: perl-Template-Plugin-HTML-Strip
arch: src
version: 0.01
epoch: 0
release: 13.fc33
summary: HTML::Strip filter for Template Toolkit
url: https://metacpan.org/release/Template-Plugin-HTML-Strip
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-20.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Plugin-HTML-Strip-0.01-13.fc33.src.rpm
checksum_type: sha256
description:
  This module is a Template Toolkit dynamic filter, which uses HTML::Strip to
  remove markup (primarily HTML, but also SGML, XML, etc) from filtered
  content during template processing.


pkgId: b24868a8ad9ca0c372744a40b88af3650751b51ec7d990dcc40ed0d6494fb7ef
name: perl-Template-Plugin-JavaScript
arch: src
version: 0.02
epoch: 0
release: 26.fc33
summary: Encodes text to be safe in JavaScript
url: https://metacpan.org/release/Template-Plugin-JavaScript
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Plugin-JavaScript-0.02-26.fc33.src.rpm
checksum_type: sha256
description:
  Template::Plugin::JavaScript is a TT filter that filters text so it can
  be safely used in JavaScript quotes. e.g:

    [% USE JavaScript %]
    document.write("[% FILTER js %] Here's some text going on. [% END %]");

  will become:

    document.write("\nHere\'s some text going on.\n");


pkgId: c81ba3841bd10d87caeb476a2e061198469eddea18e255d9199e2a9523415221
name: perl-Template-Provider-Encoding
arch: src
version: 0.10
epoch: 0
release: 35.fc33
summary: Explicitly declare encodings of your templates
url: https://metacpan.org/release/Template-Provider-Encoding
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-10.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Provider-Encoding-0.10-35.fc33.src.rpm
checksum_type: sha256
description:
  Template::Provider::Encoding is a Template Provider subclass to decode
  template using its declaration. You have to declare encoding of the
  template in the 1st line of the template using the (fake) encoding TT
  plugin; otherwise the template is handled as utf-8.


pkgId: 4eec2874e119c79225c28e579fd496d60a658de093bfd79ddb2b48ac646bd26b
name: perl-Template-Timer
arch: src
version: 1.00
epoch: 0
release: 31.fc33
summary: Template::Timer Perl module
url: https://metacpan.org/release/Template-Timer
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Timer-1.00-31.fc33.src.rpm
checksum_type: sha256
description:
  Template::Timer provides inline timings of the template processing
  througout your code.  It's an overridden version of Template::Context that
  wraps the process() and include() methods.


pkgId: 005e8d03ff72ff7004eaf27b685c42b0c1698146de92e2459076fbf02e059582
name: perl-Template-Tiny
arch: src
version: 1.12
epoch: 0
release: 26.fc33
summary: Template Toolkit re-implemented in as little code as possible
url: https://metacpan.org/release/Template-Tiny
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-33.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Tiny-1.12-26.fc33.src.rpm
checksum_type: sha256
description:
  WARNING: THIS MODULE IS EXPERIMENTAL AND SUBJECT TO CHANGE WITHOUT NOTICE
  Template::Tiny is a re-implementation of a partial subset of the Template
  Toolkit,  in as few lines of code as possible. It is intended for use in
  light-usage, low-memory, or low-CPU templating situations, where you may
  need to upgrade to the full feature set in the future, or if you want the
  familiarity of TT-style templates. It is intended to have fully-compatible
  template and stash usage, with a limited by similar Perl API. Unlike
  Template Toolkit, Template::Tiny will process templates without a compile
  phase (but despite this is still quicker, owing to heavy use of the Perl
  regular expression engine.


pkgId: 3a7074edb8f2a938a76c646b4e7a84c4058b3bf5dbba2a780df94978bfca889c
name: perl-Template-Toolkit
arch: src
version: 3.009
epoch: 0
release: 2.fc33
summary: Template processing system
url: http://www.template-toolkit.org/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Toolkit-3.009-2.fc33.src.rpm
checksum_type: sha256
description:
  The Template Toolkit is a collection of modules which implement a
  fast, flexible, powerful and extensible template processing system.
  It was originally designed and remains primarily useful for generating
  dynamic web content, but it can be used equally well for processing
  any other kind of text based documents: HTML, XML, POD, PostScript,
  LaTeX, and so on.


pkgId: e2006b84b11a5d6cae08a27d366c3ebd202613ed8009e145230134df3c4bf146
name: perl-Template-Toolkit-Simple
arch: src
version: 0.31
epoch: 0
release: 24.fc33
summary: Simple interface to Template Toolkit
url: https://metacpan.org/release/Template-Toolkit-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-24.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Template-Toolkit-Simple-0.31-24.fc33.src.rpm
checksum_type: sha256
description:
  This Perl module is a simple wrapper around Template Toolkit. It exports
  a function called `tt' which returns a new Template::Toolkit::Simple object.
  The object supports method calls for setting all the Template Toolkit options.

  This module also installs a program called `tt-render' which you can use from
  the command line to render templates with all the power of the Perl object.
  All of the object methods become command line arguments in the command line
  version.


pkgId: 1e1acd97d3ccb70ca42892cadbc0fd00e6376f8f984f7928d70cead92c3e5a81
name: perl-Term-ANSIColor
arch: src
version: 5.01
epoch: 0
release: 458.fc33
summary: Color screen output using ANSI escape sequences
url: https://metacpan.org/release/Term-ANSIColor
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ANSIColor-5.01-458.fc33.src.rpm
checksum_type: sha256
description:
  This module has two interfaces, one through color() and colored() and the
  other through constants. It also offers the utility functions uncolor(),
  colorstrip(), colorvalid(), and coloralias(), which have to be explicitly
  imported to be used.


pkgId: ed3a7fe4ca690b2744d58cf5fd0d235d8fb73cf4214b92ea4457fda6eb8dccff
name: perl-Term-Animation
arch: src
version: 2.6
epoch: 0
release: 36.fc33
summary: ASCII sprite animation framework
url: https://metacpan.org/release/Term-Animation
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-14.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Animation-2.6-36.fc33.src.rpm
checksum_type: sha256
description:
  This module provides a framework to produce sprite animations using ASCII art.
  Each ASCII 'sprite' is given one or more frames, and placed into the animation
  as an 'animation object'. An animation object can have a callback routine that
  controls the position and frame of the object.

  If the constructor is passed no arguments, it assumes that it is running full
  screen, and behaves accordingly. Alternatively, it can accept a curses window
  (created with the Curses new win call) as an argument, and will draw into that
  window.


pkgId: e5a5ccce5146eb9f124819405fa9bbefff6c2dc291183e6bc9669b44bfc986e1
name: perl-Term-Cap
arch: src
version: 1.17
epoch: 0
release: 457.fc33
summary: Perl termcap interface
url: https://metacpan.org/release/Term-Cap
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-40.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Cap-1.17-457.fc33.src.rpm
checksum_type: sha256
description:
  These are low-level functions to extract and use capabilities from a terminal
  capability (termcap) database.


pkgId: 747d60352e859856c4bc8a1fa4ae67b45ca04170c6b5f7c43dcfcd44d1b29d4e
name: perl-Term-Chrome
arch: src
version: 2.01
epoch: 0
release: 9.fc33
summary: DSL for colors and other terminal chrome
url: https://metacpan.org/release/Term-Chrome
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-35.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Chrome-2.01-9.fc33.src.rpm
checksum_type: sha256
description:
  Term::Chrome is a domain-specific language (DSL) for terminal decoration
  (colors and other attributes) in Perl.


pkgId: b88ccd6122ce26d69e50e9871f08c7b483c08413a538fc54c608cf8f7b489f31
name: perl-Term-Clui
arch: src
version: 1.76
epoch: 0
release: 4.fc33
summary: Perl module offering a Command-Line User Interface
url: https://metacpan.org/release/Term-Clui
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-19.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Clui-1.76-4.fc33.src.rpm
checksum_type: sha256
description:
  Term::Clui offers a high-level user interface to give the user of command-
  line applications a consistent "look and feel". Its metaphor for the
  computer is as a human-like conversation-partner, and as each
  question/response is completed it is summarized onto one line, and remains
  on screen, so that the history of the session gradually accumulates on the
  screen and is available for review, or for cut/paste. This user interface
  can therefore be intermixed with standard applications which write to
  STDOUT or STDERR, such as make, pgp, rcs etc.


pkgId: b77901d1e3d17a0bf952f65db8f60328dfd97ef99b39ad747be8f1134e88ac69
name: perl-Term-Completion
arch: src
version: 1.00
epoch: 0
release: 22.fc33
summary: Read one line of user input, with convenience functions
url: https://metacpan.org/release/Term-Completion
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-23.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Completion-1.00-22.fc33.src.rpm
checksum_type: sha256
description:
  Term::Completion is an extensible, highly configurable replacement for
  the venerable Term::Complete package. It is object-oriented and thus allows
  subclassing. Two derived classes are Term::Completion::Multi and
  Term::Completion::Path. A prompt is printed and the user may enter one line
  of input, submitting the answer by pressing the ENTER key.


pkgId: 6b55f2c941573c9cb3e85a6e67df03fde0bbf11f01c9de24c717ba05112fae9a
name: perl-Term-EditorEdit
arch: src
version: 0.0016
epoch: 0
release: 19.fc33
summary: Edit a document via $EDITOR
url: https://metacpan.org/release/Term-EditorEdit
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-29.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-EditorEdit-0.0016-19.fc33.src.rpm
checksum_type: sha256
description:
  Term::EditorEdit is a tool for prompting the user to edit a piece of text
  via $VISUAL or $EDITOR and return the result.


pkgId: 49d90f6f3ec85a36bcbd4c961ed8e0d0436850e87cbc72afa8481503260c4b00
name: perl-Term-Encoding
arch: src
version: 0.03
epoch: 0
release: 6.fc33
summary: Detect encoding of the current terminal
url: https://metacpan.org/release/Term-Encoding
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-28.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Encoding-0.03-6.fc33.src.rpm
checksum_type: sha256
description:
  Term::Encoding is a simple Perl module to detect an encoding the current
  terminal expects, in various ways.


pkgId: 9af0b0d40d215bc4e319c8dfb11a06953ce51a3c331ea6aaf90db7a04dffa58b
name: perl-Term-ProgressBar
arch: src
version: 2.22
epoch: 0
release: 10.fc33
summary: Provide a progress meter on a standard terminal
url: https://metacpan.org/release/Term-ProgressBar
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ProgressBar-2.22-10.fc33.src.rpm
checksum_type: sha256
description:
  Term::ProgressBar provides a simple progress bar on the terminal, to let
  the user know that something is happening, roughly how much stuff has been
  done, and maybe an estimate at how long remains.


pkgId: 26fd2adecbd722fc37e551525414d1856fa3519ebd1dc194e1a82917f9a426ce
name: perl-Term-ProgressBar-Quiet
arch: src
version: 0.31
epoch: 0
release: 20.fc33
summary: Provide a progress meter if run interactively
url: https://metacpan.org/release/Term-ProgressBar-Quiet
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-08.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ProgressBar-Quiet-0.31-20.fc33.src.rpm
checksum_type: sha256
description:
  Term::ProgressBar is a wonderful module for showing progress bars on the
  terminal. This module acts very much like that module when it is run
  interactively. However, when it is not run interactively (for example,
  as a cron job) then it does not show the progress bar.


pkgId: a353d6977559282afaa41fe2c2a9973ec076e96644baae2b7cc892709accd340
name: perl-Term-ProgressBar-Simple
arch: src
version: 0.03
epoch: 0
release: 20.fc33
summary: Simpler progress bars
url: https://metacpan.org/release/Term-ProgressBar-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-26.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ProgressBar-Simple-0.03-20.fc33.src.rpm
checksum_type: sha256
description:
  Progress bars are handy - they tell you how much work has been done, how
  much is left to do and estimate how long it will take. This module does the
  right thing in almost all cases in a really convenient way.


pkgId: dca48e2b74c9df2c098a8ea954b046f5f2328fc29598897214aaac0683f55c74
name: perl-Term-Prompt
arch: src
version: 1.04
epoch: 0
release: 32.fc33
summary: Perl extension for prompting a user for information
url: https://metacpan.org/release/Term-Prompt
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-22.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Prompt-1.04-32.fc33.src.rpm
checksum_type: sha256
description:
  This main function of this module is to accept interactive input. You
  specify the type of inputs allowed, a prompt, help text and defaults and it
  will deal with the user interface, (and the user!), by displaying the
  prompt, showing the default, and checking to be sure that the response is
  one of the legal choices. Additional 'types' that could be added would be a
  phone type, a social security type, a generic numeric pattern type...


pkgId: a58f2e66c3295ddbc13fee4d685f6aafce0773982e4ba45324a223009b3b6408
name: perl-Term-ReadLine-Perl
arch: src
version: 1.0303
epoch: 0
release: 26.fc33
summary: Readline implementation in Perl
url: https://metacpan.org/release/Term-ReadLine-Perl
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ReadLine-Perl-1.0303-26.fc33.src.rpm
checksum_type: sha256
description:
  This is a quick implementation of the minimal interface to Readline libraries.
  The implementation is made in Perl (mostly) by Jeffrey Friedl. The only thing
  this library does is to make it conformant (and add some minimal changes, like
  using Term::ReadKey if present, and correct work under xterm).


pkgId: 8c251bcd8594b75de35201bd784a4b489ff938e09d863618b7731ebff6de740f
name: perl-Term-ReadPassword
arch: src
version: 0.11
epoch: 0
release: 35.fc33
summary: Asking the user for a password
url: https://metacpan.org/release/Term-ReadPassword
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ReadPassword-0.11-35.fc33.src.rpm
checksum_type: sha256
description:
  This module lets you ask the user for a password in the traditional way,
  from the keyboard, without echoing.


pkgId: 6082413d3856b9d9e41730bfedf229d0da5c6e39056e99fd28f89929b26b38d3
name: perl-Term-Shell
arch: src
version: 0.11
epoch: 0
release: 6.fc33
summary: Simple command-line shell framework
url: https://metacpan.org/release/Term-Shell
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-09.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Shell-0.11-6.fc33.src.rpm
checksum_type: sha256
description:
  Term::Shell lets you write simple command-line shells. All the boring
  details like command-line parsing, terminal handling, and tab completion
  are handled for you.


pkgId: 95daecb478998bcb0ac57e02b682e10af478551d22b86a94443f83f8124d2f61
name: perl-Term-ShellUI
arch: src
version: 0.92
epoch: 0
release: 20.fc33
summary: Perl module to implement a full-featured shell-like command line environment
url: https://metacpan.org/release/Term-ShellUI
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-11.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-ShellUI-0.92-20.fc33.src.rpm
checksum_type: sha256
description:
  Term::ShellUI is a Perl module, which tries to make every feature that
  one would expect to see in a fully interactive shell trivial to implement.
  It uses the history and autocompletion features of Term::ReadLine to present
  a sophisticated command-line interface to the user. You simply declare your
  command set and let ShellUI take care of the heavy lifting.


pkgId: 77b09a6c750563bcb4a203d8b7753bd19f5229e37d744d555b07610f1a6c3169
name: perl-Term-Size
arch: src
version: 0.209
epoch: 0
release: 7.fc33
summary: Simple way to get terminal size
url: https://metacpan.org/release/Term-Size
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-16.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Size-0.209-7.fc33.src.rpm
checksum_type: sha256
description:
  Term::Size is a Perl module which provides a straightforward way to
  retrieve the terminal size.

  Both functions take an optional filehandle argument, which defaults
  to *STDIN{IO}. They both return a list of two values, which are the
  current width and height, respectively, of the terminal associated with
  the specified filehandle.

  Term::Size::chars returns the size in units of characters, whereas
  Term::Size::pixels uses units of pixels.


pkgId: b3052b980d3b2ee131ccfc34f8dc172674edf8c14bc06c8e39a0b08707868126
name: perl-Term-Size-Any
arch: src
version: 0.002
epoch: 0
release: 32.fc33
summary: Retrieve terminal size
url: https://metacpan.org/release/Term-Size-Any
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-x86-04.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Size-Any-0.002-32.fc33.src.rpm
checksum_type: sha256
description:
  This is a unified interface to retrieve terminal size. It loads one module
  of a list of known alternatives, each implementing some way to get the
  desired terminal information. This loaded module will actually do the job
  on behalf of Term::Size::Any.


pkgId: 2bd09b1c8135ad4dd5b937bfb1c7f48da3ba12ddab0c06bc45145dec675ecc1e
name: perl-Term-Size-Perl
arch: src
version: 0.031
epoch: 0
release: 9.fc33
summary: Perl extension for retrieving terminal size (Perl version)
url: https://metacpan.org/release/Term-Size-Perl
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-31.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-Size-Perl-0.031-9.fc33.src.rpm
checksum_type: sha256
description:
  Yet another implementation of Term::Size. Now in pure Perl, with the
  exception of a C probe run on build time.


pkgId: df6b762019da971d8f61bd6688acc8571c3570ecebdbf2416d3772a891df3475
name: perl-Term-UI
arch: src
version: 0.46
epoch: 0
release: 17.fc33
summary: Term::ReadLine user interface made easy
url: https://metacpan.org/release/Term-UI
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-05.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Term-UI-0.46-17.fc33.src.rpm
checksum_type: sha256
description:
  Term::UI is a transparent way of eliminating the overhead of having to
  format a question and then validate the reply, informing the user if the
  answer was not proper and re-issuing the question.


pkgId: d5500d2fc13c9b10ded5ca965cb7406678a10f253ca1c31e3903ddba4641b9b7
name: perl-TermReadKey
arch: src
version: 2.38
epoch: 0
release: 8.fc33
summary: A perl module for simple terminal control
url: https://metacpan.org/release/TermReadKey
rpm_license: (Copyright only) and (Artistic or GPL+)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a32-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-TermReadKey-2.38-8.fc33.src.rpm
checksum_type: sha256
description:
  Term::ReadKey is a compiled perl module dedicated to providing simple
  control over terminal driver modes (cbreak, raw, cooked, etc.)
  support for non-blocking reads, if the architecture allows, and some
  generalized handy functions for working with terminals.  One of the
  main goals is to have the functions as portable as possible, so you
  can just plug in "use Term::ReadKey" on any architecture and have a
  good likelyhood of it working.


pkgId: 4310ec8111db439ea3b265bb1e20b5fb94e6eb240926c959191728fdd5064fc9
name: perl-Test-API
arch: src
version: 0.010
epoch: 0
release: 9.fc33
summary: Test a list of subroutines provided by a module
url: https://metacpan.org/release/Test-API
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-30.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-API-0.010-9.fc33.src.rpm
checksum_type: sha256
description:
  This simple test module checks the subroutines provided by a module. This is
  useful for confirming a planned API in testing and ensuring that other
  functions aren't unintentionally included via import.


pkgId: b720d1723880670d2b51a05564f409763ad728457f0bbfbc24338874e3b9f839
name: perl-Test-Able
arch: src
version: 0.11
epoch: 0
release: 27.fc33
summary: xUnit with Moose
url: https://metacpan.org/release/Test-Able
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-17.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Able-0.11-27.fc33.src.rpm
checksum_type: sha256
description:
  An xUnit style testing framework inspired by Test::Class and built using
  Moose. It can do all the important things Test::Class can do and more. The
  prime advantages of using this module instead of Test::Class are
  flexibility and power. Namely, Moose.


pkgId: 2ad63683d2cfac89ead796447e028a007e94dc3c9cc2f936c277b8c78e384c47
name: perl-Test-Able-Runner
arch: src
version: 1.002
epoch: 0
release: 19.fc33
summary: Use Test::Able without a bunch of boilerplate
url: https://metacpan.org/release/Test-Able-Runner
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-18.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Able-Runner-1.002-19.fc33.src.rpm
checksum_type: sha256
description:
  I like Test::Able. I really don't like having to copy my boilerplate test
  runner and modify it when I use it in a new project. This provides a basic
  test runner for your testable tests that takes care of the basics for you.
  You can extend it a bit to customize things if you like as well. Let me
  know if you want this to do something else.


pkgId: 687657e091bcdb84acf9c5962594338f3411fca3412e94322dbf9ffd4ffa932d
name: perl-Test-Abortable
arch: src
version: 0.002
epoch: 0
release: 12.fc33
summary: Simple system for handling some exceptions in tests
url: https://metacpan.org/release/Test-Abortable
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-27.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Abortable-0.002-12.fc33.src.rpm
checksum_type: sha256
description:
  Test::Abortable provides a simple system for catching some exceptions and
  turning them into test events.


pkgId: 31a24d5d3c668d8f9e990398cc6c6e114cce4c7f31f3159d6565beede97c1777
name: perl-Test-Alien
arch: src
version: 0.15
epoch: 0
release: 12.fc33
summary: Testing tools for Alien modules
url: https://metacpan.org/release/Test-Alien
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-12.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Alien-0.15-12.fc33.src.rpm
checksum_type: sha256
description:
  This package provides tools for testing Alien Perl modules. It has hooks to
  work easily with Alien::Base based modules, but can also be used via the
  synthetic interface to test non Alien::Base based Alien modules.


pkgId: 84e6364f881e19c94eec83a68946e062ec4a3f10738d6e81aea184e04385fad8
name: perl-Test-Apocalypse
arch: src
version: 1.006
epoch: 0
release: 19.fc33
summary: Apocalypse's favorite tests bundled into a simple interface
url: https://metacpan.org/release/Test-Apocalypse
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Apocalypse-1.006-19.fc33.src.rpm
checksum_type: sha256
description:
  This module greatly simplifies common author tests for modules heading towards
  CPAN. I was sick of copy/pasting the tons of t/foo.t scripts + managing them
  in every distribution. I thought it would be nice to bundle all of it into one
  module and toss it on CPAN :) That way, every time I update this module all of
  my distributions would be magically updated!


pkgId: 899b0b32c2bb60a6717ed0ea11723912634957bc7d8611d851bfc820225913d2
name: perl-Test-Assert
arch: src
version: 0.0504
epoch: 0
release: 30.fc33
summary: Assertion methods for those who like JUnit
url: https://metacpan.org/release/Test-Assert
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-21.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Assert-0.0504-30.fc33.src.rpm
checksum_type: sha256
description:
  This class provides a set of assertion methods useful for writing tests.
  The API is based on JUnit4 and Test::Unit and the methods die on failure.


pkgId: 18867b34ff5e49b969d7168b978e1a9054f330fdf5d6b34b64aedaac7217f8e3
name: perl-Test-Assertions
arch: src
version: 1.054
epoch: 0
release: 33.fc33
summary: Simple set of building blocks for both unit and runtime testing
url: https://metacpan.org/release/Test-Assertions
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-x86-25.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Assertions-1.054-33.fc33.src.rpm
checksum_type: sha256
description:
  Test::Assertions provides a convenient set of tools for constructing tests,
  such as unit tests or run-time assertion checks (like C's ASSERT macro).
  Unlike some of the Test:: modules available on CPAN, Test::Assertions is
  not limited to unit test scripts; for example it can be used to check
  output is as expected within a benchmarking script. When it is used for
  unit tests, it generates output in the standard form for CPAN unit testing
  (under Test::Harness).


pkgId: 85f12482fea788befabd7c28483e7ee76fd676185b1b084d00def3763fc2269b
name: perl-Test-AutoLoader
arch: src
version: 0.03
epoch: 0
release: 24.fc33
summary: Testing utility for autosplit/autoloaded modules
url: https://metacpan.org/release/Test-AutoLoader
rpm_license: GPL+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-38.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-AutoLoader-0.03-24.fc33.src.rpm
checksum_type: sha256
description:
  This single-purpose module attempts to eliminate uncaught syntax errors or
  other obvious goofs in subroutines that are autosplit, and hence not looked
  at by perl -c Module.pm. Ideally, this module will become unnecessary as
  you reach full coverage of those subroutines in your unit tests. Until that
  happy day, however, this should provide a quick and dirty backstop for
  embarrassing typos.


pkgId: da15d1a307be0b4bed7270702c0108d47707eaa954add659731fd9193a7ff514
name: perl-Test-Base
arch: src
version: 0.89
epoch: 0
release: 9.fc33
summary: Data Driven Testing Framework
url: https://metacpan.org/release/Test-Base
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-ppc64le-13.iad2.fedoraproject.org
rpm_packager: Fedora Project
location_href: Packages/p/perl-Test-Base-0.89-9.fc33.src.rpm
checksum_type: sha256
description:
  Testing is usually the ugly part of Perl module authoring. Perl gives you a
  standard way to run tests with Test::Harness, and basic testing primitives
  with Test::More. After that you are pretty much on your own to develop a
  testing framework and philosophy. Test::More encourages you to make your
  own framework by subclassing Test::Builder, but that is not trivial.

  Test::Base gives you a way to write your own test framework base class that
  *is* trivial.


